Improvement of oil field development using enhanced oil recovery methods
/ 0
- Details
- Category: Content №6 2021
- Last Updated on 29 December 2021
- Published on 30 November -0001
- Hits: 5101
Authors:
G.Moldabayeva, orcid.org/0000-0001-7331-1633, Satbayev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
R.Suleimenova, orcid.org/0000-0001-7995-5560, Satbayev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
N.Buktukov, orcid.org/0000-0001-6370-8557, D.A.Kunayev Mining Institute, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.Mergenov, orcid.org/0000-0001-7418-6993, Southern Alberta Institute of Technology, Calgary, Canada, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (6): 023 - 028
https://doi.org/10.33271/nvngu/2021-6/023
Abstract:
Purpose. To develop a technology to increase the oil recovery of formations using injection of polymer compositions.
Methodology. For this study, practical methods were used such as enhanced oil recovery using stimulating technologies, technology using polymer systems based on a water-soluble polymer acrylamide, and emulsion-polymer technology. To achieve the conformance control, which was a prerequisite for testing, a thorough selection of wells was carried out, as well as an analysis of their hydrodynamic connection.
Findings. As a result of using the method for limiting water inflows in the development of oil-bearing formations, redistribution of filtration channels, and a decrease in the production of fossil water as well as stabilisation of water cut were achieved.
Originality. The scientific novelty of the study is the withdrawal of wells that are able to redistribute the volume of water injection at perforation intervals. Increased sweep efficiency and pressure at the wellhead at the beginning and at the end of the conformance control indicate a decrease in the conductivity of high-permeability formation intervals.
Practical value. Application of the proposed technology for limiting water inflows will make it possible to develop low-permeability interlayers with filtration flows. The wells brought to a stable production rate during the study will ensure a decrease in formation water production and the water cut of the produced products, as well as stabilisation of the water cut over a certain period.
Keywords: reservoir, production well, water injection well, formation water, oil deposits
References.
1. International Energy Agency (2019). World Energy Outlook 2019 report. Retrieved from: https://www.iea.org/reports/world-energy-outlook-2019.
2. Le Billon, Ph., & Kristoffersen, B. (2020). Just cuts for fossil fuels? Supply-side carbon constraints and energy transition. Environment and Planning A: Economy and Space, 52(6), 1072-1092. https://doi.org/10.1177/0308518X18816702.
3. Kukhtin, P., & Znamenskaya, E. (2019). New challenges for the development of the oil market. E3S Web of Conferences, 135, 04060. https://doi.org/10.1051/e3sconf/201913504060.
4. Akchiche, M., Beauquin, J-L., Serra, S., & Sochard, S. (2020). Exergoeconomic Optimization of Oil and Gas Production Systems. In: SPE Europec Featured at 82nd EAGE Conference and Exhibition, (pp.1-15). https://doi.org/10.2118/200607-MS.
5. Altunina, L.K., Kuvshinov, V.A., & Kuvshinov, I.V. (2019). Enhanced oil recovery technologies for Arctic and Siberian regions. IOP Conference Series: Materials Science and Engineering, 696(1), 1-7. https://doi.org/10.1088/1757-899X/696/1/012001.
6. Das, A., Nguyen, N., & Nguyen, Q.P. (2020). Low-tension gas flooding for secondary oil recovery in low-permeability, high-salinity reservoirs. Fuel, 264, 116601. https://doi.org/10.1007/s12182-020-00455-9.
7. Panda, A., Pati, A.R, Saha, B., Kumar, A., & Mohapatra,S.S. (2019). The role of viscous and capillary forces in the prediction of critical conditions defining super-hydrophobic and hydrophilic characteristics. Chemical Engineering Science, 207, 527-54. https://doi.org/10.1016/j.ces.2019.06.013.
8. Drexler, S., Correia, E.L., Jerdy, A.C., Cavadas, L.A., & Couto, P. (2020). Effect of CO2 on the dynamic and equilibrium interfacial tension between crude oil and formation brine for a deepwater Pre-salt field. Journal of Petroleum Science and Engineering, 190, 107095. https://doi.org/10.1016/j.petrol.2020.107095.
9. Bahraminejad, H., Manshad, A.K., Ali, J.A., & Riazi,M. (2019). CuO/TiO2/PAM as a novel introduced hybrid agent for water oil interfacial tension and wettability optimization in chemical enhanced oil recovery. Energy & Fuels, 33(11), 10547-10560. https://doi.org/10.1021/acs.energyfuels.9b02109.
10. Guo, K., Hailong, L., & Zhixin, Yu. (2016). In-situ heavy and extra-heavy oil recovery: A review. Fuel, 185, 886-902. https://doi.org/10.1016/j.fuel.2016.08.047.
