The influence of fissured material on tunnel stability (a numerical study)
/ 1
- Details
- Parent Category: 2022
- Category: Content №6 2022
- Created on 25 December 2022
- Last Updated on 25 December 2022
- Published on 30 November -0001
- Written by Taleb Hosni Abderrahmane, Guemidi Ismahene
- Hits: 2471
Authors:
Taleb Hosni Abderrahmane*, orcid.org/0000-0001-8942-9492, FIMAS Laboratory, University of Bechar, Algeria; Department of Civil Engineering and Hydraulic, Institute of Science and Technology, University Center of Mila, Mila, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Guemidi Ismahene, orcid.org/0000-0002-0486-9622, FIMAS Laboratory, University of Bechar, Algeria; University Chadli Bendjedid, El Tarf, Algeria
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (6): 059 - 067
https://doi.org/10.33271/nvngu/2022-6/059
Abstract:
Purpose. To understand the effect of fissured material on tunnels. These infrastructure tunnels must be safe in all respects, including construction, materials, and more. One of the challenges which engineers face is the need to consider material types as well as fissured material. As a result, in order to ensure the safety of the tunnel, it is important for us to anticipate possible precipitation, displacements, stresses and strains caused by the construction of tunnels in fractured environments.
Methodology. The OPTUMG2 software was used for thisnumerical study, the tunnel was modeled applying the hypothesis of two-dimensional plane deformation with the use of the finite element method, which is used to model continuous media. The Mohr-Coulomb criterium was considered to simulate the elastoplastic nonlinear behaviour of this model.
Findings. The ndings demonstrate that the orientation of weakness planes can have a major impact on tunnel stability. Thus, it was observed that 45, and 60 for angle 1, and 110, and 135 for the second angle 2 present the most critical situations. The influence of fissured material (soil) on civil engineering projects such as tunneling should be taken into consideration.
Originality. The tunnels stability is determined by the measuring of the displacement (settlement), stresses, and deformation, under the effect of the fissured material in the environment. In this paper we simulated a model with various crack angles. As for the orientation of plane, for the angl3e 1 the values are changed to 0, 20, 45, 65, and 90, the second angle 2 was changed from 110, 135, 155, 175, to 180.
Practical value. The number of tunnels and infrastructure projects is constantly increasing. This is because they are important for the development of countries and for accelerating economic growth, shortening distances and travel time by linking urban areas that have natural obstacles such as mountains. We found that the orientation planes can have a major impact on tunnel stability. Thus, it was observed that 45, and 60 for first angle, and 110, and 135 for the second angle present the most critical situations.
Keywords: modelling of tunnel, fissured material, finite element method, settlement of soil, OPTUMG2 software
References.
1. di Prisco, C., Peila, D., & Pigorini, A. (2022). Handbook on Tunnels and Underground Works (1st ed.). CRC Press. ISBN 9781003256175.
2. Athar, M.F., Zaid, M., & Sadique, Md.R. (2019). Stability of Different shapes of Tunnels in Weathering Stages of Basalt. In Proceedings: National Conference on Advances in Structural Technologies (CoAST-2019), NIT Silchar. India. Retrieved from http://www.nits.ac.in/conferences/CoAST_2019/CoAST_2019.html.
3. Khana, Z.A., Khana, Md.S., Sadiquea, M.R., Samantab, M., & Alama, M.M. (2021). Response of Twin Transportation Tunnel in Earthquake Loading: A Review 2021. IOP Conference Series: Earth and Environmental Science, 796, 012044. https://doi.org/10.1088/1755-1315/796/1/012044.
4. Shah, I.A., & Zaid, M. (2020). Behavior of Underground Tunnel under Strong Ground Motion. In Proceedings of Indian Geotechnical conference 2020, December 17-19, 2020, (pp. 229-239). Retrieved from https://www.researchgate.net/publication/348336923_Behavior_of_Underground_Tunnel_under_Strong_Ground_Motion.
5. Zaid, M., Irfan, S., & Farooqi, M.A. (2019). Effect of Cover Depth in Unlined Himalayan Tunnel: A Finite Element Approach. In Proceeding of 8th Indian Rock conference, Indian International Centre, New Delhi, India, 0304 March 2019, (pp. 448-454). ISBN No. 81-86501-27-1.
6. Shahin, H.M., Nakai, T., Zhang, F., Kikumoto, M., & Nakahara,E. (2011). Behavior of ground and response of existing foundation due to tunneling. Soils and foundations, 51(3), 395-409.
7. Pakbaz, M.C., & Yareevand, A. (2005). 2-D analysis of circular tunnel against earthquake loading. Tunnelling and Underground Space Technology, 20(5), 411-417.
8. Mroueh, H., & Shahrour, I. (2003). A full 3-D finite element analysis of tunneling adjacent structures interaction. Computers and Geotechnics, 30(3), 245-253.
9. Hu, X., Fu, W., Wu, S., Fang, Yo., Wang, J., & He, Ch. (2021). Numerical study on the tunnel stability in granular soil using DEM virtual air bag model. Acta Geotechnica, 16, 3285-3300. https://doi.org/10.1007/s11440-020-01130-4.
10. Negro, A., & Queiroz, B.I.P. (2000). Prediction and performance of soft ground tunnels. In Geotechnical aspects of underground construction in soft ground, (pp. 409-418). Balkema, Tokyo, Japan.
11. Muniz de Farias, M., Junior, A.H.M., & Pacheco de Assis, A. (2004). Displacement control in tunnels excavated by the NATM: 3-D numerical simulations. Tunnelling and Underground Space Technology, 19(3), 283-293.
