Formation of converging cylindrical detonation front
- Details
- Category: Content №6 2021
- Last Updated on 29 December 2021
- Published on 30 November -0001
- Hits: 4988
Authors:
V.V.Sobolev, orcid.org/0000-0003-1351-6674, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.V.Skobenko, orcid.org/0000-0003-4606-4889, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
I.I.Usyk, orcid.org/0000-0003-0824-5099, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.V.Kulivar, orcid.org/0000-0002-7817-9878, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.V.Kurliak, orcid.org/0000-0002-9928-0406, Research-Industrial Complex Pavlohrad Chemical Plant, Pavlohrad, Dniproperovsk Region, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (6): 049 - 056
https://doi.org/10.33271/nvngu/2021-6/049
Abstract:
Purpose. To develop a laser method for initiating a converging cylindrical front of a detonation wave and a method for calculating the kinematic parameters of the cylindrical shell walls, accelerated by the pressure of the detonation products of an external explosive charge.
Methodology. An experimental technology for the manufacture of a photosensitive explosive composite and an experimental technique for igniting the surface of its layer with an extended laser beam without the use of a fiber-optic cable are used. The results of simulation modeling the Monte Carlo method were used to study the effect of illumination on the process of ignition of explosives by laser pulsed radiation. For the selected type of photosensitive explosive composite, its explosive and optical characteristics, the distance from the surface of the explosive charge to the lens scattering the laser beam, and taking into account the total area of the expanded beam, the regularities of the distribution of the radiation energy density over the vertical and horizontal sections of the laser beam were studied.
Findings. The analysis of the scientific and technical level of methods of shock-wave processing of materials in the region of ultrahigh pressures from the point of view of the fundamental value of the cumulation of energy in the waves of a converging cylindrical detonation and shock front is carried out. Physicomathematical modeling was carried out and the regularities of pressure increase in the wave front were established in the process of approaching the shell walls to the axis. The scientific results of modeling converging cylindrical shells under the influence of the pressure of the explosion products have been analyzed. A method for laser initiation of a converging cylindrical front of a detonation wave has been developed, and a method for calculating the kinematic parameters of the converging walls of a cylindrical shell has been proposed.
Originality. A technique has been developed for determining the energy characteristics of an expanded laser beam, calculating the laser radiation energy required to initiate detonation simultaneously on the entire lateral cylindrical surface of a photosensitive explosive composite. The idea of technical implementation of the cumulation of converging cylindrical detonation and shock waves was developed further. A technique has been developed for the numerical determination of the change in the internal average compression rate of the shell during the movement of its walls towards the axis for various ratios of its external radius to the wall thickness and taking into account the increase in pressure in the converging detonation front.
Practical value. For the first time, a method for laser initiation of a converging cylindrical front of a detonation wave was developed and a device was tested that forms a converging cylindrical front of a detonation wave and a corresponding shock front in the material under study by the impact of a metal shell converging to the axis. The core of the device is a laser explosive initiation system that uses light-sensitive explosive composites to initiate an explosive charge.
Keywords: cylindrical shell, explosive, laser, initiation, detonation, kinematic parameters
References.
1. Stanyukovich, K.P. (1971). Unsteady motions of a continuous medium: monograph. Moscow: Nauka.
2. Nakai, S., & Takabe, H. (1996). Principles of inertial confinement fusion physics of implosion and the concept of inertial fusion energy. Reports on progress in physics, 59, 1071-1131. https://doi.org/10.1063/5.0023100.
3. Sedov, L.I. (1987). Similarity and Dimensional Methods in Mechanics: monograph. Moscow: Nauka.
4. Nakamura, Y. (1983). Analysis of self-similar problems of imploding shock waves by the method of characteristics. Physics of Fluids, 26, 1234. https://doi.org/10.1063/1.864273.
