Dynamic analysis of thin laminated viscoelastic structures under elevated temperature using finite element modeling
/ 2
- Details
- Category: Content №6 2020
- Last Updated on 22 December 2020
- Published on 30 November -0001
- Hits: 2610
Authors:
Fadi Alfaqs, orcid.org/0000-0003-3427-6454, Faculty of Engineering Technology, Department of Mechanical Engineering, Al-Balqa Applied University, Amman, Jordan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2020, (6): 028 - 033
https://doi.org/10.33271/nvngu/2020-6/028
Abstract:
Purpose. The current study is devoted to investigating the effect of elevated temperature on interlaminar stresses for different laminated viscoelastic structures and boundary conditions. Each structure considered consists of three laminated layers, where the core layer is made of plasticized polyvinyl butyral, which is a viscoelastic material, whereas both constraining layers are made of isotropic structural material silica float glass.
Methodology. Finite element (FE) modeling is used to perform modal, harmonic, and transient analyses. The current viscoelastic composite model is compared to data in literature for verification purposes. Simply supported beam, cantilever, and simply supported plate are studied for temperature variation of 23, 40, 50, and 60 C. Modal analysis is carried out to find natural frequencies for all the structures considered.
Findings. The results obtained show that increasing temperature plays a significant role in reducing the natural frequencies in each structure as well as increasing the transverse deflections and decreasing the corresponding interlaminar shear stresses.
Originality. The literature does not contain a study on the influence of elevated temperatures on interfacial dynamic stresses in laminated viscoelastic structures.
Practical value. One of the main factors affecting the delamination process of composite viscoelastic sandwich structures is the interfacial harmonic shear stresses existing between layers. Hence, harmonic and transient analyses are performed to determine dynamic deflections and interlaminar shear stresses.
Keywords: deflections, beam, dynamics, modeling, shear, vibration, viscoelastic materials
References.
1. Fotsing, E., Sola, M., Ross, A., & Ruiz, E. (2013). Dynamic characterization of viscoelastic materials used in composite structures. Journal of Composite Materials, 48(30), 3815-3825. https://doi.org/10.1177/0021998313514254.
2. Zhao, L., & Wu, J. (2013). Natural frequency and vibration modal analysis of composite laminated plate. In: Advanced Materials Research, (2013), (pp. 396-400). https://doi.org/10.4028/www.scientific.net/AMR.711.396.
3. Song, X., Cao, T., Gao, P., & Han, Q. (2020). Vibration and damping analysis of cylindrical shell treated with viscoelastic damping materials under elastic boundary conditions via a unified Rayleigh-Ritz method. International Journal of Mechanical Sciences, 165, 1-17. https://doi.org/10.1016/j.ijmecsci.2019.105158.
4. Corts, F., & Sarra, I. (2015). Dynamic Analysis of Three-Layer Sandwich Beams with Thick Viscoelastic Damping Core for Finite Element Applications. Shock and Vibration, 2015, 1-9. https://doi.org/10.1155/2015/736256.
5. Huang, Z., Wang, X., Wu, N., Chu, F., & Luo, J. (2019). Afinite element model for the vibration analysis of sandwich beam with frequency-dependent viscoelastic material core. Materials, 12(20), 1-15. https://doi.org/10.3390/ma12203390.
6. Boumediene, F., Daya, E.M., Cadou, J.-M., & Duigou, L. (2016). Forced harmonic response of viscoelastic sandwich beams by a reduction method. Mechanics of Advanced Materials and Structures, 23(11), 1290-1299. https://doi.org/10.1080/15376494.2015.1068408.
7. Rajesh, C., & Suresh Kumar, J. (2016). Free Vibration Analysis of Viscoelastic Sandwich Beam using Euler Bernoulli Theory. International Journal of Engineering Research & Technology (IJERT), 5(06). https://doi.org/10.17577/IJERTV5IS060739.
8. Joseph, S.V., & Mohanty, S.C. (2017). Temperature effects on buckling and vibration characteristics of sandwich plate with viscoelastic core and functionally graded material constraining layer. Journal of Sandwich Structures and Materials, 21(4), 1557-1577. https://doi.org/10.1177/1099636217722309.
9. Daniel, I.M. (2014). Failure of composite materials under multi-axial static and dynamic loading. In: Procedia Engineering. (2014), (pp. 10-17). https://doi.org/10.1016/j.proeng.2014.11.120.