11. Gmez-Jaimes, F.N., Blanco-Tirado, C., & Combariza,M.Y. (2020). Amidated cellulose nanofibrils as demulsifying agents for a natural water-in-heavy-crude-oil emulsion. Energy & Fuels, 34(11), 14012-14022. https://doi.org/10.1021/acs.energyfuels.0c02790.
12. Javaheri, A., Habibi, A., Hassan, D., & Wood, J.M. (2018). Imbibition oil recovery from tight rocks with dual-wettability behavior. Journal of Petroleum Science and Engineering, 167, 180-191. https://doi.org/10.2118/185076-MS.
13. Yong, L., Song, B., Baozhu, L., Changbing, T., Yixiang, Z., & Quihao, Q. (2017). Representative sector modeling and key factors impact on waterflooding performance of a large multi-layered sandstone reservoir. In: SPE Europec Featured at 79th EAGE Conference and Exhibition. Society of Petroleum Engineers, (2014), (pp. 1378-1392). https://doi.org/10.2118/185856-MS.
14. Konwar, L., Aiowainati, E., Nemmavi, N., Michael, D., & Ali, A. (2020). Understanding mauddud waterflood performance in a heterogeneous carbonate reservoir with surveillance data and ensemble of analytical tools. In: Abu Dhabi International Petroleum Exhibition & Conference. Society of Petroleum Engineers, (2020), (165204). https://doi.org/10.2118/202798-MS.
15. Song, X., & Yong, L.I. (2018). Optimum development options and strategies for water injection development of carbonate reservoirs in the Middle East. Petroleum Exploration and Development, 45(4), 723-734. https://doi.org/10.1016/S1876-3804(18)30075-2.
16. Kairbayeva, A., Vasilenko, V., Dzhinguilbayev, S., Baibolova, L., & Frolova, L. (2018). Development of the mathematical model for the process of oil raw materials pressing. International Journal of Engineering and Technology (UAE), 7, 145-149. https://doi.org/10.36478/jeasci.2017.7836.7842.
17. Ciolkosz, D., Kukharets, S., & Tripath, J. (2020). Torrefied biomass in biofuel production system. Scientific Horizons, 8(93), 9-12. https://doi.org/10.33249/2663-2144-2020-93-8-9-12.
18. Kartskhiya, A.A., Tyrtychnyy, S.A., Smirnov, M.G., & Dolgikh,M.G. (2021). Formation of the Russian oil industry in the 19th century: Historical experience and modern assessments. Bylye Gody, 58(4), 2471-2484. https://doi.org/10.13187/BG.2020.4.2471.
19. Yang, H., Iqbal, M.W., & Lashari, Z. (2019). Experimental research on amphiphilic polymer/organic chromium gel for high salinity reservoirs. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 582, 123900. https://doi.org/10.1016/j.colsurfa.2019.123900.
20. Sun, C., Guo, H., Li, Y., & Song, K. (2020). Recent advances of surfactant-polymer (SP) flooding enhanced oil recovery field tests in China. Geofluids, 4, 1-16. https://doi.org/10.1155/2020/8286706.
Newer news items:
- New approach to injection of pressurizing gas into fuel tanks of power units - 29/12/2021 01:25
- Variation coefficient of torsional vibrations of the connection nodes of vibrating machines - 29/12/2021 01:25
- Ways to reduce hydraulic losses in multistage centrifugal pumping equipment for mining and oil-producing industries - 29/12/2021 01:25
- Improving the capacity of mine degassing pipelines - 29/12/2021 01:25
- Sand-sodium-silicate mixtures structured in steam-microwave environment effective values of thermo-physical properties - 29/12/2021 01:25
- Co-firing of gas coal dust fine particles and synthetic peat gas. Part 1. Simulation of processes of steam-air gasification of peat in a fixed bed and combustion of dust and gas mix in a stream - 29/12/2021 01:25
- Formation of converging cylindrical detonation front - 29/12/2021 01:25
- Assessing the quality of drilling-and-blasting operations at the open pit limiting contour - 29/12/2021 01:25
- Simulation of amber extraction processes from sandy and clay rocks with stope filling - 29/12/2021 01:25
- Numerical simulation of the open pit stability based on probabilistic approach - 29/12/2021 01:25
Older news items:
- Effect of geological and technological parameters on the convergence in a stope - 29/12/2021 01:25
- Petrographical and microfacies study of Sinjar formation in Bazyan anticline, Sulaimaniyah region (Northern Iraq) - 29/12/2021 01:25
- Forecast changes in the geodynamic regime of geological environment during large-scale subsoil development - 29/12/2021 01:25
Archive