Research on the rational profile of exit trails of auto transport in deep open mines
- Details
- Category: Content №6 2022
- Last Updated on 25 December 2022
- Published on 30 November -0001
- Hits: 2510
Authors:
A.V.Pavlychenko, orcid.org/0000-0003-4652-9180, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.O.Shustov*, orcid.org/0000-0002-2738-9891, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
T.M.Kaliuzhna, orcid.org/0000-0003-0042-3575, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.O.Otiuskyi, orcid.org/0000-0002-7822-4165, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (6): 036 - 040
https://doi.org/10.33271/nvngu/2022-6/036
Abstract:
Purpose. Technical and economical justification of the parameters of the profile of exit trails without horizontal sections in the operation of road transport in deep open mines.
Methodology. To solve the objectives, the following methods were used: analytical, graphic methods, mathematical modeling, comparison of options, and analogies. These research methods are used when studying and justifying of a rational profile of exit trails of auto transport in the open mine, as well as defining the width of the working platforms of the excavator, and doing technical-economical calculations of the proposed solutions.
Findings. Based on the performed analysis of parameters determining the distance of transportation of rock mass, it was found that when using the exit trails without horizontal sections, the transportation distance is 300 m, and with horizontal sections 531.3m, which exceeds the former by 1.77 times. The trip time when using the transportation scheme without horizontal sections is 7.44 min, and when using it with horizontal sections, it is 8.42 min. It is proved that the use of exit trails without horizontal sections in the open mine of Poltava Mining and Processing Plant reduces the cost of diesel fuel by 42.57% and capital costs by 40.5%.
Originality. A comparison of the actual distance of transportation, and time of dump truck trip by component operations is carried out, and expenses for maintenance of open mine roads when using trails with horizontal sections and without them are calculated. The scheme of exit trails without horizontal sections has been offered for the first time, which allows a reduction in the distance of transportation of rock mass by dump trucks with a reduction of rock volume for carrying out conventions by 57%.
Practical value. The developed scheme of the route profile without horizontal sections can be applied to overburdening operations, and the development and deepening of open mines for the extraction of different types of minerals, such as iron ore and hard coal. The expected economic effect from the introduction of trails without horizontal sections is determined by the reduction of diesel fuel costs by 52.9 UAH/t.km, and accordingly 1.68 million UAH for the conduction of conventions.
Keywords: iron ore, deep open mine, dump truck, horizontal sections, technical and economic indicators
References.
1.Moldabayev, S., Sultanbekova, Z., Adamchuk, A., & Sarybayev, N. (2019). Method of optimizing cyclic and continuous technology complexes location during finalization of mining deep ore open pit mines. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 19(1.3), 407-414. https://doi.org/10.5593/sgem2019/1.3/S03.042.
2.Haddad, J.S., Denyshchenko, O., Kolosov, D., Bartashevskyi, S., Rastsvietaiev, V., & Cherniaiev, O. (2021). Reducing Wear of the Mine Ropeways Components Basing Upon the Studies of Their Contact Interaction. Archives of Mining Sciences, 66(4), 579-594. https://doi.org/10.24425/ams.2021.139598.
3.Gumenik, I., & Lozhnikov, O. (2015). Current condition of damaged lands by surface mining in Ukraine and its influence on environment. New developments in mining engineering. Theoretical and practical solution of mineral resources mining, 139-145. Retrieved from https://www.taylorfrancis.com/chapters/edit/10.1201/b19901-25/current-condition-damaged-lands-surface-mining-ukraine-influence-environment-gumenik-lozhnikov.
4.Khomenko, O., Kononenko, M., & Lyashenko, V. (2018). Safety Improving of Mine Preparation Works at the Ore Mines.Occupational Safety in Industry, (5), 53-59. http://doi.org/10.24000/0409-2961-2018-5-53-59.
5.Cheberiachko, S., Yavorska, O., Hridiaiev, V., & Yavorskyi, A. (2019). Studying the efficiency of a complex individual protective device. E3S Web of Conferences,2019, 123, 01028. https://doi.org/10.1051/e3sconf/201912301028.
6.Lozhnikov, O., Shustov, O., Chebanov, M., & Perkova, T. (2022). Methodological principles of the selection of a resource-saving technology while developing water-bearing placer deposits. Mining of Mineral Deposits, 16(3), 115-122. https://doi.org/10.33271/mining16.03.115.
7. Cherniaiev, O., Pavlychenko, A., Romanenko, O., & Vovk, Y. (2021). Substantiation of resource-saving technology when mining the deposits for the production of crushed-stone products. Mining of Mineral Deposits, 15(4), 99-107. https://doi.org/10.33271/mining15.04.099.
8.Moldabayev, S., Adamchuk, A., Sarybayev, N., & Shustov, A. (2019). Improvement Of Open Cleaning-Up Schemes of Border Mineral Reserves. 19th SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings19th, Science and Technologies in Geology, Exploration and Mining, 19, 331-338. https://doi.org/10.5593/sgem2019/1.3/S03.042.
