Research on an eco-safe filtration plant for wastewater treatment made of natural raw materials

User Rating:  / 0
PoorBest 

Authors:


O.R.Byelyanska*, orcid.org/0000-0001-8026-8004, Dniprovskyi State Technical University, Kamianske, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

K.S.Krasnikov, orcid.org/0000-0002-4241-0572, Dniprovskyi State Technical University, Kamianske, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.H.Nakonechnyi, orcid.org/0000-0002-8789-8348, Dniprovskyi State Technical University, Kamianske, Ukraine, е-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


повний текст / full article



Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (5): 128 - 133

https://doi.org/10.33271/nvngu/2023-5/128



Abstract:



Purpose.
To develop a new eco-safe filtration plant for wastewater treatment based on natural and secondary raw materials, which will allow rational use of natural resources with further mathematical modeling of hydrodynamics of mixing treated wastewater in bioponds to predict removal of residual concentrations from the filter.


Methodology.
A complex of modern methods of theoretical and experimental research was used to solve the tasks. Concentration of pollutants was determined using methods of atomic adsorption spectroscopy, titrimetry and gravimetric methods, as well as pyrometric analysis. A laboratory installation was created, which included a receiving tank, a filter column, and a tank for collecting purified wastewater. Prediction of distribution and mixing of treated effluent in bioponds was carried out using mathematical and computer software.


Findings.
An environmentally safe filtration plant (containing sand, fallen leaves of linden, poplar, and plastic residues separated by a polymer mesh) was created to purify wastewater from suspended substances and nitrates. Kinetics of changes in concentration of suspended solids and nitrates in urban wastewater were studied. When using the filtration plant, concentration of suspended solids decreased by 85–92 %. Concentration of nitrates in purified water processed with such a plant is reduced from 12 to 0.25–0.05 mg/dm3. A mathematical model concerning distribution of purified water in a biopond was obtained, which allows predicting possible migration distributions of residual concentrations in purified water during its natural movement downstream.


Originality.
For the first time, influence of the species origin of fallen leaves on the performance indicators of wastewater filtration plant of urban sewage treatment constructions was investigated, which made it possible to substantiate a new way of disposal of this type of waste. For the first time, it was established that wastewater treatment using an eco-safe filtration plant based on natural and secondary raw materials, containing layers of sand, fallen oak, linden, and poplar leaves, gives an opportunity to reduce contents of suspended solids in wastewater by 1.5 times of the maximum permissible concentration; and such treatment also reduces concentration of nitrates by 4 times from the initial level. Pollutants from wastewater are mechanically fixed in pockets (microcracks, cracks) of fallen leaves, formed during drying of leaves, which is explained by hardening of intercellular spaces with formation of a specific geometry of holes. For the first time, mathematical modeling of purified wastewater movement in a biological pond with a complex geometry was performed, which allows estimating the concentration of the pollutant at its outlet from the pond.


Practical value.
The created environmentally safe wastewater filtration plant gives an opportunity to perform not only filtering, but also an effective biological purification of wastewater from nitrates on the surface of layers of fallen leaves. The wide use of the proposed installation will allow attracting plastic of polyethylene bottles used in everyday life as a secondary raw material. Based on the proposed mathematical model of movement of purified liquid containing residual concentrations of pollutants, it is possible to carry out qualitative forecasting and optimization of the process of cascade wastewater treatment at industrial and economic enterprises.



Keywords:
waste water, fallen leaves, pyrometric analysis, filtration, biological cascade ponds

References.


1. Mach, V., Šír, M., & Soroka, M. (2018). Industrial Ukraine: Impact of pollution oninhabitants and the environment in five industrial cities (Report). Retrieved from https://329736450_Impact_of_pollution_on_inhabitants_and_the_environment_in_five_industrial_cities_in_Ukraine.

2.  Boychenko, M. S., Vovk, O. O., Gladysheva, V. A., Boychenko, S. V., & Shamansky, S. Y. (2018). Prospects of a microbiological method of wastewater treatment from bioresistant pharmaceutical products. Science-Based Technologies, 1(31). https://doi.org/10.18372/2310-5461.37.12375.

3. Grigorov, A., Mardupenko, A., Sinkevich, I., Tulskaya, A., & Zelenskyi, O. (2018). Production of boiler and furnace fuels from domestic wastes (polyethylene items). Petroleum & Coal journal, 60(6), 1149-1153.

4. Teoh, S. K., & Li, L. Y. (2020). Feasibility of alternative sewage sludge treatment methods from a lifecycle assessment (LCA) perspective. Journal of Cleaner Production, 247, 119495. https://doi.org/10.1016/j.jclepro.2019.119495.

5.  Mo, Z., Dan Li, D., & She, Q. (2022). Semi-closed reverse osmosis (SCRO): A concise, flexible, and energy-efficient desalination process. Desalination, 544, 116147. https://doi.org/10.1016/j.desal.2022.116147.

6. He, X., Zheng, Z., Ma, M., Su, Y., Yang, J., Tan, H., Wang, Y., & Strnadel, B. (2020). New treatment technology: The use of wet-milling concrete slurry waste to substitute cement. Journal of Cleaner Production, 242, 118347. https://doi.org/10.1016/j.jclepro.2019.118347.

7. Wu, S., Kuschk, P., & Wiessner, A. (2013). Response of Removal Rates to Various Organic Carbon and Ammonium Loads in Laboratory-Scale Constructed Wetlands Treating Artificial Wastewater. Water Environment Research, 85(1), 44-53. https://doi.org/10.2175/106143012X13415215907293.

8.  Bartosovic, M., & Castelo-Branco, G. (2022). Multimodal chromatin profiling using nanobody-based single-cell CUT&Tag. Nature Biotechnology. https://doi.org/10.1038/s41587-022-01535-4.

