Науковий вісник НГУ

New methods for preventing crumbling and collapse of the borehole walls

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №4 2021

Last Updated on 23 August 2021

Published on 30 November -0001

Hits: 5623

Authors:

I.I.Chudyk, orcid.org/0000-0002-7402-6962, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Ya.M.Femiak, orcid.org/0000-0003-4445-6731, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

M.I.Orynchak, orcid.org/0000-0002-7523-830X, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.K.Sudakov, orcid.org/0000-0003-2881-2855, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.I.Riznychuk, orcid.org/0000-0003-3149-8393, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (4): 017 - 022

https://doi.org/10.33271/nvngu/2021-4/017

Abstract:

Purpose. To increase the stability of the wellbore during its construction in unstable rocks.

Methodology. To solve the set tasks, an integrated approach is used in the work, which includes critical analysis and generalization of scientific and technical achievements in combination with theoretical and experimental research.

Findings. Factors influencing the stability of the borehole walls in conditions prone to rock slides and rock falls are analyzed. Expediency of using baths for strengthening the walls of wells in deposits of clay rocks, including clay shales, has been established and substantiated. A formulation of a fuel-bituminous bath has been proposed, the installation of which in a well for 78 hours makes it possible to increase the initial compressive strength of rocks, which will ensure the integrity of the borehole walls. It is recommended to use corrugated casing pipes to cover the sections of the wellbore where there is intensive crumbling and collapse of rocks.

Originality. For the first time, the main factors of wall destruction have been established and a method has been developed to prevent the destruction of walls of directional wells composed of rocks prone to loss of stability under the action of drill string loads.

Practical value. To combat the collapse of the walls of the well composed of rocks, prone to loss of stability, the authors suggested setting up fuel-bituminous baths in the range of complications. In case when the collapse of the walls of the well can not be prevented with a fuel-bitumen bath, it is proposed to overlap the area of collapse with the casing using advanced corrugated casing pipes with the injection of adhesive into the rock mass in the near-wellbore zone. The use of an adhesive material increases the contact area of the metal shell with the rock, which collapses increasing the stability of the borehole walls.

Keywords: drilling, drilling fluids, bath, cavern, crumbling, collapse, corrugated casing

References.

1. Ivasiv, V., Yurych, A., Zabolotnyi, S., Yurych, L., Bui, V., & Ivasiv,O. (2020). Determining the influence of the condition of rockdestroying tools on the rock cutting force. Eastern-European Journal of Enterprise Technologies, 1(1-103), 15-20. https://doi.org/10.15587/1729-4061.2020.195355.

2. Yurych, L.R., Ivasiv, V.M., Rachkevych, R.V., Yurych, A.R., & Kozlov, A.A. (2016). The use of elastic elements for wellbore trajectory Management. Neftyanoe Khozyaystvo - Oil Industry, (2), 36-37.

3. Vytiaz,.Yu., Hrabovskyi,R.S., Tyrlych,V.V., & Artym,V.. (2018). Assessment of the impact of dynamic loads on the conditions of destruction of pipes of drill strings during round tripping operations. Scientific bulletin of IFNTUOG, 1(44),25-34.

4. Dutkiewicz,M., Gobiowska,I., Shatskyi,I., Shopa,V., & Velychkovych,A. (2018). Some aspects of design and application of inertial dampers. MATEC Web of Conferences, 178, 06010. https://doi.org/10.1051/matecconf/201817806010.

5. Velychkovych, A., Petryk, I., & Ropyak, L. (2020). Analytical study of operational properties of a plate shock absorber of a sucker-rod string. Shock and Vibration, 2020, article ID3292713. https://doi.org/10.1155/2020/3292713.

6. Ropyak, L.Ya., Pryhorovska, T.O., & Levchuk, K.H. (2020). Analysis of Materials and Modern Technologies for PDC Drill Bit Manufacturing. Progress in Physics of Metals, 21(2), 274-301. https://doi.org/10.15407/ufm.21.02.274.

