Adaptation of the high-pressure electrolyzer in the conditions of joint operation with TPP and NPP power-generating units
/ 2
- Details
- Category: Content №6 2020
- Last Updated on 22 December 2020
- Published on 30 November -0001
- Hits: 2209
Authors:
A.A.Shevchenko, orcid.org/0000-0002-6009-2387, A.M.Pidhorny Institute of Mechanical Engineering Problems of NASU, Kharkiv, Ukraine. e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.M.Zipunnikov, orcid.org/0000-0002-0579-2962, A.M.Pidhorny Institute of Mechanical Engineering Problems of NASU, Kharkiv, Ukraine. e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.L.Kotenko, orcid.org/0000-0003-2715-634X, A.M.Pidhorny Institute of Mechanical Engineering Problems of NASU, Kharkiv, Ukraine. e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2020, (6): 076 - 082
https://doi.org/10.33271/nvngu/2020-6/076
Abstract:
Purpose. To substantiate the need to adapt the high pressure electrolyzer (HPE) to the conditions of joint operation with TPP and NPP power generating units to solve the problem of operating power generating units in the basic mode and to ensure the use of excess electrical power produced during periods of its minimal consumption for generating hydrogen and oxygen with their subsequent use during the electrical power peak consumption. This will allow reducing the number of start stop modes caused by unevenness of the of electrical consumption schedule.
Methodology. Studying of electrochemical process of hydrogen and oxygen generation for their subsequent use in the technological schemes of TPP and NPP power generating units is based on the laws of mass conservation, thermodynamics, electrical engineering and electrochemistry when applying the data obtained from simulation and physical modeling methods.
Findings. We have studied the peculiarities of the use of hydrogen as a fuel under electrical energy production. The product of hydrogen combustion in oxygen is superheated water vapor the working substance of modern steam turbines. The steam can be sent to a steam turbine where it performs an operation expanding. There were analyzed prospects of joint operating the power generating units with a high-pressure electrolyzer under the basic mode when the excess electricity produced in the minimal consumption periods was used for generating hydrogen and oxygen. Ways for modernization of the existing steam turbine installations were offered for work on variable modes (including the peak electrical energy consumption). Technological schemes of TPP and NPP power generating units have been improved and thermodynamic parameters of the cycles have been increased.
Originality. The calculated data show that when a steam turbine cycle is carried out with hydrogen superheated steam at 101, the thermodynamic efficiency of the hydrogen fuel use can be 1.52 times higher than efficiency of the natural gas use in gas turbines, and the coefficient of electrical power regeneration can be from 40 to 50%.
Practical value. A scheme for arranging the block of four electrolysis cells modules and a schematic diagrams of the basic types of hydrogen-oxygen steam generators have been developed; a set of works was completed aimed at developing scientific and technical principles for creating the new highly economic power generating units of increased maneuverability.
Keywords: electrolyzer, hydrogen, oxygen, steam generator, steam-gas turbine
References.
1. Report on the assessment of compliance (sufficiency) of generating capacity (n.d.). Retrieved from https://ua.energy/wp-content/uploads/2019/10/Zvit-z-otsinky-vidpovidnosti-vid-31.10.19.pdf.
2. Aminov,R.Z., Bairamov, A.N., & Garievskii,M.V. (2019). Assessment of the Performance of a NuclearHydrogen Power Generation System. Thermal Engineering, 66(3), 196-209. https://doi.org/10.1134/S0040601519030017.
3. Aminov, R.Z., Shkret,A.F., & Garievskii, M.V. (2016). Estimation of lifespan and economy parameters of steam-turbine power units in thermal power plants using varying regimes. Thermal Engineering, 63, 551-557. https://doi.org/10.1134/S0040601516080012.
4. Dli, M.I., Baliabina, A.A., & Drozdova, N.V. (2015). Hydrogen energy and development prospects. Alternative Energy and Ecology (ISJAEE), 22, 37-41. https://doi.org/10.15518/isjaee.2015.22.004.
5. OAO Uralkhimmash (n.d.). Electrolyzers. Retrieved from https://elkt.com.ua/electrolyzers/28-electrolizer-fv.
6. TELEDYNE TITAN EC-500 (n.d.). Retrieved from http://www.teledynees.com/products/Hydrogen%20Oxygen%20Generation%20Systems/Product%20Files/TESI_Brochure_TITAN_EC_Series_English_2013.pdf.
7. HySTATTM A Energy Station (n.d.). Retrieved from: http://www.drivehq.com/file/df.aspx/isGallerytrue/shareID452352/fileID27809605?1=1.
8. Wasserstoffprojekt Flughafen Mnchen. Gesellschaft fr Hochleistung Elektrolyse GHW (n.d.). Retrieved from https://www.linde gas.de/de/images/argemuc_projektbeschreibung_tcm565-71308.pdf.
9. Smart Hydrogen Station (SHS) (n.d.). Retrieved from https://global.honda/innovation/FuelCell/smart-hydrogen-station-engineer-talk.html.
