Energy efficient technologies for the mining industry

User Rating:  / 0
PoorBest 

Authors:


Yu.O.Zhulai*, orcid.org/0000-0001-7477-2028, Institute of Transport Systems and Technologies of the National Academy of Sciences of Ukraine, Dnipro, Ukraine, e-mail: zhulay@westa

D.D.Zahovailova, orcid.org/0000-0002-2388-3155, Communal Institution of Chemical and Ecological lyceum, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


повний текст / full article



Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (6): 011 - 017

https://doi.org/10.33271/nvngu/2022-6/011



Abstract:


The cavitation generator of fluid pressure oscillations is a promising device for productivity and efficiency improvement in the mining industry (hereinafter referred to as the generator). Due to the periodic growth, separation and collapse of cavitation cavities into generator volume, shock pressure oscillations are realized with a frequency range from 1 to 20 kHz. Oscillatory pressure peak values are up by 4 times higher than the steady-state pressure at the generator inlet. The destroyed rock takes on a fatigue character under repeated alternating effects of force impulses. Due to the development of a network of microcracks in the rock, the discontinuity of the rock mass occurs at stresses lower than the rock ultimate strength. This leads to an increase in the rate of penetration, high-quality disintegration of well productive zones and an increase in their production rate, as well as to effective loosening and degassing of outburst-prone coal seams.


Purpose.
To conduct a systematic analysis of the use of a cavitation generator in the mining industry and evaluate its effectiveness. To develop a simplified method for calculating the maximum values of the range of fluid pressure oscillations by the generator.


Methodology.
The techniques are based on the study of recent research and publications on the use of the generator as a means of impulse action, and on the processing of on its dynamic parameters experimental data.


Findings.
The results are given in the form of the main parameters that determine the efficiency of technological processes with hydro pulse exposure. The calculation dependences of values are presented of the cavitation parameter for which of the maximum levels of the fluid oscillation are implemented on the injection pressure and those of the maximum values of the range of fluctuations on the cavitation parameter.


Originality.
It has been established that the use of the generator as a means of impulse action intensifies the mining industrys technological processes and leads to a significant reduction in specific energy consumption. A new simplified method for calculating the maximum level of the oscillation range has been developed, which makes it possible to determine the rational operation modes of the generator.


Practical value.
At the stage of designing new equipment or upgrading existing equipment, this simplified method allows determining the effective mode of operation of the generator by engineering methods to reduce the specific energy consumption of the technological process.



Keywords:
energy-efficient technologies, cavitation generator, fluid pressure oscillations, periodically stalled cavitation, hydro pulse effect

References.


1. Manko, I., Kozlovskyi, Ye., Kozlovskyi, M., Semkiv, O., & Aleksashyna, N. (2014). The drilling rig for the well drilling. Patent UA No.105937.

2. Manko, I., Kozlovskyi, Ye., Kozlovskyi, M., & Aleksashyna, N. (2015). Method of pulse treatment of productive formations and well filters. Patent UA No. 108764.

3. Krukovskyi, O., Zberovskyi, V., Petukh, O., Agaev, R., Pritula, D., Krivoruchko, O., Pazinich, A., & Kiva, M. (2021). Method of hydropulse loosening of coal seams. Patent UA No. 149830.

4. Gorodilov, L. (2018). On effectiveness of borehole drilling by downhole hydraulic tools, Journal Interexpogeosibir, (5), 325-332. https://doi.org/10.18303/2618-981X-2018-5-325-332.

5. Gorodilov, L. (2018). Analysis of the dynamics and characteristics of the main classes of volume type self-oscillating hydroshock systems. Problems of Mechanical Engineering and Machine Reliability, (1), 22-30.

6. Chen, X., Yang, J., & Gao, D. (2018). Drilling Performance Optimization Based on Mechanical Specific Energy Technologies. https://doi.org/10.5772/intechopen.75827.

7. Nikolayev, O., Zhulay, Yu., Kvasha, Yu., & Dzoz, N. (2020). Evaluation of the vibration accelerations of drill bit for the well rotative-vibration drilling using the cavitation hydrovibrator. International Journal of Mining and Mineral Engineering (IJMME), (11-2), 102-120. https://doi.org/10.1504/IJMME.2020.108643.

8. Temizel, C., Betancourt, D.J., Tiwari, A., Zhang, M., Aktas, S.S., & Quiros, F. (2018). Optimization of Enhanced Coalbed Methane Recovery With CO2. InjectionPaper presented at the SPE Argentina Exploration and Production of Unconventional Resources Symposium, Buenos Aires, Argentina, June 2016. https://doi.org/10.2118/180973-MS.

9. Kewen, P., Gensheng, Li, Shouceng, T., Zhongwei, H., Zhenxiang,Z., Bin, Z., & Xiaokang, N. (2018). Triggering Cavitation in Multilateral Coiled Tubing Drilling by High Pressure Water Jet. Society of Petroleum Engineer. https://doi.org/10.2118/186380-MS.

10. Zberovskyi, V. (2019). Control of the mud pulse method the loosening of coal layers by amplitude-frequency recommendation of acoustic signal by the APSS-1 system. E3S Web of Conferences, 109, 00122. https://doi.org/10.1051/e3sconf/201910900122.

11. Zberovskyi, V., Sofiiskyi, K., Stasevych, R., Pazynych, A., Pinka,Ja., & Sidorova, M. (2020). The results of monitoring of hydroimpulsive disintegration of outburst-prone coal seams using ZUA-98 system. II International Conference Essays of Mining Science and Practice (Dnipro, Ukraine, 06 May, 2020) E3S Web of Conferences, 168, 00068. https://doi.org/10.1051/e3sconf/ 202016800068.

12. Zhulay, Yu., Kvasha, Yu., & Nikolayev, D. (2018). Comparative analysis of methods of computation of amplitude of pressure oscillations created by the cavitational generator. Aerospace technic and technology, KhAI, (3-147), 58-68. Retrieved from http://nbuv.gov.ua/UJRN/aktit_2018_3_10.

13. Kewen, P., Shouceng, T., Gensheng, LI, Zhongwei, H., Ruiyu,Ya., & Zhaoguan, G. (2018). Bubble dynamics characteristics and influencing factors on the cavitation collapse intensity for self-resonating cavitating jets. Petroleum Exploration and Development, (45), 343-350.

 

Visitors

6231071
Today
This Month
All days
4903
57748
6231071

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Cooperation Invitation to cooperation EngCat Archive 2022 Content №6 2022 Energy efficient technologies for the mining industry