5. Zababakhin, Ye.I., & Zababakhin, I.Ye. (1988). Phenomena of unlimited cumulation: monograph. Moscow: Nauka.
6. Yusupaliyev, U., Sysoyev, N.N., Shuteyev, S.A., & Yelenskiy, V.G. (2015). The law of convergence of strong cylindrical and spherical shock waves in a gas with a uniform density. Pisma v Zhurnal eksperimentalnoy i teoreticheskoy fiziki, 101(9), 683-686.
7. Yusupaliev, U., Sysoev, N.N., Shuteev, S.A., & Belyakin, S.T. (2017). The self-similarity index of the convergence of strong cylindrical shock waves in a gas with a uniform/density. Moscow University Physics Bulletin, 72(6), 539-543.
8. Sokolov, I.V. (1990). Hydrodynamic cumulative processes in plasma physics. Uspekhi fizicheskikh nauk, 160(11), 140-166.
9. Trishin, Yu.A. (2000). On certain physical problems of cumulation. Prikladnaya mekhanika i tekhnicheskaya fizika, 1(5), 10-17.
10. Ben-Dor, G. (2017). Shock Wave Reflection Phenomena. Springer-Verlag Berlin Heidelberg. https://doi.org/10.1007/978-3-540-71382-1.
11. Konovalov, N.A., Pilipenko, O.V., Skorik, A.D., Kovalenko,V.I., Semenchuk, D.V., & Mikhaylov, S.P. (2015). Development and full-scale testing of small arms shot oppressors with spherical baffle elements. Tekhnicheskaya mekhanika, (1), 3-14.
12. Konovalov, N.A., Pilipenko, O.V., & Skorik, A.D. (2014). Small arms shot oppressors with a barrel expansion chamber. Tekhnicheskaya mekhanika, (3), 3-14.
13. Derentowicz, H., Kaliski, S., Wolski, J., & Ziolkowski, Z. (1977). Generation of Thermonuclear Fusion Neutrons by Means of a Pure Explosion. Bull. Academie Polonaise des Sciences, Serie Sciences Techniques, 25, 897-905.
14. Sobolev, V., Cabana, E.C., Howaniec, N., & Dychkovskyi, R. (2020). Estimation of Dense Plasma Temperature Formed under Shock Wave Cumulation. Materials, 13(21), 1-9, 4923. https://doi.org/10.3390/ma13214923.
15. Stamov, L.I., & Tyurenkova, V.V. (2018). Simulation of reflection and focusing of shock waves in a conical cavity in a chemically reacting gas. Matematicheskoye modelirovaniye, 30(3), 3-18.
16. Ndebele,B., & Skews, W. (2018). The reflection of cylindrical shock wave segments on cylindrical concave wall segments. Shock waves, 28(6), 1185.
17. Kheyfets, A.E., Zeldovich, V.I., & Frolova, N.Yu. (2017). Temperature-deformation effects during convergence of a steel cylindrical shell. In Zababakhinskiye nauchnyye chteniya: collection of materials of the XIII International Conference, (pp. 54-55). Snezhinsk: Izdatelstvo RFYATS VNIITF. Retrieved from http://irbiscorp.spsl.nsc.ru/fulltext/WORKS/2017/%D0%97%D0%9D%D0%A7-2017_%D0%A2%D0%B5%D0%B7%D0%B8%D1%81%D1%8B.pdf.
18. Romanov, G.S., & Urban, V.V. (1982). Numerical simulation of an explosive plasma generator taking into account the transfer of radiation energy and evaporation of the walls. Inzhenerno-fizicheskiy zhurnal, 43(6), 1012-1019.
19. Teslenko, A.G., Gubenko, S.I., Sobolev, V.V., & Slobodskoy,V.Ya. (1987). On the emergence of gas jets during explosive processing and their effect on the structure of iron alloys. Izvestiya vuzov. Chornaya metallurgiya, (12), 84-89.
20. Glass, I.I. (1977). Shock waves and the man: monograph. Moscow: Mir.
21. Rubidge, S., & Skews, B. (2014) Shear-layer instability in the Mach reflection of shock waves. Shock Waves, 24(5), 479-488. https://doi.org/10.1007/s00193-014-0515-6.