7. Grydzhuk, J., Chudyk, I., Velychkovych, A., & Andrusyak, A. (2019). Analytical estimation of inertial properties of the curved rotating section in a drill string.Eastern-European Journal of Enterprise Technologies, 1(7-97), 6-14. https://doi.org/10.15587/1729-4061.2019.154827.

8. Shatskyi, I.P., Perepichka, V.V., & Ropyak, L.Y. (2020). On the influence of facing on strength of solids with surface defects. Metallofizika i Noveishie Tekhnologii, 42(1), 69-76. https://doi.org/10.15407/mfint.42.01.0069.

9. Pryhorovska, T., & Ropyak, L. (2019). Machining Error Influnce on Stress State of Conical Thread Joint Details. Proceedings of the International Conference on Advanced Optoelectronics and Lasers (CAOL), 9019544, 493-497. https://doi.org/10.1109/CAOL46282.2019.9019544.

10. Shatskyi, I., Ropyak, L., & Velychkovych, A. (2020). Model of contact interaction in threaded joint equipped with spring-loaded collet. Engineering Solid Mechanics, 8(4), 301-312. https://doi.org/10.5267/j.esm.2020.4.002.

11. Vytvytskyi,I.I., Seniushkovych,M.V., & Shatskyi,I.P. (2017). Calculation of distance between elastic-rigid centralizers of casing. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 28-35.

12. Shatskyi,I., Velychkovych,A., Vytvytskyi,I., & Seniushkovych,M. (2019). Analytical models of contact interaction of casing centralizers with well wall. Engineering Solid Mechanics, 7(4), 355-366. https://doi.org/10.5267/j.esm.2019.6.002.

13. Petlovanyi, M., Lozynskyi, V., Saik, P., & Sai, K. (2019). Predicting the producing well stability in the place of its curving at the underground coal seams gasification. E3S Web of Conferences, 123, 01019. https://doi.org/10.1051/e3sconf/201912301019.

14. Vytyaz, O.Y., Hrabovskyy, R.S., Artym, V.I., & Tyrlych, V.V. (2020). Effect of geometry of internal crack-like defects on assessing trouble-free operation of long-term operated pipes of drill string. Metallofizika i Noveishie Tekhnologii, 42(12), 1715-1527. https://doi.org/10.15407/mfint.42.12.1715.

15. Orynchak, M.., Riznychuk, A.., Orynchak, .., & Beizyk,.S. (2010). Fuel-bituminous bath. Exploration and development of oil and gas fields, 3(40), 90-95.

16. Chudyk, .., Femiak, Ya.., Riznychuk, .., Vasko, .S., & Yurych, L.R. (2019). Experimental studies of mechanical properties of rocks in thermobaric conditions. Exploration and development of oil and gas fields, 3(72), 32-41.

17. Sudakov, A., Chudyk, I., Sudakova, D., & Dziubyk, L. (2019). Innovative technology for insulating the borehole absorbing horizons with thermoplastic materials. E3S Web of Conferences, 123, 01033. https://doi.org/10.1051/e3sconf/201912301033.

18. Ashena, R., Elmgerbi, A., Rasouli, V., Ghalambor, A., Rabiei,M., & Bahrami, A. (2020). Severe wellbore instability in a complex lithology formation necessitating casing while drilling and continuous circulation system. Journal of Petroleum Exploration and Production Technology, 10, 1511-1532. https://doi.org/10.1007/s13202-020-00834-3.

19. Ayoub Darvishpour, Masoud Cheraghi Seifabad, David Anthony Wood, & Hamzeh Ghorbani (2019). Wellbore stability analysis to determine the safe mud weight window for sandstone layers. Petroleum Exploration and Development, 46(5), 1031-1038. https://doi.org/10.1016/S1876-3804(19)60260-0.

20. Samit Mondal, & Rima Chatterjee (2019). Quantitative risk assessment for Optimum Mud weight window design: A case study. Journal of Petroleum Science and Engineering, 176, 800-810. https://doi.org/10.1016/j.petrol.2019.01.101.

• < Prev
• Next >