Науковий вісник НГУ

Mathematical model of heat processes in terms of gas-saturated rock breaking by means of shearers and tunneling machines

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №1 2020

Last Updated on 09 April 2020

Published on 10 March 2020

Hits: 2892

Authors:

Ya. Ya. Lebediev, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0002-2992-2581, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.V.Stolbchenko, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0003-2003-4382, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

А.А.Yurchenko, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0002-6074-0145, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

I.O.Luts, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0003-0333-5730, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.V.Kovbasa, “ShU Pershotravenske”, “DTEK Pavlohradvuhillia” PJSC, Pershotravensk, Ukraine

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2020, (1):18-24
https://doi.org/10.33271/nvngu/2020-1/018

 повний текст / full article

Abstract:

Purpose. To evaluate the effect of mining and technical factors on friction combustion of methane-air mixtures on the basis of a mathematical model of heat processes while breaking gas-saturated rock mass using shearers and tunneling machines.

Methodology. To achieve the objective, methods of physical and mathematical modeling have been applied to study heat flow in terms of friction interaction of the cutters of a shearer’s working organ and to analyze the process of friction spark formation under real conditions of gas-saturated rock mass breaking.

Findings. The research shows that heat flow from the incandescent friction site while rock mass breaking by shearer’s working organ is 1.027 mJ; that exceeds the minimal energy of methane-air mixture combustion (0.28 mJ) by almost 4 times. In terms of critical temperature of methane combustion, that is more than two-fold excess. A process of friction spark formation has been analyzed. It has been defined that only friction sparks of up to 60 mcm, which do not have the energy sufficient to inflame the methane-air medium, are not hazardous. The rest of friction particles, struck by the shearer’s working organ, are fire- and explosion hazardous within the velocity range of more than 0.5 m/s.

Originality. Analytic expressions have been obtained to calculate the energy transferred by a friction spark to the dust-methane-air mixture depending on its spark diameter and velocity.

Practical value. Methodology to calculate heat flow in terms of friction interaction has been developed; the methodology helps calculate heat flow from the incandescent friction site under real conditions of gas-saturated rock mass breaking. Methodology to evaluate ignition properties of friction sparks has been elaborated making it possible to calculate values of the parameters of friction sparks and energy transferred by a friction particle to the combustion medium within the period of cooling from the initial temperature down to the temperature of the medium self-ignition. Comparing the obtained values of temperature and energy with the temperature of medium self-ignition and minimal energy of hazardous medium combustion, it is possible to conclude on the spark hazard of the materials and, consequently, to develop preventive measures to limit the use of such materials in real technological processes.

References.

1. Khalimendik, Yu. М., Baryshnikov, А. S., & Khalimendik, V. Yu. (2016). Safe use of lock joints of arc flexible support. Geotechnical mechanics, (128), 61-69.

2. Golinko, V. I., Yavorskii, A. V., Lebedev, Ya. Ya., & Yavorskaia, Ye. А. (2014). Effect of the parameters of gas-saturated breaking upon its heat exchange with the methane-air. Geotechnical mechanics, (117), 161-175.

3. Botvenko, D. V., Kazantsev, V. G., Sazonov, М. S., & Vysotskii, V. V. (2014). On possibility of methane-air mixture inflammation from piezoelectric rock effect. Fire and industrial safety, (1), 96-98.

4. Struchalin, V. G., Ponomariov, V. М., & Navtsenia, V. Yu. (2014). Possible accidents while filling rail tank cars with highly flammable liquids. Science and technology of transport, 4(44), 85-90.

5. Merzliakov, V. G., & Dereviashkin, I. V. (2015). Developing measures to prevent methane and coal dust combustion during operation of shearers and tunneling machines. Fire and explosion safety, 24(4), 39-46.

6. Kolesnichenko, I. Ye., Artemiev, V. B., Kolesnichenko, Ye. А., Cherechukin, V. G., & Liubomichenko, Ye. I. (2016). Theory of combustion and explosion of methane and coal dust. Coal, (6), 30-35. https://doi.org/10.18796/0041-5790-2016-6-30-35.

7. Prokopenko, S. А., & Ludzish, V. S. (2015). Evolution of cutter structures for shearers. Mining industry, 2(120), 65-66.

8. Gorev, V. А., & Fomina, М. V. (2016). Simplified calculation of heat exchange on plane surfaces. Fire and explosion safety, 25(3), 5-14. https://doi.org/10.18322/PVB.2016.25.03.5-14.

9. Yemelianov, R. Т., Turysheva, Ye. S., Pylaiev, М. А., & Khodzhaieva, М. М. (2015). Studying a process of heat transfer within the limited space. Vestnik of KrasSAU, (6), 73-78.

10. Kudinov, V. А., Kudinov, I. V., & Skvortsova, М. P. (2015). Generalized functions and additional boundary conditions in the problems of heat conductivity for multilayered bodies. Journal of computational mathematics and mathematical phy­sics, 55(4), 669-680.

11. Vasiliev, А. А., Pinaiev, А. V., Trotsiuk, А. V., Fomin, P. А., Trubitsyn, А. А., & Trubitsyna, D. А. (2015). Complete suppressing of detonation and combustion of methane mixtures by means of dust haze. Fire and industrial safety, (4), 12-21.

• < Prev
• Next >