9. Sdvyzhkova, O., Babets, D., Moldabayev, S., Rysbekov, K., & Sarybayev, M. (2020). Mathematical modeling a stochastic variation of rock properties at an excavation design. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 165-172. https://doi.org/10.5593/sgem2020/1.2/s03.021.
10.Pavlychenko, A.V., Ihnatov, A.O., Koroviaka, Y.A., Ratov, B.T., & Zakenov, S.T. (2022). Problematics of the issues concerning development of energy-saving and environmentally efficient technologies of well construction. IOP Conference Series: Earth and Environmental Science, 1049(1), 012031. https://doi.org/10.1088/1755-1315/1049/1/012031.
11.Panchenko, V., Sobko, B., Lotous, V., Vinivitin, D., & Shabatura,V. (2021). Openwork scheduling for steep-grade iron-ore deposits with the help of near-vertical layers. Mining of Mineral Deposits, 15(1), 87-95. https://doi.org/10.33271/mining15.01.087.
12.Bazaluk, O., Ashcheulova, O., Mamaikin, O., Khorolskyi, A., Lozynskyi, V., & Saik, P. (2022). Innovative activities in the sphere of mining process management. Frontiers in Environmental Science, (10), 878977. https://doi.org/10.3389/fenvs.2022.878977.
13. Shcherbakov, P., Sarybayev, N., Tymchenko, S., Moldabayev, S., & Bitimbayev, M. (2021). Mathematical model to optimize drillingand-blasting operations in the process of open-pit hard rock mining. Mining of Mineral Deposits, 15(2), 25-34. https://doi.org/10.33271/mining15.02.025.
14.Symonenko, V.I., Haddad, J.S., Cherniaiev, O.V., Rastsvietaiev,V.O., & Al-Rawashdeh, M.O. (2019). Substantiating Systems of Open-Pit Mining Equipment in the Context of Specific Cost. Journal of The Institution of Engineers (India), Series D, 00(2), 301-305. Retrieved from https://link.springer.com/article/10.1007/s40033-019-00185-2.
15. Bazaluk, O., Rysbekov, K., Nurpeisova, M., Lozynskyi, V., Kyrgizbayeva, G., & Turumbetov, T. (2022). Integrated monitoring for the rock mass state during large-scale subsoil development. Frontiers in Environmental Science, (10), 852591. https://doi.org/10.3389/fenvs.2022.852591.
16.Bondarenko, A.O., Haddad, J.S., Tytov, O.O., & Alfaqs, F. (2021). Complex for processing of rubble wastes of stone dressing. International Review of Mechanical Engineering, 15(1), 44-50. https://doi.org/10.15866/ireme.v15i1.20205.
17.Khomenko, O., Kononenko, M., & Netecha, M. (2016). Industrial research of massif zonal fragmentation around mine workings.Mining Of Mineral Deposits, 10(1), 50-56. http://doi.org/10.15407/mining10.01.050.
18. Medvedieva, O., Semenenko, Y., Blyuss, B., & Skosyriev, V. (2022). Justification of the hydro-mechanical systems operating modes, used for restoring accumulation capacity of tailings storages. IOP Conference Series: Earth and Environmental Science, 970(1). https://doi.org10.1088/1755-1315/970/1/012043.
19. Sobko, B., Haidin, A., Lozhnikov, O., & Jarosz, J. (2019). Method for calculating the groundwater inflow into pit when mining the placer deposits by dredger. E3S Web of Conferences, 123, 01025. https://doi.org/10.1051/e3sconf/201912301025.
20. Blyuss, B., Semenenko, Y., Medvedieva, O., Kyrychko, S., & Karatayev, A. (2020). Parameters determination of hydromechanization technologies for the dumps development as technogenic deposits. Mining of Mineral Deposits, 14(1), 51-61. https://doi:10.33271/mining14.01.051.
Newer news items:
- Improvement of the safe work system - 25/12/2022 02:37
- Impact of digital maturity on sustainable development effects in energy sector in the condition of Industry 4.0 - 25/12/2022 02:37
- Influence of misalignment of connection of electrical machine shafts on the nature of electric power of the induction motor - 25/12/2022 02:37
- Determination of the deformation parameters of the steel reinforcing phase inside the aluminum matrix during hot rolling - 25/12/2022 02:37
- Minimization of dynamic changes in the tension of long products behind the outlet cage in rolling stock production in coils - 25/12/2022 02:37
- Approximation of blades of radial machines with multiparameter family of smooth surfaces - 25/12/2022 02:37
- The influence of fissured material on tunnel stability (a numerical study) - 25/12/2022 02:37
- Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process - 25/12/2022 02:37
- Numerical study on deformation around underground mining structures (Algeria) - 25/12/2022 02:37
- Substantiation of research results on energy efficiency of basalt crushing - 25/12/2022 02:37
Older news items:
- Determining the parameters of stratification cavity in rock mass to extract mine methane - 25/12/2022 02:37
- Haul road condition impact on tire life of mining dump truck - 25/12/2022 02:37
- Mathematical modeling the quarry wall stability under conditions of heavily jointed rocks - 25/12/2022 02:37
- Energy efficient technologies for the mining industry - 25/12/2022 02:37
- Technology of an open pit refinement under limit stability of sides - 25/12/2022 02:37