22. Chernai, A.V., Sobolev, V.V., Ilyushin, M.A., & Zhitnik, N.E. (1994). Generating mechanical pulses by the laser blasting of explosive coating. Combustion, Explosion, and Shock Waves, 30(2), 239-242.
23. Chernai, A.V., Sobolev, V.V., Ilyushin, M.A., Zhitnev, N.E., & Petrova, N.A. (1996). On the mechanism of ignition of energetic materials by a laser pulse. Chemical Physics Reports, 15(3), 457-462.
24. Chernai, A.V., Sobolev, V.V., Chernaj, V.A., Ilyushin, M.A., & Dlugashek, A. (2003). Laser initiation of charges on the basis of di-(3-hydrazino-4-amino-1,2,3-triazol)-copper (II) perchlorate. Fizika Goreniya i Vzryva, 39(3), 105-110. Retrieved from https://www.scopus.com/authid/detail.uri?authorId=7202818072.
25. Sobolev, V.V., Shiman, L.N., Nalisko, N.N., & Kirichenko, A.L. (2017). Computational modeling in research of ignition mechanism of explosives by laser radiation. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 53-60.
26. Sobolev, V.V., & Chernay, A.V. (2009). Explosion processing of materials using laser initiation of explosive charges. In High Energy Material Processing: Collection of Scientific Papers, (pp.173-181). Dnepropetrovsk: Art-Press.
27. Chernay, V.A., Bunchuk, Yu.P., & Pakhomov, S.N. (2003). Welding of heat exchanger tubes using optical initiation of explosive charges. Collection of scientific papers of the National Mining University, (18), 56-62.
28. Kaldiroly, P., & Knopfel, G. (Eds.) (1974). High energy density physics. Moscow: Mir.
29. Altshuler, L.V., Krupnikov, K.K., Fortov, V.Ye., & Funtikov,A.I. (2004). The elements of physics of megabar pressures. Vestnik Rossiyskoy akademii nauk, 74(11), 1011-1022.
30. Trunin,R.F. (Eds.) (1992). Properties of condensed substances at high pressures and temperatures. Sarov: VNIIEF.
31. Danilenko, V.V. (2010). Explosion: physics, engineering, technology: monograph. Moscow: Energoatomizdat.
32. Stanyukovich, K.P., Baum, F.A., & Shekhter, B.I. (2013). Explosion physics: monograph. Moscow: Ripol klassik.
33. Dudin, S.V., Sosikov, V.A., & Torunov, S.I. (2019). Laboratory explosive system for cylindrical compression. Combustion, Explosion, and Shock Waves, 55(4), 507-511. https://doi.org/10.15372/FGV20190419.
34. Kanel, G.I., Razorenov, S.V., Utkin, A.I., & Fortov, V.Ye. (1996). Shock-wave phenomena in condensed media: monograph. Moscow: Yanus-K.
35. Ilyushin, M.A., Smirnov, A.V., Sudarikov, A.M., Tselinskiy, I.V., Chernay, A.V., & Shugaley, I.V. (2010). Metal complexes in high-energy compositions: monograph. Sankt Peterburg: LGU im. A.S.Pushkina.
36. Chernaj, A.V., Sobolev, V.V., Ilyushin, M.A., & Zhitnik, N.E. (1994). The method of obtaining mechanical loading pulses based on a laser initiation of explosion of explosive coatings. Fizika Goreniya i Vzryva, 0(2), 106-111. Retrieved from https://www.researchgate.net/publication/292548581.
37. Soboliev, V., Bilan, N., & Kirichenko, O. (2014). Mechanism of additional noxious fumes formation when conducting blasting operations in rock mass. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 471-477. https://doi.org/10.1201/b17547.
38. Chernai, A.V., Sobolev, V.V., Chernaj, V.A., Ilyushin, M.A., & Dlugashek, A. (2003). Laser ignition of explosive compositions based on di-(3-hydrazino-4-amino-1,2,3-triazole)-copper(II) perchlorate. Combustion, Explosion and Shock, 39(3), 335-339.
