Influence of drilling mud pulsations on well cleanout efficiency
/ 0
- Details
- Category: Content №5 2023
- Last Updated on 27 October 2023
- Published on 30 November -0001
- Hits: 2149
Authors:
I.I.Chudyk1, orcid.org/0000-0002-7402-6962, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
I.F.Dudych*1, orcid.org/0000-0003-2917-0612, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
D.A.Sudakova2, orcid.org/0000-0002-8676-4006, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Yu.D.Voloshyn1, orcid.org/0000-0002-0582-1778, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.V.Bogoslavets1, orcid.org/0000-0001-9622-4065, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (5): 048 - 053
https://doi.org/10.33271/nvngu/2023-5/048
Abstract:
Purpose. Determination of the influence of the non-stationary flow regime of the drilling mud on the efficiency of cleaning the wellbore in the annulus from drill cuttings.
Methodology. The study on the carrying capacity of the drilling mud in a laboratory installation is carried out by simulating the process of its pulsations at different frequencies. The choice of the studied frequencies was made on the basis of previous studies. The evaluation of the influence of factors on the efficiency of rock removal was carried out using Latin experimental plans, which allowed us to evaluate the influence of the selected factors with a minimum number of experiments without losing the quality of the result.
Findings. The influence of factors (mud flow rates, eccentric placement of the drill string, plastic viscosity of the drilling mud, pulsation frequency, rotation of the drill string) on the efficiency of cuttings removal along the annular space of the wellbore is analyzed. Three factors with the best interaction were found, which made it possible to build dependencies of their influence on the efficiency of rock removal on the surface. The effect of changing the frequency of pulsations of the drilling mud has been studied, and graphical dependences of their influence on the decrease in the volume of rock particles in the annular space have been obtained.
Originality. Based on the results of experimental studies, the effectiveness of the impact of drilling mud pulsations on cleaning the well from rock particles has been proven.
Practical value. The effectiveness of the use of drilling mud pulsations for hydrotransportation of cuttings along the horizontal section of the wellbore has been confirmed.
Keywords: drilling mud, carrying capacity, pulsations, well, cuttings
References.
1. Shatskyi, I., Velychkovych, A., Vytvytskyi, I., & Seniushkovych, M. (2019). Analytical models of contact interaction of casing centralizers with well wall. Engineering Solid Mechanics, 355-366. https://doi.org/10.5267/j.esm.2019.6.002.
2. Shatskyi, I., Vytvytskyi, I., Senyushkovych, M., & Velychkovych, A. (2019). Modelling and improvement of the design of hinged centralizer for casing. IOP Conference Series: Materials Science and Engineering, 564, 012073. https://doi.org/10.1088/1757-899x/564/1/012073.
3. Chudyk, I. I., Pastukh, A. M., & Dudych, I. F. (2020). Research of technical and technological parameters’ influence onto well cleaning quality during cutting out of casing window. Molodyy vchenyy, 2, 130-134. Retrieved from http://nbuv.gov.ua/UJRN/molv_2016_2_34.
4. Nazari, T., Hareland, G., & Azar, J. (2010). Review of Cuttings Transport in Directional Well Drilling: Systematic Approach. SPE Western Regional Meeting, Anaheim, California, USA. https://doi.org/10.2118/132372-MS.
5. Liu, S., Li, G., Shi, H., Tian, S., & Zhao, X. (2015). Application of hydraulic pulsed jet generator for rop enhancement in shale gas well. 12 th Offshore Mediterranean Conference and Exhibition in Ravenna. Retrieved from https://www.onepetro.org/conference-paper/OMC-2015-394.
6. Chudyk, I. I., Dudych, I. F., & Tokaruk, V. V. (2020). Modeling the well flushing process. Prospecting and Development of Oil and Gas Fields, 2(75), 62-68. https://doi.org/10.31471/1993-9973-2020-2(75)-62-68.
7. Sudakov, А., Dreus, A., Kuzin, Y., Sudakova, D., Ratov, B., & Khomenko, O. (2019). A thermomechanical technology of borehole wall isolation using a thermoplastic composite material. E3S Web of Conferences, 109, 00098. Essays of Mining Science and Practice. https://doi.org/10.1051/e3sconf/201910900098.
8. Dzyubyk, A., Sudakov, A., Dzyubyk, L., & Sudakova, D. (2019). Ensuring the specified position of multisupport rotating units when dressing mineral resources. Mining of Mineral Deposits, 13(4), 91-98. https://doi.org/10.33271/mining13.04.091.
9. Xu, J., Ozbayoglu, E. M., Miska, S., Yu, M., & Takach, N. (2013). Cuttings Transport with Foam in Highly Inclined Wells at Simulated Downhole Conditions. Archives of Mining Sciences, 58(2), 481-494. https://doi.org/10.2478/amsc-2013-0032.