10. Sadarang, J., Nayak, S., Nayak, G., Panigrahi, I., & Nayak, R.K. (2018). Dynamic analysis for delamination detection in carbon fiber composite beam. In: IOP Conference Series: Materials Science and Engineering, (2018), (pp. 1-6). https://doi.org/10.1088/1757-899X/402/1/012143.
11. Naveen Raj, C., Praveen, N., & Sandeep Kumar, J. (2016). Dynamic Analysis of Composite Plate using Finite Element Analysis. International Journal of Engineering Research & Technology, 5(11), 270-282. ISSN: 2278-0181.
12. Shojaei, A., Li, G., Tan, P.J., & Fish, J. (2015). Dynamic delamination in laminated fiber reinforced composites: A continuum damage mechanics approach. International Journal of Solids and Structures, 71, 262-276. https://doi.org/10.1016/j.ijsolstr.2015.06.029.
13. Shen, Y., Tan, J., Fernandes, L., Qu, Z., & Li, Y. (2019). Dynamic mechanical analysis on delaminated flax fiber reinforced composites. Materials, 12(16). https://doi.org/10.3390/ma12162559.
14. Filippatos, A., Langkamp, A., & Gude, M. (2018). Influence of gradual damage on the structural dynamic behaviour of composite rotors: Simulation assessment. Materials, 11(12). https://doi.org/10.3390/ma11122453.
15. Aveiga, D., & Ribeiro, M.L. (2018). ADelamination Propagation Model for Fiber Reinforced Laminated Composite Materials. Mathematical Problems in Engineering, 2018, 1-9. https://doi.org/10.1155/2018/1861268.
16. Luca, A.De., & Caputo, F. (2017). Areview on analytical failure criteria for composite materials. AIMS Materials Science, 4(5), 1165-1185. https://doi.org/10.3934/matersci.2017.5.1165.
17. Qi, L., & Liu, H. (2015). Thermoviscoelastic dynamic response for a composite material thin narrow strip. Journal of Mechanical Science and Technology, 31(1), 625-635. https://doi.org/10.1007/s12206-015-0122-1.
Newer news items:
- Determining conditions of using draglines in single-tier internal dump formation - 22/12/2020 00:15
- Obtaining kinetic characteristics of combustion of the coke from solid biofuels - 22/12/2020 00:15
- Influence of particle geometry on the efficiency of operation of quasistatic and inertial disintegrators - 22/12/2020 00:15
- Sodium silicate solute foaming in a flat slot-type capillary under microwave radiation influence - 22/12/2020 00:15
- Effect of alloying heat-resistant packing coatings on their tribotechnical, physical and mechanical properties - 22/12/2020 00:15
- Forecasting of wear of pads of modernized brake system devices of bogies of freight cars using ARIMA models - 22/12/2020 00:15
- Assessment of geotechnical properties of Draa El Mizane highway tunnel (Algeria) - 22/12/2020 00:15
- Energy-efficient predictive control for field-orientation induction machine drives - 22/12/2020 00:15
- Integrated system of modular power supply and multilevel control of brushless dc motor for electric vehicles - 22/12/2020 00:15
- Adaptation of the high-pressure electrolyzer in the conditions of joint operation with TPP and NPP power-generating units - 22/12/2020 00:15
Older news items:
- Determining conditions of using draglines in single-tier internal dump formation - 22/12/2020 00:15
- Obtaining kinetic characteristics of combustion of the coke from solid biofuels - 22/12/2020 00:15
- Influence of particle geometry on the efficiency of operation of quasistatic and inertial disintegrators - 22/12/2020 00:15
- Sodium silicate solute foaming in a flat slot-type capillary under microwave radiation influence - 22/12/2020 00:15
- Effect of alloying heat-resistant packing coatings on their tribotechnical, physical and mechanical properties - 22/12/2020 00:15
- Forecasting of wear of pads of modernized brake system devices of bogies of freight cars using ARIMA models - 22/12/2020 00:15
- Assessment of geotechnical properties of Draa El Mizane highway tunnel (Algeria) - 22/12/2020 00:15
- Energy-efficient predictive control for field-orientation induction machine drives - 22/12/2020 00:15
- Integrated system of modular power supply and multilevel control of brushless dc motor for electric vehicles - 22/12/2020 00:15
- Adaptation of the high-pressure electrolyzer in the conditions of joint operation with TPP and NPP power-generating units - 22/12/2020 00:15
Archive