Development of a methodology for assessing the expediency of mine workings decommissioning based on the geomechanical factor
- Details
- Category: Content №4 2021
- Last Updated on 23 August 2021
- Published on 30 November -0001
- Hits: 5506
Authors:
I.A.Salieiev, LLC DTEK Energy, Kyiv, Ukraine
V.I.Bondarenko, orcid.org/0000-0001-7552-0236, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
H.A.Symanovych, orcid.org/0000-0002-2121-1742, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
I.A.Kovalevska, orcid.org/0000-0002-0841-7316, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (4): 010 - 016
https://doi.org/10.33271/nvngu/2021-4/010
Abstract:
Purpose. Substantiation of the methodology for predicting the state of mine workings based on the study on geomechanical processes when assessing the consequences of mine closure taking into account the entire period of their existence, during which the development of displacement with various intensity occurs in the surrounding coal-bearing mass.
Methodology. The study is based on methods of analysis and synthesis, methods of comparison, abstraction, analogy, calculation and construction. The methods of mine tool observations of the manifestations of rock pressure and their processing by methods of correlation and dispersion analysis for establishing the relationship of displacements of the mine working contour with geomechanical factors were used.
Findings. A possibility of stage-by-stage decommissioning of mine workings when grouping mining-and-geological conditions is substantiated. An example of calculating the displacements in a mine working during its decommissioning is presented. The given calculation expressions make it possible to assess the mine working state, taking into consideration the patterns of the geomechanical factor influence on making a technical decision on the expediency of its further operation.
Originality. The patterns of the rock pressure manifestation development in sequentially abandoned mine workings have been determined. Based on the methods of correlation-dispersion analysis, the dependence of the mine working contour displacements on geomechanical factors have been revealed throughout the entire period of its existence.
Practical value. A methodology for assessing the state of mine workings at the time of their decommissioning has been developed, which is an integral part of the recommendations to limit the negative influence of mine closure. The peculiarity of the methodology is in taking into account the entire period of mine workings existence, which leads to a well-grounded technical decision on the possibility of dismantling the metal structures with the complete exclusion of emergency situations.
Keywords: rock mass, displacements, life time, decommissioning of mine workings, geomechanical factor
References.
1.Word Coal. (2020). WCA comments on IEA Energy Technology Perspectives Report. Retrieved from https://www.worldcoal.com/coal/14092020/wca-comments-on-iea-energy-technology-perspectives-report/.
2.Ricketts, B. (2019). Eeurocoal. Changing the face of coal: an outline strategic research agenda for future coal-related RTD in the European Union. Retrieved from https://ec.europa.eu/energy/sites/ener/files/documents/12.1_euracoal.pdf.
3.Dubiski, J., Prusek, S., Turek, M., & Wachowicz, J. (2020). Hard Coal Production Competitiveness in Poland. Journal of Mining Science, (56), 322-330. https://doi.org/10.1134/S1062739120026806.
4.Grincheko, A.I., & Golovneva, H.E. (2019). Reusing underground mine space of closing mines. Topical Issues of Rational Use of Natural Resources, 615-621. https://doi.org/10.1201/9781003014638-20.
5.Galiyev, D.A., Uteshov, E.T., & Tekenova, A.T. (2020). Digitalization of technological and organizational processes of mining operations due to the implementation of the installation system and accounting the key indicators. News of the National Academy of Sciences of the Republic of Kazakhstan, 5(443), 47-53.
6.Bondarenko, V., Kovalevska, I., Symanovych, H., Poimanov, S., & Pochepov, V. (2020). Method for optimizing the protecting pillars parameters in underground coal mining. E3S Web of Conferences, (166), 02009. https://doi.org/10.1051/e3sconf/202016602009.
7.Bondarenko, V., Symanovych, H., Barabash, M., Husiev, O., & Salieiev, I. (2020). Determining patterns of the geomechanical factors influence on the fastening system loading in the preparatory mine workings. Mining of Mineral Deposits, 14(1), 44-50. https://doi.org/10.33271/mining14.01.044.
8.Malashkevych, D., Poimanov, S., Shypunov, S., & Yerisov, M. (2020). Comprehensive assessment of the mined coal quality and mining conditions in the Western Donbas mines. E3S Web of Conferences, (201), 01013. https://doi.org/10.1051/e3sconf/202020101013.
