Influence of dynamic processes in mine hoists on safety of exploitation of shafts with broken geometry

User Rating:  / 0
PoorBest 

Authors:

S.R.Ilin, Cand. Sc. (Tech.), Senior Research Fellow, Institute of geotechnical mechanics named by N.S.Polyakov NAS of Ukraine, Dnipropetrovsk, Ukraine, e-mail: iljin_sr@ mail.ru

V.I.Samusia, Dr. Sc. (Tech.), Prof., State Higher Educational Institution “National Mining University”, Dnipropetrovsk, Ukraine

I.S.Ilina, Cand. Sc. (Tech.), Assoc. Prof., State Higher Educational Institution “National Mining University”, Dnipropetrovsk, Ukraine

S.S.Ilina, Cand. Sc. (Tech.), State Higher Educational Institution “National Mining University”, Dnipropetrovsk, Ukraine

Abstract:

Purpose. The substantiation of diagnostics methodology for technical state of reinforcement in vertical shafts with broken geometry and renewal of the exploitation safety of mine winding plants.

Methodology. Relationship between parameters technical state of the system elements and parameters of exploitation safety of mine winding plants is established. Methods of instrumental measurement and calculation of the system diagnostics parameters are substantiated.

Findings. The methods of choosing maintenance and repair operations and correcting operating parameters of system elements, providing safe exploitation of mine winding plants in shafts with broken geometry in the specified technological modes, are grounded.

Originality. The article specifies the dependence of dynamic parameters which determine the risk of emergency danger on the parameters of the technical state of separate links of winding plant In the article on the base of complex research studies, regarding the structure of the mine winding plant as an iterative, multimass discrete-continual system with plural deviations of operating parameters from the legitimate project values. On the base of findings the methodology of the instrumental diagnostics of the system in the operating mode and the emergency braking mode, as well as methods of reducing emergency danger level while increasing the plant work intensity are grounded.

Practical value. The methods of apparatus control and determination of diagnostic parameters of winding plants under production conditions, methods of targeted choice of repair operations providing transition of plants from the potentially dangerous operating state into safe technical state are grounded.

 

References / Список літератури

1. Ilin, S.R., 2008. Development and validation of the general diagnostic model of the equipment of mine winding plant. Geo-Technical Mechanics, No. 76, pp. 44–63.

Ильин С.Р. Разработка и обоснование общей диагностической модели оборудования шахтных подъемных установок / С.Р.Ильин // Геотехническая механика: Сб. науч. тр. ИГТМ НАН Украины. – Днепропетровск, 2008. – Вып. 76. – С. 44–63.

2. Vorobel, S.V., 2007. Dynamic examination of hard reinforcement of mine shafts. In Vorobel, S.V., Trifanov, G.D., Kniazev, A.A., Problems of complex de-ve lopment of mineral deposits in Perm region. 2007, Perm: PSTU, pp. 195–201.

Воробель С.В. Динамическое обследование жёсткой армировки шахтных стволов: материалы краевой научнотехнической конференции студентов, аспирантов и молодых учёных / С.В.Воробель, Г.Д.Трифанов, А.А.Князев // Проблемы комплексного освоения месторождений полезных ископаемых в Пермском крае. – Пермь: Изд во ПГТУ, 2007. – С. 195–201.

3. Vorobel, S.V., Trifanov, G.D., 2011. Influence of speed diagram on dynamic loadings in the “lifting vessel – straight reinforcement” system and deformation of lifting vessel frame. Mining equipment and elec- tromechanics, No. 12, pp. 16–19.

Воробель С.В. Влияние диаграммы скорости на динамические нагрузки в системеподъёмный сосуджесткая армировкаи деформацию рамы подъёмного сосуда / С.В.Воробель, Г.Д.Трифанов // Горное оборудование и электромеханика. – М., 2011. – № 12. – С. 16–19.

4. Samusia, S.V., 2011. Substantiation of rational parameters and modes of operation of rescue mobile hoisting plants, PhD. IGTM NAS of Ukraine.

Самуся С.В. Обоснование рациональных параметров и режимов эксплуатации аварийноспасательных мобильных подъемных установок: автореф. дис. на соискан. научной степ. канд. техн. наук / С.В.Самуся // ІГТМ НАН України ім. ПоляковаДнепропетровск, 2011. – 19 с.

Files:
03_2016_Ilin
Date 2016-07-29 Filesize 880.63 KB Download 816

Visitors

6227549
Today
This Month
All days
1381
54226
6227549

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Archive by issue 2016 Contents No.3 2016 Geotechnical and mining mechanical engineering, machine building Influence of dynamic processes in mine hoists on safety of exploitation of shafts with broken geometry