Науковий вісник НГУ

Analysis of numeric results for analogue of Galin’s problem in curvilinear coordinates

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №1 2023

Last Updated on 25 February 2023

Published on 30 November -0001

Hits: 3331

Authors:

A.H.Shporta*, orcid.org/0000-0002-1260-7358, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

T.S.Kagadii, orcid.org/0000-0001-6116-4971, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.B.Govorukha, orcid.org/0000-0002-0936-9272, Dnipro State Agrarian and Economic University, Dnipro, Ukraine,  e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.D.Onopriienko, orcid.org/0000-0002-3127-4616, Dnipro State Agrarian and Economic University, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Shuo Zhao, orcid.org/0000-0002-7216-4317, Hebei University of Science and Technology, School of Mechanical Engineering, Shijiazhuang, the People’s Republic of China, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (1): 142 - 148

https://doi.org/10.33271/nvngu/2023-1/142

Abstract:

Purpose. Studying the results obtained when applying the perturbation method to the individual contact problems solution. Considering the influence of non-ideal material properties of interaction bodies. Considering the contact area’s complex geometry influence.

Methodology. Mathematical models of the interaction of an elastic plate with cylindrical anisotropy in the form of a curvilinear sector problems have been constructed and considered. In the process of interaction between the stamp and the plate, areas of slippage and adhesion occur. The original complex problems of the theory of elasticity in the process of applying the perturbation method are reduced to the sequential solution of the potential theory problems.

Findings. An analytical solution to the interaction of an elastic anisotropic plate in the form of a curvilinear sector and a rigid stamp problem was obtained considering the existence of slippage and adhesion areas in the contact area. Laws of stress distribution under the stamp were found, as well as dependence of this distribution on the dimensions of the contact area.

Originality. The perturbation method is convenient and expedient to use when solving mining mechanics problems.

The study on the stress-strain state of an elastic anisotropic plate for the analogue of Galin’s problem was carried out, and the corresponding analytical solutions were obtained. The dependence of the coupling area size on the dimensions of the stamp and the opening angle of the sector, physical properties of the material is analyzed. Possible boundary transitions have been completed.

Practical value. The proposed approach makes it possible to obtain analytical solutions to practically important problems in mining, to evaluate the stress-strain state of thick-walled structures with reinforcing elements, stamps, overlays. The results can be useful when designing mine workings.

Keywords: stress distribution, adhesion, anisotropy, sliding, curvilinear sector, asymptotic method

References.

1. Campbell, J. E., Thompson, R. P., Dean, J., & Clyne, T. W. (2018). Experimental and computational issues for automated extraction of plasticity parameters from spherical indentation. Mechanics of Materials, 124, 118-131. https://doi.org/10.1016/j.mechmat.2018.06.004.

2. Ulitko, A. F., & Ostryk, V. I. (2015). Frictional contact of a rigid cone with an elastic half-space. Matematychni metody ta fizyko-mekhanichni polia, 55(4), 106-116.

3. Antipov, Y. A., & Mkhitaryan, S. M. (2017). A crack induced by a thin rigid inclusion partly debonded from the matrix. The Quarterly Journal of Mechanics and Applied Mathematics, 70(2), 153-185.

4. Slobodyan, B. S., Lyashenko, B. A., Malanchuk, N. I., Mar­chuk, V. E., & Martynyak, R. M. (2016). Modeling of contact interaction of periodically textured bodies with regard for frictional slip. Journal of Mathematical Sciences, 215(1), 110-120. https://doi.org/10.1007/s10958-016-2826-x.

5. Kuzmenko, V. I., & Plashenko, S. O. (2017). Related tasks of contact interaction. Matematychni metody ta fizyko-mekhanichni polia, 60(2), 75-84.

6. Vaisfeld, N. D., Popov, H. Ya., & Reut, A. V. (2015). An axisymmetric stress state problem of a doubly truncated cone. Matematychni metody ta fizyko-mekhanichni polia, 56(1), 185-196.

7. Vaisfeld, N. D., Reut, A. V., Vaisfeld, N., & Reut, A. V. (2012). Axisymmetric problem of the theory of elasticity for a circular cone with a point taking into account its own weight. Vestnyk Odesskoho unyversyteta, 17(3), 99-107.

8. Homeniuk, S., & Spytsia, O. (2018). Analytical and numerical approaches to solving problems of the theory of elasticity for multilayered media: monograph. Kherson: Vydavnychii dim “Helvetyka”. ISBN: 978-966-916-713-2.

9. Nykolaiev, A. H., & Tanchyk, E. A. (2014). Elastic mechanics of multicomponent bodies: monograph. Nats. aerokosmych. un-t ym. NE Zhukovskoho, Kharkovskyi Aviatsyonnyi Institut. ISBN: 978-613-4-93597-5.

10. Nykolaiev, A. H., & Tanchyk, E. A. (2015). Raspredelenye napriazhenyi v oblasty chetyrekh szhatykh sferoydalnykh vkliuchenyi v upruhom prostranstve. Visnyk Zaporizkoho Natsionalnoho Universytetu. Fizyko-Matematychni Nauky, (3), 189-198.

11. Sdvyzhkova, О., Golovko, Y., Dubytska, M., & Klimenko, D. (2016). Studying a crack initiation in terms of elastic oscillations in stress strain rock mass. Mining of mineral deposits, 10(2), 72-77. https://doi.org/10.15407/mining10.02.072.

12. Sdvyzhkova, O., Dmytro, B., Moldabayev, S., Rysbekov, K., & Sa­rybayev, M. (2020). Mathematical modeling a stochastic variation of rock properties at an excavation design. International Multidisciplinary Scientific GeoConference: SGEM, 20(1.2), 165-172. https://doi.org/10.5593/sgem2020/1.2/s03.021.

13. Sdvyzhkova, O., Gapeiev, S., & Tykhonenko, V. (2015). Stochastic model of rock mass strength in terms of random distance between joints. New Developments in Mining Engineering, 299, 303. https://doi.org/10.1201/b19901-53.

14. Sdvyzhkova, O., Babets, D., Kravchenko, K., & Smirnov, A. V. (2015). Rock state assessment at initial stage of longwall mining in terms of poor rocks of Western Donbass. New Developments in Mining Engineering: Theoretical and Practical Solutions of Mineral Resources Mining, 65-70. https://doi.org/10.1201/b19901-13.

15. Kagadiy, T. S., Shporta, A. H., Bilova, О. V., & Scherbina, I. V. (2020). Stressed-strained state of a layered basic with a fastening element. Applied Questions of Mathematical Modeling, 3(2.1).

https://doi.org/10.32782/kntu2618-0340/2020.3.2-1.10.

16. Belova, O. V. (2013). Perturbation method in application to mechanical problems. Zbirnyk naukovykh prats Natsionalnoho Hirnychoho Universytetu, (41), 113-120.

17. Shcherbyna, Y. V., Belova, O. V., & Kahadyi, T. S. (2017). Application of the asymptotic method to the solution of the load transfer problem for bodies of finite sizes. Vestnyk Khersonskoho Natsyonalnoho Tekhnycheskoho Universyteta, 2(3(62)), 240-244. ISSN 2078-4481.

18. Shporta, A. H. (2019). Contact interaction of stringer and orthotropic plate with curvilinear anisotropy. Problemy obchysliuvalnoi mekhaniky i mitsnosti konstruktsii, (30), 185-194. https://doi.org/10.15421/4219037.

• < Prev
• Next >