9.Lozynskyi, V., Medianyk, V., Saik, P., Rysbekov, K., & Demydov,M. (2020). Multivariate solutions for designing new levels of coal mines. Rudarsko-Geoloko-Naftni Zbornik, 35(2), 23-31. https://doi.org/10.17794/rgn.2020.2.3.
10.Petlovanyi, M., Malashkevych, D., Sai, K., & Zubko, S. (2020). Research into balance of rocks and underground cavities formation in the coal mine flowsheet when mining thin seams. Mining of Mineral Deposits, 14(4), 66-81. https://doi.org/10.33271/mining14.04.066.
11.Kuanyshbekovna, M.M., Krupnik, L., Koptileuovich, Y.K., Mukhtar,E., & Roza, A. (2016). The system is roof bolting-mountain. International Journal of Applied Engineering Research, 11(21), 10454-10457.
12.Fomychov,V., Mamaikin,O., Demchenko,Y., Prykhorchuk,O., & Jarosz,J. (2018). Analysis of the efficiency of geomechanical model of mine working based on computational and field studies. Mining of Mineral Deposits, 12(4), 46-55. https://doi.org/10.15407/mining12.04.046.
13.Annual reports of DTEK integrated annual reports of financial and non-financial results (2017). Retrieved from https://dtek.com/en/annual-report/.
14.Wills, B.A., & Finch, J.A. (2015). Mineral Processing Technology. Oxford: Butterworth-Heinemann. https://doi.org/10.1016/c2010-0-65478-2.
15.Dolzhikov, P., & Semiriagin, S. (2014). Investigations and technical decisions of the mining and ecological problems while closing coal mines. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 159-164. https://doi.org/10.1201/b17547-27.
16.Medianyk, V., & Cherniaiev, O. (2018). Technological aspects of technogenic disturbance liquidation in the areas of coal-gas deposits development. E3S Web of Conferences, (60), 00037. https://doi.org/10.1051/e3sconf/20186000037.
17. Kolesnyk, V., Kulikova, D., & Kovrov, S. (2013). In-stream settling tank for effective mine water clarification. Mining of Mineral Deposits, 285-290. https://doi.org/10.1201/b16354-52.
18. Svetkina, O., Netiaga, O., & Tarasova, H. (2015). Sorbents of purify mine waters. New Developments in Mining Engineering 2015, 111-115. https://doi.org/10.1201/b19901-21.
19.Ilyashov, M., Diedich, I., & Nazimko, V. (2019). Prospective tendencies of coal mining risk management. Mining of Mineral Deposits, 13(1), 111-117. https://doi.org/10.33271/mining13.01.111.
20.Bizyaev, A.A., Voronkina, N.M., Savchenko, A.V., & Tsupov,M.N. (2019). Methodology for the non-contact determination of dangerously loaded zones in a mine array. Ugol, (11), 27-31. https://doi.org/10.18796/0041-5790-2019-11-27-31.
21.Bondarenko, V., Kovalevska, I., Symanovych, G., Sotskov, V., & Barabash, M. (2018). Geomechanics of interference between the operation modes of mine working support elements at their loading. Mining Science, (25), 219-235. https://doi.org/10.5277/msc182515.
22.Bondarenko, V., Kovalevska, I., Husiev, O., Snihur, V., & Salieiev,I. (2019). Concept of workings reuse with application of resource-saving bolting systems. E3S Web of Conferences, (133), 02001. https://doi.org/10.1051/e3sconf/201913302001.
Newer news items:
- Analysis of stress in the conveyor belt (Maxwell–element model) - 23/08/2021 18:11
- Investigation of the effect of several parameters on the applicability of magnetic separation method - 23/08/2021 18:11
- Analytical and experimental assessment of screw centrifugal pump at improving its design - 23/08/2021 18:11
- Definition of rational operating modes of a vibratory jaw crusher - 23/08/2021 18:11
- Compound physical and mechanical effects stimulating metastable diamond formation - 23/08/2021 18:11
- Water resistance of structured sand-sodium-silicate mixtures - 23/08/2021 18:11
- Composition and processing of sulphide lead-zinc ores from Chaabet El-Hamra mine (Setif, Algeria) - 23/08/2021 18:11
- Automatic control of jet grinding on the basis of acoustic monitoring of mill operating zones - 23/08/2021 18:11
- Substantiating rational schedule to load trucks using draglines while mining a pit of Motronivskyi MPP - 23/08/2021 18:11
- New methods for preventing crumbling and collapse of the borehole walls - 23/08/2021 18:11