Impact of power electronics devices on leakage current in mine electrical systems: a case study in Vietnam
- Details
- Category: Content №1 2025
- Last Updated on 25 February 2025
- Published on 30 November -0001
- Hits: 58
Authors:
Do Nhu Y, orcid.org/0000-0001-6395-2875, Hanoi University of Mining and Geology, Hanoi, the Socialist Republic of Vietnam
Nguyen Truong Giang, orcid.org/0009-0007-4900-5418, Hanoi University of Mining and Geology, Hanoi, the Socialist Republic of Vietnam
Ngo Xuan Cuong, orcid.org/0000-0002-0571-2168, School of Engineering and Technology, Hue University, Thua Thien Hue, the Socialist Republic of Vietnam
Nguyen Thac Khanh*, orcid.org/0009-0004-3122-9884, Hanoi University of Mining and Geology, Hanoi, the Socialist Republic of Vietnam, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Le Anh Tuan, orcid.org/0009-0001-8695-7457, Hanoi University of Industry, Hanoi, the Socialist Republic of Vietnam
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2025, (1): 055 - 062
https://doi.org/10.33271/nvngu/2025-1/055
Abstract:
Purpose. To determine the impact of power electronic devices on leakage current in underground mine AC power network. The research results allow choosing appropriate leakage protection method to improve electrical safety in underground mining.
Methodology. This study uses analytical methods and modeling methods on Matlab/Simulink software to determine, analyze, and evaluate the working current and leakage current in the mine power network containing power electronic devices.
Findings. A mine power network model containing inverter and electric motor was built by analytical method and simulated using Matlab/Simulink with model parameters U = 1,140 V, C = 0.19 uF/phase, R = 168 kΩ/phase. The research results show that, with a leakage resistance of 1 k, the leakage current value in the AC network with a frequency other than 50 Hz after the inverter (467 mA) is 1.52 times higher than the leakage current value in the AC network with a frequency of 50 Hz before the inverter (307 mA), and at the same time, many high-order harmonic components appear in the 50 Hz AC network with THD = 1.77. In addition, the research results also show that the leakage current in the AC network before and after the inverter depends less on the insulation resistance of the DC network but depends mainly on the insulation of the AC network, the leakage resistance and the operating frequency of the AC network.
Originality. Leakage current in AC power network containing power electronic devices in mining in Vietnam is studied. The research results show that when using a mine power network with an inverter, the leakage current on the AC side after the inverter has a larger value than the leakage current of the AC side before the inverter.
Practical value. The research results allow choosing the appropriate leakage protection method to improve electrical safety in underground mining.
Keywords: electrical safety, power electronic devices, leakage current, underground mining
References.
1. Zhao, J., Liang, J., Liu, Y., Liu, P., & Zhao, B. (2016). Selective leakage protection of coal mine distribution network with additional DC source. IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC), 248-252. https://doi.org/10.1109/IMCEC.2016.7867210.
2. Salami, O. B., Xu, G., Kumar, A. R., & Pushparaj, R. I. (2023). Underground mining fire hazards and the optimization of emergency evacuation strategies (EES): The issues, existing methodology and limitations, and way forward. Process Safety Environmental Protection, (177), 617-634. https://doi.org/10.1016/j.psep.2023.07.012.
3. Nguyen, K. T., Kim, L. N., Nguyen, S. T., & Nguyen, G. T. (2020). Research, design, manufacture leakage current protection device for 660 V/1140 V underground mine electrical networks. Journal of Mining Earth Sciences, 61(5), 96-103. https://doi.org/10.46326/JMES.2020.61(5).11.
4. Dtm-vn (2024). Thiet-bi-ro-bao-ve. 10/8/2024. Retrieved from https://dtm-vn.com/danh-muc/thiet-bi-ro-bao-ve.html.
5. Wang, X., & Blaabjerg, F. (2018). Harmonic stability in power electronic-based power systems: Concept, modeling, and analysis. IEEE Transactions on Smart Grid, 10(3), 2858-2870. https://doi.org/10.1109/TSG.2018.2812712.
6. Nguyen, T. G., Nguyen, T. K., Ngo, X. C., & Do, N. Y. (2023). Research on Electric Leakage Protection to Improve Electrical Safety in Underground Mining in Vietnam. Inżynieria Mineralna, (2), 209-214. http://doi.org/10.29227/IM-2023-02-32.
7. Giang, N. T., Nhu, D. Y., Khanh, N. T., & Cuong, N. X. (2023). Study of leakage current in underground mine power network: a case study in mining in Vietnam. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 86-92. https://doi.org/10.33271/nvngu/2023-6/086.
8. Gaafar, M. A., Orabi, M., Ibrahim, A., Kennel, R., & Abdelrahem, M. (2021). Common-ground photovoltaic inverters for leakage current mitigation: Comparative review. Applied Sciences, 11(23), 11266. https://doi.org/10.3390/app112311266.
9. Slangen, T., Lustenhouwer, B., Cuk, V., & Cobben, J. (2021). The effects of high-frequency residual currents on the operation of residual current devices. Renewable Energy Power Quality Journal, (19), 67-72. https://doi.org/10.24084/repqj19.216.
10. Czaja, P. (2016). Anti-shock safety of industrial electric installations with built-in frequency converters. Progress in Applied Electrical Engineering (PAEE), 1-5. https://doi.org/10.1109/PAEE.2016.7605113.