10. Altindal, M. C., Ozbayoglu, E., Miska, S., Yu, M., Takach, N., & May, R. (2017). Impact of Viscoelastic Characteristics of Oil Based Muds/Synthetic Based Muds on Cuttings Settling Velocities. Proceedings of the ASME 2017 36 th International Conference on Ocean, Offshore and Arctic Engineering. https://doi.org/10.1115/OMAE2017-62129.
11. Chudyk, I. I., Bogoslavets, V. V., & Dudych, I. F. (2016). Biopolymer-silicate drilling fluid for drilling horizontal wells. Prospecting and Development of Oil and Gas Fields, 4(61), 34-42. Retrieved from https://rrngr.nung.edu.ua/index.php/rrngr/article/view/181/158.
12. Duan, M., Miska, S., Yu, M., Takach, N., Ahmed, R. M., & Hallman, J. (2010). Experimental Study and Modeling of Cuttings Transport Using Foam with Drillpipe Rotation. SPE Drilling & Completion, 25(03), 352-362. https://doi.org/10.2118/116300-MS.
13. Jinkai, Z., Gensheng, L., Xianzhi, S., & Haizhu, W. (2013). Analysis of Herschel-Bulkely fluid flow in rotating drill string. SOCAR Proceedings, (2), 15-23. https://doi.org/10.5510/ogp20130200150.
14. Garcia, S., Mendez, M., Ahmed, R., Karami, H., Nasser, M., & Ibnelwaleed, H. (2022). Effects of Pipe Rotation on the Performance of Fibrous Fluids in Horizontal Well Cleanout. SPE Annual Technical Conference and Exhibition, Houston, Texas, USA. https://doi.org/10.2118/210347-MS.
15. Ignatenko, Y., Bocharov, O., Gavrilov, A., & May, R. (2018). Steady-state cuttings transport simulation inhorizontalboreholeannulus.Proceedings of the International Conferenceon Offshore Mechanics and Arctic Engineering. https://doi.org/10.1115/OMAE2018-77266.
16. Li, G., Shi, H., Niu, J., Huang, Z., Tian, S., & Song, X. (2010).Hydraulic Pulsed Cavitating Jet Assisted Deep Drilling: An Approach to Improve Rate of Penetration. International Oil and Gas Conference and Exhibition in China. https://doi.org/10.2118/130829-MS.
17. Fu, J., Li, G., Shi, H., Niu, J., & Huang, Z. (2012). A Novel Tool To Improve the Rate of Penetration-Hydraulic-Pulsed Cavitating-Jet Generator. SPE Drilling & Completion, 27(03), 355-362. https://doi.org/10.2118/162726-PA.
18. Wei, M., Li, G., Shi, H., Shi, S., Li, Z., & Zhang, Yi. (2016). Theories and Applications of Pulsed-Jet Drilling With Mechanical Specific Energy. SPE Journal, 21(01), 303-310. https://doi.org/10.2118/174550-PA.
19. Liedtka, J., & Chen, E. (2022). The Design of Experiments. SSRN Electronic Journal. https://doi.org/10.2139/ssrn.4109331.
20. Setyo Pradana, E., & Sulistiyowati, W. (2022). Literature Review: Use of the Taguchi Method for Quality Improvement. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 6(2), 85-96. https://doi.org/10.21070/prozima.v6i2.1575.
Newer news items:
- The legal mechanism for environmental protection in Ukraine - 27/10/2023 19:19
- Radionuclide content in vegetation and soils in the impact zone of the railway track - 27/10/2023 19:19
- Creation of conceptual solutions for the manufacture of component freight wagons from composites - 27/10/2023 19:19
- Liquefaction of industrial zone against earthquake loading using laboratory and field measurements - 27/10/2023 19:19
- Optimization mathematical model of a contact air cooler for a mine turbocompressor - 27/10/2023 19:19
- Principles of transport means maintenance optimization: equipment cost calculation - 27/10/2023 19:19
- Combustion and detonation of paste fuel of rocket engine - 27/10/2023 19:19
- Alternative uses for crushed stone products generated to meet the raw material needs of asphalt production in Hungary - 27/10/2023 19:19
- Evaluation of coal mines’ rock mass gas permeability in the equivalent stress zone - 27/10/2023 19:19
- Geometric modelling of face processing surfaces by planetary executive devices of tunnelling machines - 27/10/2023 19:19
Older news items:
- Reducing the formation of asphaltene deposits and increasing the flow rates of oil wells - 27/10/2023 19:19
- Geophysical indicators of rare-metal ore content of Akmai-Katpar ore zone (Central Kazakhstan) - 27/10/2023 19:19
- Prospects for the detection of structures with hydrocarbon deposits along the geotraverse in the Shu-Sarysu sedimentary basin - 27/10/2023 19:19
- Predicted resource assessment of Central Kazakhsta ore districts based on airborne geophysical methods - 27/10/2023 19:19
- Influence of the geotectonic regime on property formation of coal in the northern edges of the Donetsk basin - 27/10/2023 19:19
- Structure and interpretation of the anomalous magnetic field of the South Turgay petroleum region - 27/10/2023 19:19
Archive