- 1. Enhancement of sorption of the azoic dye (Azucryl Red) by natural and calcined hyper-aluminous kaolins
- (Content №1 2024)
- ... is endothermic spontaneous which is enhanced at higher temperatures. Originality. The heat treatments of the different kaolins at 400 °C enhance the adsorption process. Therefore, the results indicate ...
- Created on 29 February 2024
- 2. Application of the stereomicrophotogrammetric method for the complex study of the Al-Cu-Mg alloys system
- (Content №4 2023)
- ... work, the mechanical properties of Al-Cu-Mg samples after mild (recrystallization) annealing and subsequent natural aging and a sample without heat treatment were experimentally determined. At the next ...
- Created on 28 August 2023
- 3. Minimization of dynamic changes in the tension of long products behind the outlet cage in rolling stock production in coils
- (Content №6 2022)
- ... Retrieved from https://goo.su/BOPUCNU. 4.Fabbro, C., Durisotti, M., & Simecek, P. (2016). DLPP Quality management software tool for rolling and heat treatment optimization. TMP 5th International ...
- Created on 25 December 2022
- 4. Compound physical and mechanical effects stimulating metastable diamond formation
- (Content №4 2021)
- ... 20. Sobolev, V.V., Taran, Yu.N., & Gubenko, S.I. (1993). Synthesis of diamond in cast iron. Metal Science and Heat Treatment, 35(1), 3-9. https://doi.org/10.1007/BF00770062. 21. Nikolskiy, N.S. (1987). ...
- Created on 23 August 2021
- 5. Influence of technological process parameters on qualitative characteristics of coal thermolysis products
- (Content №1 2021)
- ... quality characteristics of the products of heat treatment of long-flame coal under various temperature effects were determined. Differences in the composition of decomposition products were noted and their ...
- Created on 05 March 2021
- 6. The development of technological solutions on mining and processing brown coal to improve its quality
- (Contens №6 2019)
- ... at energy production enterprises have been established: the mixture ash content for the fuel working state (Ar) after heat treatment made 50.2 %, and after separation ‒ 17.72 %; lower combustion heat increased ...
- Created on 23 December 2019
- 7. Analytical study of heat transfer in absorptive horizons of borehole at forming cryogenic protecting of the plugging material
- (Mining)
- ... (a frozen layer around rocks around a borehole) to the heat treatment time of the absorptive horizon of a borehole and refrigerant temperature was defined. Practical value. Innovative cryogenic technology ...
- Created on 24 July 2017
- 8. Perspectives of improving physical and mechanical properties of thermal coatings by electropulse exposure
- (Geotechnical and mining mechanical engineering, machine building)
- ... obtained in the work, namely the definition of the scheme of the connection of high-voltage pulse, the optimal parameters of EPE during electric arc and plasma spraying and subsequent heat treatment provide ...
- Created on 16 March 2017
- 9. The research of the process of iron ore pellets layer heat treatment in the combustion chamber of a belt kiln
- (Information technologies, systems analysis and administration)
- ... The simulation results allow using the obtained data for the NSC SAR process of thermal treatment of pellets. The main modes of heat treatment of pellets in the layer were modeled based on the analysis ...
- Created on 30 October 2015
- 10. Calculation of the balanced mode of the electric drive of a sucker rod oil pump for a marginal well
- (Electrical complexes and systems)
- ... Orliv, V.S. (2005), “Optimization operation time of oil wells between repeated heat treatment”, Rozrobka i Ekspluatatsiya Naftovykh i Gazovykh Rodovyshch, no.3(12), pp. 67–77. 5. Маляр А.В. ...
- Created on 23 September 2014
- 11. Effectiveness of thermomechanical calibration and determination of residual stresses in the shell nose cone of Cyclone-4
- (Geotechnical and mining mechanical engineering, machine building)
- ... induktsyonnogo nagreva [Technology of Heat Treatment of Metals with Induction Heating], Mechanical Engineering, St. Petersburg, Russia. 4. Залишкові напруги у процесі виготовлення циліндричних ...
- Created on 21 March 2014
- 12. Basic grades of structural carbon steels used for car production and repair
- (Mechanization of mining production, mining machines and systems, mining mechanical engineering)
- Authors: V.Ye. Olishevskaya, G.S. Olishevskiy, A.A. Savchenko. Basic grades of structural carbon steel, used in motor-car industry, has been analyzed. Material of the article ...
- Created on 25 December 2012
- 13. Ways to enhance the reliability of wheel pairs of locomotive transport
- (Geotechnical and mining mechanical engineering, machine building)
- ... of steel, production and heat treatment technology for the wheels, takind into account the wheel-rail contact. Originality. We have analyzed contact interaction between wheel and rail in real conditions ...
- Created on 08 November 2012