Науковий вісник НГУ

Phenomena and mechanism of slagging and corrosion in energy use of coal with a high content of salts

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №5 2022

Last Updated on 30 October 2022

Published on 30 November -0001

Hits: 2519

Authors:

T.G.Shendrik, orcid.org/0000-0001-6629-6471, L.M.Litvinenko Institute of Physical-Organic Chemistry and Coal Chemistry of the NAS of Ukraine, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

N.I.Dunayevska, orcid.org/0000-0003-3271-8204, Institute of Thermal Energy Technologies of the NAS of Ukraine, Kyiv, Ukraine, -mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.I.Fateyev, orcid.org/0000-0003-4129-3703, Institute of Thermal Energy Technologies of the NAS of Ukraine, Kyiv, Ukraine, -mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.K.Tsaryuk, orcid.org/0000-0002-5762-5584, E.O.Paton Electric Welding Institute of the NAS of Ukraine, Kyiv, Ukraine, -mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.P.Yelahin, orcid.org/0000-0002-4335-5130, E.O.Paton Electric Welding Institute of the NAS of Ukraine, Kyiv, Ukraine, -mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (5): 012 - 019

https://doi.org/10.33271/nvngu/2022-5/012

Abstract:

Purpose. Determination of the main mechanisms of slagging and corrosion of heating surfaces when using coal or other raw materials with a high content of alkali and alkaline earth metals. Experimental determination of mineral phases of ash residues of burning composite raw materials with the participation of salty coal and the influence of component composition on the formation of refractory compounds.

Methodology. Critical analysis and generalization of achievements in the developed theories of slagging and corrosion of surfaces during the combustion of problematic carbon raw materials (salty coal, biomass, some wastes, etc.). Determination of the main approaches to the problem of using coal with a high pollution factor. Selection of objects of experimental study on composite raw materials, including coal of different degrees of metamorphism and salinity. Identification of minerals of ash residues of individual fuels and their blends using X-ray phase analysis (X-ray diffraction). Semi-quantitative phase analysis of diffractograms was performed using MATCH! software.

Findings. Modern views on the causes of slagging and corrosion processes during the combustion of fuel with a high salt content are highlighted. It has been determined that the process of intensive slagging is associated with a certain ratio of sodium, calcium and iron compounds. The composition and features of the mineral phases of ash residues of composite fuel with the participation of salty coal are experimentally established. The influence of the content of components on the formation of certain mineral phases of mixed ash was determined.

Originality. For the first time, the prospects of using two-component blended fuel with the participation of Ukrainian salty coal have been studied. The analysis of minerals in ash residues of salty coal and its blends was carried out. It has been determined that the main part of Na in ash of salty coal of the Bohdanivske deposit in the Northern Donbas is in the form of sulfates and silicates. For the first time, the composition and ways of formation of new refractory mineral compounds in the ash formed during the combustion of composite fuel from coal of different metamorphism and salinity have been established.

Practical value. Based on the analysis of literary sources and conducted studies, the dependence of the ash composition on the minerals of the initial fuel and on the ratio of various components in the blends was determined. The proposed approach has a predictive power, as it allows predicting the formation of the main refractory ash minerals. The expediency and prospects of involving salty coal in the fuel base of Ukraine as a component of blended fuels are shown.

Keywords: salty coal, combustion, slagging, surface corrosion, blends, ash minerals

References.

1. Energy Strategy of Ukraine for the period up to 2035 Security, Energy Efficiency, Competitiveness (n.d.). Retrieved from https://razumkov.org.ua/uploads/article/2018_Energy_Strategy_2035.pdf.

2. Ivanova, A.V. (2020). High-chlorine coal as a deferred demand product. Geological Journal, 4(373), 34-42. https://doi.org/10.30836/igs.1025-6814.2020.4.206734.

3. Chernyavsky, M.V., Provalov, O.Yu., Kosyachkov, O., & Bestsennyy, I.V. (2021). Scientific bases, experience of production and combustion of coal mixtures at thermal power plants of Ukraine. Procedia Environmental ScienceEngineering and Management, (8), 23-31.