9. Maletskyi, Z. V. (2012). Championship of pitcher filters. Water and water treatment technologies. Scientific and practical magazine, 4(64), 4-15.

10. Mitchenko, T. Ye. (2019). Series of publications “The world of modern water treatment”. Methods and materials. Kyiv: BYBT Waternet. SBN 978-966-97940-2-4.

11. Belyanska, O. R., & Antareva, Yu. V. (2021). Research on the process of processing liquid waste of urea production using a biofilter. Collection of scientific works of the Dnipro State Technical University (technical sciences), 2(39), 125-133. https://doi.org/10.31319/2519-2884.39.2021.14.

12.  Eliche-Quesada, D., Ruiz-Molina, S., Pérez-Villarejo, L., Eulogio Castro, E., & Sánchez-Soto, P.J. (2020). Dust filter of secondary aluminium industry as raw material of geopolymer foams. Journal of Building Engineering, 32, 101656. https://doi.org/10.1016/j.jobe.2020.101656.

13. Diakonov, V. I., Buzina, I. M., & Khainus, D. D. (2020). Ecological methods of disposal of fallen leaves and plant waste. Taurida Scientific Herald, 111, 258-264. https://doi.org/10.32851/2226-0099.2020.111.35.

14. Soroka, M. L., & Yaryshkina, L. A. (2012). Environmental assessment of seasonal municipal waste based on fallen leaves in green areas of the city of Dnipropetrovsk. Collection of scientific works of the National Mining University, 38, 183-192. Retrieved from http://nbuv.gov.ua/UJRN/znpngu_2012_38_29.

15. Skip, O. S., Butsiak, A. A., Havryliak, V. V., Shved, O. V., & Butsiak, V. I. (2018). Alternative use of fallen leaf substrates in vermiculture. Chemistry, technology of substances and their application. CTAS. 1(2), 74-79. https://doi.org/10.23939/ctas2018.02.074.

16. Soroka, M. L., Zelenko, Yu. V., & Yaryshkina, L. O. (2012). Study on the operational properties of the sorbent for the elimination of emergency and technological emissions of petroleum products and hydrocarbons in transport. Bulletin of the National Shipbuilding University: Technogenic safety, 3, 233-237. Retrieved from http://evn.nuos.edu.ua/article/view/23014.

17.  Terrazas-Nájera, C. A., Romero, A., Felice, R., & Wicker, R. (2023). Multi-wavelength pyrometry as an in situ diagnostic tool in metal additive manufacturing: Detecting sintering and liquid phase transitions in electron beam powder bed fusion. Additive Manufacturing, 63, 1-14. https://doi.org/10.1016/j.addma.2023.103404.

18. Othman, S. Q., Ahmed, A. H., & Mohammed, S. I. (2023). Natural radioactivity and radiological risk assessment due to building materials commonly used in Erbil city, Kurdistan region, Iraq. Environmental Monitoring and Assessment, 195, 140. https://doi.org/10.1007/s10661-022-10745-x.

19. Savelyeva, M. V., & Gudz’, Yu. V. (2022). Factors of the psychological status in victims of radiation accidents, which mitigate development of psychosomatic disorders in the long term. Medicо-Biological and Socio-Psychological Problems of Safety in Emergency Situations, (1), 117-125. https://doi.org/10.25016/2541-7487-2022-0-1-117-125.

20. Maksimova, N. M., & Makarova, T. K. (2020). Assessment of the risk of an accident and calculation of the process of destruction of the soil dam of the tailings storage facility. Communal management of cities, 3(156), 99-104. https://doi.org/10.33042/2522-1809-2020-3-156-99-104.

21. Ahmadini, A., Msmali, A., Mutum, Z., & Raghav, Y. S. (2022). The Mathematical Modeling Approach for the Wastewater Treatment Process in Saudi Arabia during COVID-19 Pandemic. Discrete Dynamics in Nature and Society. https://doi.org/10.1155/2022/1061179.

22. del Castillo, A. F., Garibay, M. V., Senés-Guerrero, C., Carlos Yebra-Montes, C., de Anda, J., & Gradilla-Hernández, M. S. (2020). Mathematical Modeling of a Domestic Wastewater Treatment System Combining a Septic Tank, an Up Flow Anaerobic Filter, and a Constructed Wetland. Water, 12(11), 3019. https://doi.org/10.3390/w12113019.

23. Dariusz, M., Bugajski, P., & Młyńska, A. (2019). Application of the Mathematical Simulation Methods for the Assessment of the Wastewater Treatment Plant Operation Work Reliability. Water, 11(5), 873. https://doi.org/10.3390/w11050873.

24. Gohary, R. El., & Sánchez, J. (Reviewing Ed.) (2020). Low-cost natural wastewater treatment technologies in rural communities using Instream Wetland, Moringa Oleifera, and Aeration Weirs – A comparative study. Cogent Engineering, 7(1). https://doi.org/10.1080/23311916.2020.1846244.

25. Meister, M., & Wolfgang, R. (2015). Wastewater treatment modeling with smoothed particle hydrodynamics. Environmental modeling and software, 75, 206-211. https://doi.org/10.1016/j.envsoft.2015.10.010.

26. Zhang, C., Zhu, Y-J., Wu, D., Adams, N.A., & Hu, X. (2022). Smoothed particle hydrodynamics: Methodology development and recent achievement. Journal of Hydrodynamics, 34, 767-805. https://doi.org/10.1007/s42241-022-0052-1.

 

Visitors

7564607
Today
This Month
All days
3889
87093
7564607

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Publication ethics EngCat Archive 2023 Content №5 2023 Research on an eco-safe filtration plant for wastewater treatment made of natural raw materials