39. Sobolev, V.V., Kulyvar, V.V., Kyrychenko, A.L., & Zazymko, V.I. (2018). Method of forming converging cylindrical shock waves. In Prospects for the development of alarm technologies, (pp. 136-141). Dnipro: Natsionalnyi Tekhnichnyi Universytet. Retrieved from http://ir.nmu.org.ua/handle/123456789/152337.
40. Sobolev, V.V., & Chernay, A.V. (2013). Use of the Monte Carlo method to solve the problem of detonation excitation in an explosive charge by a laser monopulse. Informatsionnyy byulleten Ukrainskogo soyuza inzhenerov-vzryvnikov, (1), 3-8.
41. Ilyushin, M., Shugaley, I., & Sudarikov, A. (2017). High-energy metal complexes: synthesis, properties, applications. Saarbrucken: Lap Lambert academic publishing GmbH&CO.KG.
42. Ilyushin, M.A., Tselinskiy, I.V., & Sudarikov, A.M. (2006). Developing components for high-energy compositions. Saint Petersburg: Leningradskiy gosudarstvennyy universitet im. A.S.Pushkina.
43. Matyushkin, N.I., & Trishin, Yu.A. (1978). On some effects arising from explosive compression of a viscous cylindrical shell. Prikladnaya matematika i tekhnicheskaya fizika, (3), 99-112.
44. Mikhaylov, A.N., Gordopolov, Yu.A., & Dromin, A.N. (1974). Collapse of thin-walled pipes under explosive loading. Fizika goreniya i vzryva, (2), 277-284.
45. Kashirskiy, A.V., Korovin, Yu.V., Odintsov, V.A., & Chudov,P.A. (1972). Numerical solution of a two-dimensional non-stationary problem of shell motion under the action of detonation products. Prikladnaya matematika i tekhnicheskaya fizika, (4), 76-79.
Newer news items:
- Problems of criminal liability for illegal amber mining in Ukraine - 29/12/2021 01:25
- Improvement of modeling techniques of transients in transformers based on magnetoelectric equivalent schemes - 29/12/2021 01:25
- Analyzing and identifying the limits of 660V grid parameters to ensure electrical safety in underground coal mines - 29/12/2021 01:25
- High-frequency periodic processes in two-winding power transformers - 29/12/2021 01:25
- New approach to injection of pressurizing gas into fuel tanks of power units - 29/12/2021 01:25
- Variation coefficient of torsional vibrations of the connection nodes of vibrating machines - 29/12/2021 01:25
- Ways to reduce hydraulic losses in multistage centrifugal pumping equipment for mining and oil-producing industries - 29/12/2021 01:25
- Improving the capacity of mine degassing pipelines - 29/12/2021 01:25
- Sand-sodium-silicate mixtures structured in steam-microwave environment effective values of thermo-physical properties - 29/12/2021 01:25
- Co-firing of gas coal dust fine particles and synthetic peat gas. Part 1. Simulation of processes of steam-air gasification of peat in a fixed bed and combustion of dust and gas mix in a stream - 29/12/2021 01:25
Older news items:
- Assessing the quality of drilling-and-blasting operations at the open pit limiting contour - 29/12/2021 01:25
- Simulation of amber extraction processes from sandy and clay rocks with stope filling - 29/12/2021 01:25
- Numerical simulation of the open pit stability based on probabilistic approach - 29/12/2021 01:25
- Improvement of oil field development using enhanced oil recovery methods - 29/12/2021 01:25
- Effect of geological and technological parameters on the convergence in a stope - 29/12/2021 01:25
- Petrographical and microfacies study of Sinjar formation in Bazyan anticline, Sulaimaniyah region (Northern Iraq) - 29/12/2021 01:25
- Forecast changes in the geodynamic regime of geological environment during large-scale subsoil development - 29/12/2021 01:25