Науковий вісник НГУ

Investigation of the possibility of reducing errors in determining the coordinates of objects indoors by multi-frequency method

• 
• 

User Rating:  / 1

PoorBest 

Details

Category: Content №1 2021

Last Updated on 05 March 2021

Published on 30 November -0001

Hits: 2609

Authors:

Zh.K.Mendakulov, orcid.org/0000-0002-3818-404X, Satbayev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

S.Morosi, orcid.org/0000-0002-0145-8406, University of Florence, Florence, the Republic of Italy, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.Martinelli, orcid.org/0000-0002-8509-5322, University of Florence, Florence, the Republic of Italy, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

K.Zh.Isabaev, orcid.org/0000-0001-5183-3668, Military Engineering Institute of Radio Electronics and Communications, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (1): 137 - 144

https://doi.org/10.33271/nvngu/2021-1/137

Abstract:

Purpose. To investigate the influence of LOS/NLOS conditions on the radio signal propagation and the possibility of interference mitigation by using multi-frequency method of transmitting and receiving for positioning tasks in enclosed spaces. To check the difference in measurement accuracy when receiving a signal at one frequency from receiving a signal at four frequencies by combining the measurement results of individual frequencies into one reading. To check the influence of various obstacles on the signal passing.

Methodology. Design at the laboratory of UHF generator and BLE beacons with the ability to set broadcast frequencies and adjust transmission power. Application of a multi-frequency transmission and reception method.

Findings. The possibility of increasing the accuracy of positioning of objects in closed rooms, including mine workings, through the use of multi-frequency radio signals is investigated. It is shown that the influence of re-reflections of radio signals from the walls of structures, from obstacles of various origins, and the associated interference, can be reduced by using averaged values of attenuation at different frequencies. The use of radio emitters with many frequencies as beacons can provide new possibilities in solving the problem of positioning objects in closed rooms.

Originality. The work proposes a method for combining measurement results of individual frequencies into one reading, which will reduce interference. Multi-frequency transmission method and multi-frequency reception method are proposed to reduce the influence of interference caused at one frequency on the overall signal level.

Practical value. The experimental results obtained can be used at deploying positioning systems in closed rooms, including mine workings.

Keywords: Bluetooth Low Energy BLE, line-of-sight LOS, non-line-of-sight NLOS, received signal strength indicator RSSI, beacon, USB generator, spectrum analyzer

References.

1. Minghao Si, Yunjia Wang, Shenglei Xu, Meng Sun, & Hongji Cao (2020). A WiFi FTMbased indoor positioning method with LOS/NLOS identification. Applied Sciences, 10, 956. https://doi.org/10.3390/app10030956.

2.GOST P 551542012 Mining equipment. Multifunctional safety systems of coal mines. General technical requirements (2014). Moscow: Standartinform. Retrieved from https://docs.cntd.ru/document/1200103247.

3.Complex for positioning personnel and transport with an alert function for personnel Argus-control (n.d.). Retrieved from https://shaht.com.ua/argus.html.

4.Grachev, A.Yu., Novikov, A.V., Goffart, T.V., & Urusov,L.V. (2016). Multifunctional safety systems and personnel positioning in mines. Mining Industry, 2(126), 95-101.

5. Zhao, X., Xiao, Z., Markham, A., Trigoni, N., & Ren, Y. (2014). Does BTLE measure up against WiFi? A comparison of indoor location performance. European Wireless 2014. Retrieved from http://www.cs.ox.ac.uk/files/6679/06843088.pdf.

6. Thrybom, L., Neander, J., Hansen, E., & Landerns, K. (2015). Future challenges of positioning in underground mines. IFAC (International Federation of Automatic Control)-PapersOnLine, 48-10(2015), 222-226.

7. Baek, J., Choi, Yo., Lee, Ch., Suh, J., & Lee, Sh. (2017). BBUNS: Bluetooth beacon-based underground navigation system to support mine haulage operations. Minerals, 7, 228. https://doi.org/10.3390/min7110228.

8. Baek, J., & Choi, Yo. (2020). Smart glasses-based personnel proximity warning system for improving pedestrian safety in construction and mining sites. International Journal of Environmental Research and Public Health, 17, 1422. https://doi.org/10.3390/ijerph17041422.

9. Jung, J., & Choi, Yo. (2017). Measuring transport time of mine equipment in an underground mine using a Bluetooth Beacon system. Minerals, 7, 1. https://doi.org/10.3390/min7010001.

10. Kim, S.-M., Choi, Yo., & Suh, J. (2020). Applications of the open-source hardware Arduino platform in the mining industry: a review. Applied Sciences, 10(14), 5018. https://doi.org/10.3390/app10145018.

11. Song, M., & Qian, J. (2020). Underground coal mine fingerprint positioning based on the MA-VAP method. Sensors, 20, 5401. https://doi.org/10.3390/s20185401.

12. Baek, J., & Choi, Yo. (2018). Bluetooth-Beacon-based underground proximity warning system for preventing collisions inside tunnels. Applied Sciences, 8, 2271. https://doi.org/10.3390/app8112271.

13. Voronov, R.V., Galov, A.S., Moschevikin, A.P., Voronova, A.M., & Stepkina, T.V. (2014). A method for localisation of a mobile unit in a mine. Modern problems of science and education, 4(155). Retrieved from http://www.science-education.ru/pdf/2014/4/13876.pdf.

14. Li, G., Geng, E., Ye, Zh., Xu, Yo., Lin, J., & Pang, Yu. (2018). Indoor positioning algorithm based on the improved RSSI distance model. Sensors, 18, 2820. https://doi.org/10.3390/s18092820.

15. Huang, B., Liu, J., Sun, W., & Yang, F. (2019). A robust indoor positioning method based on Bluetooth Low Energy with separate channel information. Sensors, 19, 3487. https://doi.org/10.3390/s19163487.

16. Tomic, S., Beko, M., Dinis, R., & Bernardo, L. (2018). On target localization using combined RSS and AoA measurements. Sensors, 18, 1266. https://doi.org/10.3390/s18041266.

17. Giuliano, R., Cardarilli, G.C., Cesarini, C., Di Nunzio,L., Fallucchi, F., Fazzolari, R., Mazzenga, F. ..., & Vizzarri, A. (2020). Indoor localization system based on Bluetooth Low Energy for museum applications. Electronics, 9, 1055. https://doi.org/10.3390/electronics9061055.

18. Punik, M., Galun, M., & umak, B. (2020). Improved Bluetooth Low Energy sensor detection for indoor localization services. Sensors, 20, 2336. https://doi.org/10.3390/s20082336.

19. Zhuang, Yu., Yang, J., Li, Yo., Qi, L., & El-Sheimy, N. (2016). Smartphone based Indoor Localization with Bluetooth Low Energy Beacons. Sensors, 16, 596. https://doi.org/10.3390/s16050596.

20. Zhao, X., Geng, S., & Coulibaly, B.M. (2013). Path-loss model including LOS-NLOS transition regions for indoor corridors at 5GHz. IEEE Antennas and Propagation Magazine, 55(3). https://doi.org/10.1109/MAP.2013.6586668.

21. Zampella, F., Ruiz, A.R.J., & Granja, F.S. (2015). Indoor positioning using efficient map matching, RSS measurements, and an improved motion model. IEEE Transactions on Vehicular Technology, 64, 1304-1317. https://doi.org/10.1109/TVT.2015.2391296.

22. Jo, H.J., & Kim, S. (2018). Indoor smartphone localization based on LOS and NLOS identification. Sensors, 18, 3987. https://doi.org/10.3390/s18113987.

• < Prev
• Next >