4. Gavrilov, A.F., & Malkin, B.M. (1980). Pollution and cleaning of heating surfaces of boiler plants. Moscow: Energiya. Retrieved from https://de.ua1lib.org/book/2450607/cee44b.

5. Beletskyy,V.S., Pogidaev,S.D., Kheloufi,A., & Sergeev, P.V. (1998). Perspectives of development salty coals of Ukraine. Donetsk: Don. STU. Retrieved from https://www.donmining.info/2018/11/perspektivyi-osvoeniya-solenyih-ugley-ukrainyi.html.

6. Dunaevska, N.I., Korchevoj, Yu.P., Tuz, V.O., & Neilo, R.V. (2011). Ukraines salty coal. State and ways of using. Energy: economics, technology, ecology, (1), 16-22.

7. Ots, A.A. (1977). Processes in steam generators during combustion of shales and Kansk-Achinsk coals. Moscow: Energiya.

8. Cutler, A.J.B., Halstead, W.D., & Laxtone, I.W. (1971). The Role of Chloride in the Corrosion Caused by Flue Gases and Their Deposits. Transactions, Series A, (3), 105-116. https://doi.org/10.1115/1.3445580.

9. Lees, D.G., & Whitehead, M.E. (1983). Microanalysis of Scales and deposits Formed on Corroding Furnace Tubes in Coal Fired Boilers. Corrosion Resistant Materials for Coal Conversion Systems, London New-York, Conference, 63-86.

10. Niemi, J., Lindberg, D., Engblom, M., & Hupa, M. (2017). Simultaneous melt and vapor induced ash deposit aging mechanisms Mathematical model and experimental observations.Chemical Engineering Science, (173), 196-207. https://doi.org/10.1016/j.ces.2017.07.041.

11. Ershov, Yu.B., Meshcheryakov, V.G., & Enyakin, Yu.P. (1992). Formation of Hydrogen Chloride in Pulverized Coal Flare During Combustion of Coal with High Content of Chlorine. Thermal Engineering, 39(7), 61-64.

12. Alam, M.T., Dai, B., Wu, X., Hoadley, A., & Zhang, L. (2020). Acritical review of ash slagging mechanisms and viscosity measurement for low-rank coal and bio-slags. Frontiers in Energy, 15,46-67. https://doi.org/10.1007/s11708-020-0807-8.

13. Fateyev, A.I., Shendrik, T.G., Polishchuk, S.S., & Dunayevska,N.I. (2018). The energy technological background of involving salty coals into energy balance of Ukraine. 1.Composition of water extracts and the prospects for their utilization. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 40-47. https://doi.org/10.29202/nvngu/2018/8.

14. Baxter, L.L. (1993). Ash deposition during biomass and coal combustion: a mechanistic approach. Biomass and Bioenergy, 4(2), 85-102. https://doi.org/10.1016/0961-9534(93)90031-X.

15. Zhang, X., Zhang, H., & Na, Y. (2015). Transformation of Sodium during the Ashing of Zhundong Coal. Procedia Engineering, 102, 305-314. https://doi.org/10.1016/j.proeng.2015.01.147.

16. Song, G., Qi, X., Yang, S., & Yang, Z. (2018). Investigation of ash deposition and corrosion during circulating fluidized bed combustion of high-sodium, high-chlorine Xinjiang lignite. Fuel. 214, 207-214. https://doi.org/10.1016/j.fuel.2017.11.011.

17. Wang, X., Xu, Z., Wei, B., Zhang, L., Tan, H., Yang, T., , & Dui, N. (2015). The ash deposition mechanism in boilers burning Zhundong coal with high contents of sodium and calcium: A study from ash evaporating to condensing. Applied Thermal Engineering, 80, 150-159. https://doi.org/10.1016/j.applthermaleng.2015.01.051.

18. Yu, D., Wu, J., Yu, X., Lei, Y., & Xu, M. (2017). On cofiring as a strategy to mitigate ash deposition during combustion of a high-alkali Xinjiang coal. 8^th Intemational Conference on Clean Coal Technologies, Cagliari, Italy, 8-12, May 2017. Retrieved from https://www.sustainable-carbon.org/workshop/cct-2017.

