Water resistance of structured sand-sodium-silicate mixtures
/ 0
- Details
- Category: Content №4 2021
- Last Updated on 23 August 2021
- Published on 30 November -0001
- Hits: 5834
Authors:
L.I.Solonenko, orcid.org/0000-0003-2092-8044, Odesa Polytechnic State University, Odesa, Ukraine, -mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
S.I.Repiakh, orcid.org/0000-0003-0203-4135, National Metallurgical Academy of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
K.I.Uzlov, orcid.org/0000-0003-0744-9890, National Metallurgical Academy of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
I.Mamuzich, orcid.org/0000-0002-7968-7540, University of Zagreb, Croatian Metallurgical Society, Zagreb, the Republic of Croatia, -mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.P.Bilyi, orcid.org/0000-0003-1234-5404, National Metallurgical Academy of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
T.V.Kimstach, orcid.org/0000-0002-8993-201X, National Metallurgical Academy of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (4): 041 - 046
https://doi.org/10.33271/nvngu/2021-4/041
Abstract:
Purpose. To establish regularities of changes in sand-sodium-silicate mixtures (SSSM) relative water resistance, structured by steam-microwave solidification method (SMS), on their structuring parameters and sodium silicate solute (SSS) dissolution conditions.
Methodology. Technical purity water, SSS with 2.83.0 silicate modulus, quartz sand with 0.23 mm average particle size were used in this work. Studies were carried out on quartz sand samples, which were preliminarily cladded with 0.52.5% (by weight) SSS and structured by SMS method. The fracture time of structured mixtures was evaluated on cubic specimens with 20 mm rib length, which were immersed in water at different temperatures.
Findings. Changes in SSSM water resistance in water regularities depending on their manufacturing, use and storage conditions were established. Recommendations for SSSM rods removal from castings in water were developed.
Originality. For the first time, it has been established that relative water resistance of the SSSM structured by SMS method decreases along with increase in water temperature in which it is destroyed. Depending on SSS mass used for quartz sand cladding in range 0.52.5%, water resistance dependence on treatment in steam-microwave environment with 27 minutes running time acquires an inversion character with inversion point `3.1 minutes into the processing.
For the first time, it has been discovered that in boiling water the relative water resistance of SSSM, structured by SMS-process and having preheating, monotonically increases with preheating temperature rising from 100 to 600 , sharply increases when heated to 600700 and practically becomes absolute after preliminarily preheating to higher temperatures.
Practical value. Research results will be useful in concepts of processes accompanying destruction of structured sands with water-soluble binders expanding, as well as in technologies and equipment development designed for SSS rods and mold rests removing from castings.
Keywords:water resistance, sodium silicate solute, sand-sodium-silicate mixture, knockout, steam-microwave solidification, rod
References.
1. Matvienko, A.V. (2019). The use of liquid glass. Science and education, 9(44), 41-42. Retrieved from https://cyberleninka.ru/article/n/primenenie-zhidkogo-stekla/viewer.
2. Kravchenko, N.G., Kozlov, I.A., Shchekin, V.K., & Efimov, E.A. (2021). Compositions of detergents for washing aircraft engines (review). VIAM Proceedings, 1(95), 105-113. https://doi.org/10.18577/2307-6046-2021-0-1-105-113.
3. Zin Min Khtet, & Tikhomirova, I.N. (2017). Thermal insulation materials based on foamed liquid glass. Advances in chemistry and chemical technology, 3, 34-36. Retrieved from https://cyberleninka.ru/article/n/teploizolyatsionnye-materialy-na-osnove-vspenennogo-zhidkogo-stekla/viewe.
4. Vladimirov, S.N., Ermakova, L.S., & Partikeyev, I.A. (2016). Abinder in the technology of briquetting solid household waste. Bulletin of Science and Practice, 5, 145-148. https://doi.org/10.18454/IRJ.2016.48.148.
5. Santana-Carrillo, J.L., Ortega-Zavala, D.E., Burciaga-Daz, O., & Escalante-Garcia, J.I. (2021). Modified blended limestone-Portland cement binders: Evaluation of 4 different sodium silicates. Cement and Concrete Composites, 118, 105-117. https://doi.org/10.1016/j.cemconcomp.2021.103935.
6. Loganina, V.I., & Mazhitov, E.B. (2019). Regularities of the formation of the sol-silicate-paint-substrate adhesive contact. MGSU Bulletin, (1), 94-101. https://doi.org/10.22227/1997-0935.2019.1.94-101.
7. Igosheva, L.A., & Grishina, A.S. (2016). Review of the main methods of strengthening soils with foundations. PNRPU Bulletin. Construction and architecture, (2), 5-21. https://doi.org/10.15593/2224-9826/2016.2.01.
