Науковий вісник НГУ

The method for determining the parameters of the diagrams of a truncated-wedge destruction of cylindrical samples of rocks

• 
• 

User Rating:  / 1

PoorBest 

Details

Category: Content №1 2021

Last Updated on 05 March 2021

Published on 30 November -0001

Hits: 2800

Authors:

L.M.Vasyliev, orcid.org/0000-0002-8146-0812, Institute of Geotechnical Mechanics named by N.Poljakov of National Academy of Sciences of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

D.L.Vasyliev, orcid.org/0000-0001-6864-357X, Institute of Geotechnical Mechanics named by N.Poljakov of National Academy of Sciences of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.Ye.Nazarov, orcid.org/0000-0002-5271-3622, Institute of Geotechnical Mechanics named by N.Poljakov of National Academy of Sciences of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

M.G.Malich, orcid.org/0000-0003-4967-5378, National Metallurgical Academy of Ukraine, Dnipro, Ukraine, e-mail: n22051957m@gmail. com

V.O.Katan, orchid.org/0000-0001-9167-2619, Oles Honchar Dnipro National University, Dnipro, Ukraine, e-mail: vlad_aleks@ i.ua

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (1): 047 - 052

https://doi.org/10.33271/nvngu/2021-1/047

Abstract:

Purpose. Development of an analytical method for calculating the parameters of complete diagrams longitudinal tension deformation for the truncated-wedge shape of destruction of cylindrical rock samples to control the stress-strain state of the rock mass and effective destruction of these materials during disintegration.

Methodology. Analytically, by developing a mathematical model of the fracture process of cylindrical rock samples with their truncated-wedge form of crack development, an algorithm is created for calculating the full deformation diagram from the acting tension using the experimental values of four indicators of material properties the shear resistance limit, internal and external friction coefficients and elastic modulus. The method is based on the improved Coulomb strength criterion, supplemented by the parameters of contact friction and allowing one, using the theory of slip lines, to calculate the limiting state of the material at the tip of cracks developing from the edges of the sample of the correct geometry, taking into account the release of part of the material from the load and compliance with Hookes law deformation of the sample bearing area and the specific force on it.

Findings. The method of mathematical modeling makes it possible to determine the ultimate strength and residual strength of cylindrical rock samples using four property indicators that can be experimentally established by simple methods.

Originality. For the first time, analytical modeling of the process of destruction of cylindrical rock samples with their truncated-wedge form of destruction was carried out, taking into account the internal contact friction depending on the properties of the rock material and external contact friction.

Practical value. The proposed method of mathematical modeling and the calculation algorithm make it possible to determine the limit and residual strength of rock samples using four property indicators, which can be established experimentally by simple methods under laboratory conditions of enterprises of the mining and metallurgical complex. The calculation results can be quickly used to control the state of the rock mass and effective destruction upon disintegration.

Keywords: mathematical modeling, rock; tensile strength, destruction, crack, complete tension-strain diagram

References.

1. Nesmashnyi, Y.A., & Bolotnikov, A.V. (2017). Determination of rock strength using modern equipment on the example of the Bolshaya Glivatka deposit. Metallurgicheskaya i gornorudnaya promyshlennost, 3, 82-87.

2. Tarasov, B., & Potvin, Y. (2013). Universal criteria for rock brittleness estimation under triaxial. International Journal of Rock Mechanics and Mining Sciences, 59, 57-69. https://doi.org/10.1016/j.ijrmms.2012.12.011.

3. Manouchehrian, A., & Cai, M. (2016). Simulation of unstable rock failure under unloading conditions. Canadian Geotechnical Journal, 53, 22-34. https://doi.org/10.1139/cgj-2015-0126.

4. Zhao, G., & Cai, M. (2015). Influence of specimen height-to-width ratio on the strainburst characteristics of Tianhu granite under true-triaxial unloading conditions. Canadian Geotechnical Journal, 5, 890-902. https://doi.org/10.1139/cgj-2014-0355.

5. Er. Kamaljit Kaur, & Dr. Vishwas Sawant (2016). Comparison of rock samples from two different states. International Journal of Recent Research Aspects, 3, 25-28.

6. Bingxiang, H., & Jiangwei, L. (2013). The effect of loading rate on the behavior of samples composed of coal and rock. International Journal of Rock Mechanics and Mining Sciences, 61, 23-30. https://doi.org/10.1016/j.ijrmms.2013.02.002.

7. Feiying Ma, YongqingWang, HaitaoLi, LinWang, HuiWang, & RuiJiang (2014). Staged Coalbed Methane Desorption and the Contribution of Each Stage to Productivity. Chemistry and Technology of Fuels and Oils, 50(4), 344-353.

8. Lokshina, L.Ya., & Kostandov, Yu.A. (2014). Calculation of the limiting state of a rock sample under uniaxial compression with rigid stamps. Deformirovaniye i razrusheniye materialov s defektami i dinamicheskiye yavleniya v gornykh porodakh i vyrabotkakh, 108-112.

9. Trofimov, V.A., & Filippov, Yu.A. (2015). Deformation and destruction of materials with defects and dynamic phenomena in rocks and mining. Deformirovaniye i razrusheniye obraztsa gornoy porody, 192-198.

10. Kostandov, Yu.A., & Lokshina, L.Ya. (2015). Calculation of position of boundaries of full contact and slippage at compression of the samples of brittle materials. Deformirovaniye i razrusheniye materialov s defektami i dinamicheskiye yavleniya v gornykh porodakh i vyrabotkakh, 74-78.

11. Vasyliev, L.M., Vasyliev, D.L., & Usov, O.A. (2013). Analytical construction of stress-strain diagrams of rock samples with their truncated-wedge fracture. Metallurgicheskaya i gornorudnaya promyshlennost, 6, 81-84.

12. Vasyliev, L.M., Vasyliev, D.L., Malich, N.G., & Angelovskiy, A.A. (2018). Mechanics of formation of forms of destruction of rock specimens during their compression: monograph. Dnipro: IMA-press.

• < Prev
• Next >