11. Ngo, X. C., & Do, N. Y. (2021). Influence of Harmonics on the Working Efficiency of a 6/1.2 kV Transformer in a Pit Mine. Inżynieria Mineralna, (2), 149-156. http://doi.org/10.29227/IM-2021-02-12.
12. Ngo, X. C., Do, N. Y., & Tran, Q. H. (2020). The Influence of Voltage Quality on Asynchronous Motor Performance of EKG Excavator in Open Pit Mines-Vinacomin. Inżynieria Mineralna, 1(2), 139-145. http://doi.org/10.29227/IM-2020-02-18.
13. Marek, A. (2010). Zabezpieczenia upływowe w sieciach z przemiennikami częstotliwości w podziemiach kopalń. Mechanizacja i Automatyzacja Górnictwa, 468(2), 30-35. Retrieved from https://bibliotekanauki.pl/articles/186888.
14. Wymann, T., Pollock, M., & Rees, J. (2015). A new approach to mining earth leakage protection with medium voltage drives. Industrial-Electrix.
15. Marek, A. (2017). Influence of indirect frequency converters on operation of central leakage protection in underground coalmine networks. Mining-Informatics, Automation Electrical Engineering, 55(3), 9-14. http://doi.org/10.7494/miag.2017.3.531.9.
16. Vasylets, S., & Vasylets, K. (2019). Mathematical Modeling of Current Leakage in the Combined Power Network of a Mine. Modeling, Control and Information Technologies: Proceedings of International scientific and practical conference, 177-178. http://doi.org/10.31713/MCIT.2019.06.
17. Vasylets, S., & Vasylets, K. (2019). Refinement of the mathematical model of frequency converter cable branch with a single-phase short circuit. Eastern-European Journal of Enterprise Technologies, 4(9), 27-35. https://doi.org/10.15587/1729-4061.2019.176571.
18. Liu, Z., Yu, H., & Jin, W. (2023). Adaptive Leakage Protection for Low-Voltage Distribution Systems Based on SSA-BP Neural Network. Applied Sciences, 13(16), 9273. https://doi.org/10.3390/app13169273.
19. Ualikhan, I., & Josif, B. (2015). Development of control algorithm for adaptive leakage current protection devices’ using Fuzzy logic. Procedia Engineering, (100), 666-671. https://doi.org/10.1016/j.proeng.2015.01.418.
20. Lia, Z. K., & Wang, L. J. (2023). Study on Selective Insulation On-line Monitoring Technology for Mine Power Network. E3S Web of Conferences, (369), 02003. https://doi.org/10.1051/e3sconf/202336902003.
21. Cocina, V., Colella, P., Pons, E., Tommasini, R., & Palamara, F. (2016). Indirect contacts protection for multi-frequency currents ground faults. IEEE International Conference on Environment and Electrical Engineering (EEEIC), 1-5. https://doi.org/10.1109/EEEIC.2016.7555701.
22. Liang, Y. L. (2012). New Idea of the Multilevel Leakage Protection in Underground LV Distribution Networks. Advanced Materials Research, (383), 1481-1487. https://doi.org/10.4028/www.scientific.net/AMR.383-390.1481.
23. Do Nhu, Y., & Cuong, N. X. (2022). Impact of Voltage Unbalance and Harmonics on Induction Motor in Operation Mode. Advances in Engineering Research and Application, 468-478. Springer. https://doi.org/10.1007/978-3-030-92574-1_49.
24. Do, N. Y., & Ngo, X. C. (2022). Effect of harmonic components and load carrying factor on the operating mode of induction motor. AIP Conference Proceedings, 2534(1). https://doi.org/10.1063/5.0105148.
Newer news items:
- Innovations in the defense-industrial complex: current status and development prospects - 25/02/2025 12:56
- Commercialization of NTU “KhPI” innovations with digital marketing tools in the experience economy - 25/02/2025 12:56
- Systems engineering design and development of universal die set for hydraulic presses - 25/02/2025 12:56
- FoSDeT: a new hybrid machine learning model for accurate and fast detection of IoT botnet - 25/02/2025 12:56
- Technology for determining weight coefficients of components of information security - 25/02/2025 12:56
- Research on the effectiveness of using LSTM architecture in modeling the cognitive process of recognition - 25/02/2025 12:56
- Automatic compensation of the mill roll eccentricity in terms of limited speed of hydraulic compression devices - 25/02/2025 12:56
- Environmental factors for land use restrictions establishment in Ukraine - 25/02/2025 12:56
- Study of the effectiveness of extinguishing model fires of coniferous and deciduous wood - 25/02/2025 12:56
- Environmental safety assessment of soils in Khmelnytskyi region based on chemical composition and acidity analysis - 25/02/2025 12:56
Older news items:
- Static continuous bulk material model for inclined bunker section - 25/02/2025 12:56
- Assessing criteria for casting and deformation suitability of metals and alloys - 25/02/2025 12:56
- Transformation of the kirigami-type deformable inlay during roll bonding - 25/02/2025 12:56
- Feasibility assessment of low-grade iron ore from El Ouenza mine by high-intensity magnetic separation - 25/02/2025 12:56
- Well operation by plunger rod pumps in difficult conditions - 25/02/2025 12:56
- Predicting the geofiltration processes within the closed quarry zone in difficult technogenically disturbed conditions - 25/02/2025 12:56
- Improved techniques for exploration of groundwater deposits for conditions of rural areas of the Mangystau Peninsula - 25/02/2025 12:56