8. Loganina, V.I., Kislitsyna, S.N., & Mazhitov, Y.B. (2018). Development of sol-silicate composition for decoration of building walls. Case Studies in Construction Materials, (9), 1-4. https://doi.org/10.1016/j.cscm.2018.e00173.
9. Vadulina, N.V., Abdrakhmanov, N.Kh., Fedosov A.V., & Badrtdinova, I.I. (2018). Development of a method for recycling waste from mining and processing plants by creating active filtering deironing materials. Bulletin of the Tomsk Polytechnic University. Engineering of georesources, 11, 37-43.
10. Guminsky, Yu.Yu., & Rovin, S.L. (2019). Environmentally friendly liquid glass binder modified with ultrafine materials. Foundry, (3), 41-45. https://doi.org/10.21122 1683-6065-2019-3-41-45.
11. Solonenko, L.I., & Repyakh, S.I. (2020). The taste of food-and-drink sums, which was structured with a steam-microchillo-type stump. Metallurgy and ore industry, (3), 39-47. https://doi.org/10.34185/0543-5749.2020-3-39-47.
12. Leushin, I.O., Koshelev, O.S., Maslov, K.A., & Titov, A.V. (2020). Evaluation of the use of softening additives in the production of casting cores. Bulletin of the Magnitogorsk State Technical University. G.I.Nosov, (3), 25-33. https://doi.org/10.18503/1995-27-32-2020-18-3-25-33.
13. Krutilin, A.N., Guminsky, Yu.Yu., & Rusevich, O.A. (2018). Improving the efficiency of using liquid glass mixtures. Part 3. Nanodispersed materials. Foundry, 3(92), 31-35. https://doi.org/10.21122/1683-6065-2018-92-3-31-35.
14. Mannanov, F.Kh. (2016). Evaluation of the environmental friendliness of foundry technology. Modern materials, equipment and technologies, 5(8), 130-135.
15. Lazarenkov, A.M. (2019). Air study of working areas of foundries. Casting and metallurgy, 2, 138-142. https://doi.org/10.21122/1683-6065-2019-2-138-142.
16. Illarionov, I.E., Strelnikov, I.A., & Korolev, A.V. (2016). On the features of the use of metal phosphate mixtures. Foundry, 6, 5-7.
17. Petrova, N.V. (2016). Prospects for the use of metal phosphate binders for the production of casting molds and cores. Materials of the XIII final scientific and practical conference Innovations in the educational process, 92-95. Retrieved from https://www.elibrary.ru/item.asp?id=37618604.
18. Solonenko, L.I., Usenko, R.V., Uzlov, K.I., Dziubina, A.V., & Repiakh, S.I. (2020). Carbonization and crushability of structured sand-sodium-silicate mixtures. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 40-46. https://doi.org/10.33271/nvngu/2020-5/040.
19. Solonenko, L.I., & Repiakh, S.I. (2020). Ukrainian Patent No.122538, Kyiv: State Patent Office of Ukraine.
20. Bondarenko, V., Svietkina, O., Sai, K., & Klymenko, V. (2018). Investigation of the influence of polyelectrolytes hydrodynamic properties on the hydrateformation process. E3S Web of Conferences, 60, 00007. https://doi.org/10.1051/e3sconf/20186000007.
Newer news items:
- The enterprise capital structure management model - 23/08/2021 18:11
- Knowledge base formation for automation of dispatch control over power systems of the mining and metallurgical complex - 23/08/2021 18:11
- State regulation of environmental safety - 23/08/2021 18:11
- Research into ecological status and the degree of heavy metal concentration in the waters of the Drenica river (Kosovo) - 23/08/2021 18:11
- Recovery of iron and phosphorus removal from Gara Djebilet iron ore (Algeria) - 23/08/2021 18:11
- Analysis of stress in the conveyor belt (Maxwell–element model) - 23/08/2021 18:11
- Investigation of the effect of several parameters on the applicability of magnetic separation method - 23/08/2021 18:11
- Analytical and experimental assessment of screw centrifugal pump at improving its design - 23/08/2021 18:11
- Definition of rational operating modes of a vibratory jaw crusher - 23/08/2021 18:11
- Compound physical and mechanical effects stimulating metastable diamond formation - 23/08/2021 18:11
Older news items:
- Composition and processing of sulphide lead-zinc ores from Chaabet El-Hamra mine (Setif, Algeria) - 23/08/2021 18:11
- Automatic control of jet grinding on the basis of acoustic monitoring of mill operating zones - 23/08/2021 18:11
- Substantiating rational schedule to load trucks using draglines while mining a pit of Motronivskyi MPP - 23/08/2021 18:11
- New methods for preventing crumbling and collapse of the borehole walls - 23/08/2021 18:11
- Development of a methodology for assessing the expediency of mine workings decommissioning based on the geomechanical factor - 23/08/2021 18:11
- A model of the tectonic development of Irtysh shear zone in terms of present day radioisotope data - 23/08/2021 18:11