19. Wu, X., Zhang, X., Yan, K., Chen, N., Zhang, J., Xu, X., , & Zhang, L. (2016). Ash deposition and slagging behavior of Chinese Xinjiang high-alkali coal in 3 MW_th pilot-scale combustion test. Fuel, 181, 1191-1202. https://doi.org/10.1016/j.fuel.2016.03.069.

20. Shendrik, T.G., Simonova, V.V., & Dedovets, D.I. (2010). Reasons for furnace ash coolers slagging of CFB boiler Starobashevo HPS at burning anthracite culm and slurry. Ecology and Industry, (3), 64-68.

21. Lebedeva, L.N., Kortsenshtein, N.M., & Samuilov, E.V. (2014). Thermodynamic assessment of the possibility of emission of submicron particles in the process of coal combustion. Thermal Engineering, (61), 911-916. https://doi.org/10.1134/S0040601514120052.

22. Ruan, R., Tan, H., Wang, X., Li, Y., Li, S., Hu, Z., , & Yang, T. (2018). Characteristics of fine particulate matter formation during combustion of lignite riched in AAEM (alkali and alkaline earth metals) and sulfur. Fuel, 211, 206-213. https://doi.org/10.1016/j.fuel.2017.08.114.

23. Wieck-Hansen, K., Overgaard, P., & Larsen, O.H. (2000). Coring coal and straw in a 150 MWe power boiler experiences. Biomass and Bioenergy, 19(6), 395-409. https://doi.org/10.1016/S0961-9534(00)00051-9.

24. Baker, D.W. (1975). The Control of High Temperature Fireside Corrosion. CEGB report, 281-302.

25. Weadowcroft, D.B. (1988). An Introduction to Fireside Corrossion Experience in the Central Electricity Generating Board. Materials and Corrosion, (39), 45-48. https://doi.org/10.1002/maco.19880390203.

26. Brencker, H., & Swoboda, E. (1985). Problem bei der Verfenerung sairhalltinger Braun kohlen [in German]. VGB Kraftwerkstechnik, (5), 487-498.

27. Gluskoter, H.J., & Rees, O.W. (1964). Chlorine in Illinois coal. Illinois State Geological Survey Circular, 372. Retrieved from https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.579.79&rep=rep1&type=pdf.

28. Krause, H.H. (1986). High Temperature Corrosion Problems in Waste Inceneration Systems. Journal Materials for Energy Systems, (7), 322-332. https://doi.org/10.1007/BF02833571.

29. Shendrik, T., Dunayevska, N., Tsaryuk, A., Yelahin, V., & Fateyev, A. (2020). Experimental development of approaches to reduce the slagging and corrosive activity of salty coal. Eastern European Magazine of Advanced Technologies, 6(108), 124-133. https://doi.org/10.15587/1729-4061.2020.217585.

30. Zhang, J.-L., & Hong, G.-Y. (2017). Nonstoichiometric Compounds. In R. Xu, & Y. Xu (Eds.). Modern Inorganic Synthetic Chemistry, (pp. 329-354). https://doi.org/10.1016/B978-0-444-63591-4.00013-6.

31. Wei, B., Wang, X., Tan, H., Zhang, L., Wang, Y., & Wang, Z. (2016). Effect of siliconaluminum additives on ash fusion and ash mineral conversion of Xinjiang high-sodium coal. Fuel, 181, 1224-1229. https://doi.org/10.1016/j.fuel.2016.02.072.

32. George, S.M., Haycock, P.W., & Ormerod, R.M. (2018). The Mechanism of Corrosion of Aluminium Zirconium Silicate (AZS) material in the Float Glass Furnace Regenerator. Journal of The European Ceramic Society, 38(4), 2202-2209. https://doi.org/10.1016/j.jeurceramsoc.2017.12.006.

33. Fateiev, A.I., Krut, O.A., Dunaievska, N.I., & Nekhamin, M.M. (2016). Method of salty coal enrichment. Ukrainian Patent No. 116778 UA.

• < Prev
• Next >