Науковий вісник НГУ

Composition and processing of sulphide lead-zinc ores from Chaabet El-Hamra mine (Setif, Algeria)

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №4 2021

Last Updated on 23 August 2021

Published on 30 November -0001

Hits: 5918

Authors:

M.Bourourou, orcid.org/0000-0002-5055-0858, Laboratory of Mining, Larbi Tebessi University, Tebessa, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.Bouzenzana, orcid.org/0000-0003-0440-9471, Larbi Tebessi University, Tebessa, Algeria

T.Batouche, orcid.org/0000-0002-1813-5590, Laboratory of Mining, Larbi Tebessi University, Tebessa, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.Benselhoub, orcid.org/0000-0001-5891-2860, Environmental Research Center CRE, Annaba, Algeria

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (4): 035 - 040

https://doi.org/10.33271/nvngu/2021-4/035

Abstract:

Purpose. In order to fully exploit the metal and facilitate its method of processing, we need an accurate knowledge of its composition, granular distribution, and association with unimportant and penalizing elements that we would like to get rid of, compared to the distribution of the element to extract by flotation method.

Methodology. The present experimental work proposes an approach to the mineralogical, chemical and particle size characterization, several analyzes have been carried out by Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS), X-ray Diffraction (XRD), Optical Microscopy (OM), Particle Size-Fraction Analysis (PSFA), and X-ray Fluorescence (XRF). These analyzes were submitted on samples of lead-zinc of different sizes as well as well-prepared fine powder of this ore; the zinc content of the raw material is about 5% Zn.

Findings. The results obtained by the mineralogical characterization and the particle size analysis reveal a very varied and irregular texture of the ore, consisting mainly of sulphides (sphalerite, galena, pyrite, marcasite), associated with carbonate gangue, mainly dolomite and calcite. The theoretical dimensions of the particles found in the fine grain size classes [-1 +0.053] mm. In addition, the conditions of the pulp using the following reagents: CuSO₄ activator, PAX collector, CaO regulator and the pine oil foamed, along with a pH modifier between 10.5 and 12 (11.8 optimal), improve the content of sulphide minerals, and increased the concentrate of sphalerite (ZnS) by foam Flotation with a maximum recovery and economically appropriate content (54% Zn concentrate).

Originality. Depending on the results of the analysis performed and the complete collection of data obtained in the laboratory, we aim to optimize the process of treating lead-zinc sulphide ore and give a more detailed reference source to specialists, researchers and metallurgists in field of mining in general and in the treatment of polymetallic lead-zinc ore in the area studied in particular.

Practical value. Benefit the values of beneficial minerals (concentrate of zinc and others sulphide), from different types of raw materials. The latter focuses on flotation as the main successful technique in the extraction of this type of lead-zinc minerals, but it requires constant research and careful examination of its elements and values in order to excel in this field of polymetallic-sulphide ore processing.

Keywords: lead-zinc ore, SEM/EDS analyses, sphalerite, flotation, mineral processing, optimization

References.

1. Wang, H., Wen, S., Han, G., & Feng, Q. (2019). Effect of copper ions on surface properties of ZnSO4-depressed sphalerite and its response to flotation. Separation and Purification Technology, 228, 115756. https://doi.org/10.1016/j.seppur.2019.115756.

2. Jia, Y., Huang, X., Huang, K., Wang, S., Cao, Z., & Zhong, H. (2019). Synthesis, flotation performance and adsorption mechanism of 3-(ethylamino)-N-phenyl-3-thioxopropanamide onto galena/sphalerite surfaces. Journal of Industrial and Engineering Chemistry, 77, 416-425. https://doi.org/10.1016/j.jiec.2019.05.005.

3. Deng, J. S., Mao, Y. B., Wen, S. M., Liu, J., Xian, Y. J., & Feng,Q.C. (2015). New influence factor inducing difficulty in selective flotation separation of Cu-Zn mixed sulfide minerals. International Journal of Minerals, Metallurgy, and Materials, 22(2), 111-115. https://doi.org/10.1007/s12613-015-1050-x.