12. Do, N.-A., Dias, D., Oreste, P., & Djeran-Maigre, I. (2014). 2D Tunnel Numerical Investigation: The Influence of the Simplified Excavation Method on Tunnel Behaviour. Geotechnical and Geological Engineering, 32, 43-58.
13. Vermeer, P.A., Bonnier, P.G., & Mller, S.C. (2002). On a smart use of 3D-FEM in tunnelling. In International symposium; 8th, Numerical models in geomechanics; NUMOG VIII, (pp. 361-366).
14. Liu, H.Y., Small, J.C., Carter, J.P., & Williams, D.J. (2009). Effects of tunnelling on existing support systems of perpendicularly crossing tunnels. Computers and Geotechnics, 36(5), 880-894.
15. Nogueira, C.D.L., de Azevedo,R.F., & Zornberg, J.G. (2011). Validation of Coupled Simulation of Excavations in Saturated Clay: Camboinhas Case History. International Journal of Geomechanics, 11(3), 5622. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000077.
16. Yang, F., Zhang, J., Zhao, L., & Yang, J. (2015). Upper-bound Finite Element Analysis of Stability of Tunnel Face Subjected to Surcharge Loading in Cohesive-frictional Soil. KSCE Journal of Civil Engineering, 20, 2270-2279.
17. Zaid, M. (2021). Dynamic stability analysis of rock tunnels subjected to impact loading with varying UCS. Geomechanics and Engineering, 24(6), 505-518. https://doi.org/10.12989/gae.2021.24.6.505.
18. Zaid, M. (2021). Three-dimensional finite element analysis of urban rock tunnel under static loading condition: Effect of the rock weathering. Geomechanics and Engineering, 25(2), 99-109. https://doi.org/10.12989/gae.2021.25.2.000.
19. Sadique, M.R., Zaid, M., & Alam, M.M. (2022). Rock Tunnel Performance Under Blast Loading Through Finite Element Analysis. Geotechnical and Geological Engineering, 40, 35-56. https://doi.org/10.1007/s10706-021-01879-9.
20. Zaid, M., Sadique, Md.R., Alam, M.M., & Samanta, M. (2020). Effect of Shear Zone on Dynamic Behaviour of Rock Tunnel Constructed in Highly Weathered Granite. Geomechanics and Engineering, 23(3), 245-59. https://doi.org/10.12989/GAE.2020.23.3.245.
21. Zaid, M. (2021). Preliminary Study to Understand the Effect of Impact Loading and Rock Weathering in Tunnel Constructed in Quartzite. Geotechnical and Geological Engineering. https://doi.org/10.1007/s10706-021-01948-z.
22. Zaid, M., Sadique, M.R., & Alam, M.M. (2022). Blast Resistant Analysis of Rock Tunnel Using Abaqus: Effect of Weathering. Geotechnical and Geological Engineering, 40, 809-832. https://doi.org/10.1007/s10706-021-01927-4.
23. Zaid, M., & Shah, I.A. (2021). Numerical Analysis of Himalayan Rock Tunnels under Static and Blast Loading. Geotechnical and Geological Engineering, 39, 5063-5083. https://doi.org/10.1007/s10706-021-01813-z.
24. Wang, S., Qu, T., Fang, Y., Fu, J., & Yang, J. (2019). Stress responses associated with earth pressure balance shield tunneling in dry granular ground using the discrete-element method. International Journal of Geomechanics, 19(7), 04019060. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001434.
25. Zheng, X., Booker, J.R., & Carter, J.P. (2000). Limit analysis of the bearing capacity of fissured materials. International Journal of Solids and Structures, 37, 1211-1243.
26. Krabbenhoft, K., Lyamin, A., & Krabbenhoft, J. (2016). Optum computational engineering (OptumG2). Computer software. Retrieved from https://www. optumce.com.
Newer news items:
- Improving transport logistics of extractive industry products in the context of capacity constraints on the railways - 25/12/2022 02:37
- Computer modeling of territory flooding in the event of an emergency at Seredniodniprovska Hydroelectric Power Plant - 25/12/2022 02:37
- Study on accumulation of heavy metals by green plantations in the conditions of industrial cities - 25/12/2022 02:37
- Heavy metals removal using natural zeolite adsorption from Tigris river water at Samarra city (Iraq) - 25/12/2022 02:37
- Improvement of the safe work system - 25/12/2022 02:37
- Impact of digital maturity on sustainable development effects in energy sector in the condition of Industry 4.0 - 25/12/2022 02:37
- Influence of misalignment of connection of electrical machine shafts on the nature of electric power of the induction motor - 25/12/2022 02:37
- Determination of the deformation parameters of the steel reinforcing phase inside the aluminum matrix during hot rolling - 25/12/2022 02:37
- Minimization of dynamic changes in the tension of long products behind the outlet cage in rolling stock production in coils - 25/12/2022 02:37
- Approximation of blades of radial machines with multiparameter family of smooth surfaces - 25/12/2022 02:37
Older news items:
- Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process - 25/12/2022 02:37
- Numerical study on deformation around underground mining structures (Algeria) - 25/12/2022 02:37
- Substantiation of research results on energy efficiency of basalt crushing - 25/12/2022 02:37
- Research on the rational profile of exit trails of auto transport in deep open mines - 25/12/2022 02:37
- Determining the parameters of stratification cavity in rock mass to extract mine methane - 25/12/2022 02:37
- Haul road condition impact on tire life of mining dump truck - 25/12/2022 02:37
- Mathematical modeling the quarry wall stability under conditions of heavily jointed rocks - 25/12/2022 02:37
- Energy efficient technologies for the mining industry - 25/12/2022 02:37
- Technology of an open pit refinement under limit stability of sides - 25/12/2022 02:37