10. HOGEN H Series Technical Specifications (n.d.). Retrieved from https://diamondlite.com/wp-content/uploads/2017/05/H-Serie-Englisch-1.pdf.
11. Langemann,M., Fritz,D., Mller,M., & Stolten,D. (2015). Validation and characterization of suitable materials for bipolar plates in PEM water electrolysis. International Journal of Hydrogen Energy, 40(35), 11385-11391. https://doi.org/10.1016/j.ijhydene.2015.04.155.
12. Phillips,R., & Dunnill,C. (2016). Zero gap alkaline electrolysis cell design for renewable energy storage as hydrogen gas. RSC Advances, 6(102), 100643-100651. https://doi.org/10.1039/C6RA22242K
13. Shevchenko, A., Zipunnikov, M., Kotenko, A., Vorobiova, I., & Semykin, V. (2019). Study of the Influence of Operating Conditions on High Pressure Electrolyzer Efficiency. Journal of Mechanical Engineering, 22(4), 53-60. https://doi.org/10.15407/pmach2019.04.053.
14. Zipunnikov, M.M. (2019). Formation of potassium ferrate in a membrane-less electrolysis process of water decomposition. Issues of Chemistry and Chemical Technology. Dnieper, 1, 42-47. https://doi.org/10.32434/0321-4095-2019-126-5-42-47.
15. Shevchenko, A. (2020). Creation of autonomous and network energy-technological complexes with a hydrogen storage of energy. Vidnovliuvana Energetika, 61(2), 18-27. https://doi.org/10.36296/1819-8058.2020.2(61).18-27.
16. Solovey, V.V., Khiem, N.T., Zipunnikov, M.M., & Shevchenko, A.A. (2018). Improvement of the Membrane-less Electrolysis Technology for Hydrogen and Oxygen Generation. French-Ukrainian Journal of Chemistry, 6(2), 73-79. https://doi.org/10.17721/fujcV6I2P73-79.
17. Rusanov, A., Solovey, V., Zipunnikov, M., & Shevchenko,A. (2018). Thermogasdynamics of physical and energy processes in alternative technologies. Thermogasdynamics of physical and energy processes in alternative technologies. PC Technology Center. https://doi.org/10.15587/978-617-7319-18-3.
18. Aminov,R.Z., & Bairamov,A.N. (2017). Performance evaluation of hydrogen production based on off-peak electric energy of the nuclear power plant. International Journal of Hydrogen Energy, 42, 21617-21625. https://doi.org/10.1016/j.ijhydene.2017.07.132.
19. Aminov, R.Z., Bairamov, A.N., & Garievskii, M.V. (2020). Estimating the system efficiency of the multifunctional hydrogen complex at nuclear power plants. International Journal of Hydrogen Energy, 45(29), 14614-14624. https://doi.org/10.1016/j.ijhydene.2020.03.187.
Newer news items:
- Determining conditions of using draglines in single-tier internal dump formation - 22/12/2020 00:15
- Obtaining kinetic characteristics of combustion of the coke from solid biofuels - 22/12/2020 00:15
- Influence of particle geometry on the efficiency of operation of quasistatic and inertial disintegrators - 22/12/2020 00:15
- Dynamic analysis of thin laminated viscoelastic structures under elevated temperature using finite element modeling - 22/12/2020 00:15
- Sodium silicate solute foaming in a flat slot-type capillary under microwave radiation influence - 22/12/2020 00:15
- Effect of alloying heat-resistant packing coatings on their tribotechnical, physical and mechanical properties - 22/12/2020 00:15
- Forecasting of wear of pads of modernized brake system devices of bogies of freight cars using ARIMA models - 22/12/2020 00:15
- Assessment of geotechnical properties of Draa El Mizane highway tunnel (Algeria) - 22/12/2020 00:15
- Energy-efficient predictive control for field-orientation induction machine drives - 22/12/2020 00:15
- Integrated system of modular power supply and multilevel control of brushless dc motor for electric vehicles - 22/12/2020 00:15
Older news items:
- Determining conditions of using draglines in single-tier internal dump formation - 22/12/2020 00:15
- Obtaining kinetic characteristics of combustion of the coke from solid biofuels - 22/12/2020 00:15
- Influence of particle geometry on the efficiency of operation of quasistatic and inertial disintegrators - 22/12/2020 00:15
- Dynamic analysis of thin laminated viscoelastic structures under elevated temperature using finite element modeling - 22/12/2020 00:15
- Sodium silicate solute foaming in a flat slot-type capillary under microwave radiation influence - 22/12/2020 00:15
- Effect of alloying heat-resistant packing coatings on their tribotechnical, physical and mechanical properties - 22/12/2020 00:15
- Forecasting of wear of pads of modernized brake system devices of bogies of freight cars using ARIMA models - 22/12/2020 00:15
- Assessment of geotechnical properties of Draa El Mizane highway tunnel (Algeria) - 22/12/2020 00:15
- Energy-efficient predictive control for field-orientation induction machine drives - 22/12/2020 00:15
- Integrated system of modular power supply and multilevel control of brushless dc motor for electric vehicles - 22/12/2020 00:15
Archive