4. Fontbote, L., Kouzmanov, K., Chiaradia, M., & Pokrovski, G.S. (2017). Sulfide minerals in hydrothermal deposits. Elements, 13(2), 97-103. https://doi.org/10.2113/gselements.13.2.97.

5. Lai, H., Deng, J., Fan, G., Xu, H., Chen, W., Li, S., & Huang, L. (2019). Mechanism study of Xanthate adsorption on sphalerite/marmatite surfaces by TOF-SIMS analysis and flotation. Minerals, 9(4), 205. https://doi.org/10.3390/min9040205.

6. Noirant, G., Benzaazoua, M., Kongolo, M., Bussire, B., & Frenette, K. (2019). Alternatives to Xanthate collectors for the desulphurization of ores and tailings: Pyrite surface chemistry. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 577, 333-346. https://doi.org/10.1016/j.colsurfa.2019.05.086.

7. Peltoniemi, M., Kallio, R., Tanhua, A., Luukkanen, S., & Permki, P. (2020). Mineralogical and Surface Chemical Characterization of Flotation Feed and Products after Wet and Dry Grinding.Minerals Engineering, 156, 106500. https://doi.org/10.1016/j.mineng.2020.106500.

8. Wei, Z., Wang, H., Xue, C., & Zeng, M. (2020). Selective depression of sphalerite by combined depressant K₃[Fe(CN)₆], ZnSO₄, and Na₂CO₃ in PbZn sulfide flotation separation. Chemical Papers, 74(2), 421-429. https://doi.org/10.1007/s11696-019-00884-w.

9. Ejtemaei, M., & Nguyen, A. V. (2017). Characterization of sphalerite and pyrite surfaces activated by copper sulphate. Minerals Engineering, 100, 223-232. https://doi.org/10.1016/j.mineng.2016.11.005.

10. Issaad, M., Boutaleb, A., & Kolli, O. (2017). Mine Waste at The Kherzet Youcef Mine: Environmental Characterization. EGUGA, 10069.

11. Nakache, R., Boukelloul, M. L., Bouhedja, A., & Fredj, M. (2019). Stability analysis of the pillars of the underground mine Chabet el-Hamra, Algeria by analytical and numerical methods. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2). https://doi.org/10.29202/nvngu/2019-2/1.

12. Bellouche, M. (2016). Schema hydrogeologique possible de la mine de Kherzet Youssef (Nord-Est Algerian). Sciences & Technologie. D, Sciences de la terre, 73-80.

13. Zhang, X., Han, Y., & Kawatra, S.K. (2020). Effects of grinding media on grinding products and flotation performance of sulfide ores. Mineral Processing and Extractive Metallurgy Review, 1-12. https://doi.org/10.1080/08827508.2019.1692831.

14. Bai, X., Wen, S., Liu, J., & Lin, Y. (2018). Response surface methodology for optimization of copper leaching from refractory flotation tailings. Minerals,8(4), 165. https://doi.org/10.3390/min8040165.

15. Wang, G., Nguyen, A.V., Mitra, S., Joshi, J.B., Jameson, G.J., & Evans, G.M. (2016). A review of the mechanisms and models of bubble-particle detachment in froth flotation. Separation and Purification Technology, 170, 155-172. https://doi.org/10.1016/j.seppur.2016.06.041.

16. Shengo, M. L., Kime, M. B., Mambwe, M. P., & Nyembo, T. K. (2019). A review of the beneficiation of copper-cobalt-bearing minerals in the Democratic Republic of Congo. Journal of Sustainable Mining, 18(4), 226-246. https://doi.org/10.1016/j.jsm.2019.08.001.

17. Bu, X., Xie, G., Peng, Y., Ge, L., & Ni, C. (2017). Kinetics of flotation Order of process, rate constant distribution and ultimate recovery. Physicochemical Problems of mineral processing, 53. https://doi.org/10.5277/ppmp170128.

18. Kaniki, A. T., & Tumba, K. (2019). Management of mineral processing tailings and metallurgical slags of the Congolese copper belt: Environmental stakes and perspectives. Journal of Cleaner Production, 210, 1406-1413. https://doi.org/10.1016/j.jclepro.2018.11.131.

• < Prev
• Next >