Remote mine actuators
/ 0
- Details
- Category: Innovative projects 2011
- Last Updated on 11 October 2012
- Published on 11 October 2012
- Hits: 3678
Authors: Authors: V.V. Tkachev, Dr. Sc. (Techn.), prof. N.I. Stadnik, Dr. Sc. (Techn.), prof., N.V. Kozar, Senior Lecturer, S.N. Protsenko, Senior Lecturer, A.F. Volynskyi, chief designer.
An emergency shutdown sensors and actuators, which are commonly used on underground conveyors, cableways, hoists and other transfer mechanisms are unfit for some requirements of the State standard of Ukraine (ДСТУ ЕN 60204-1: 2004) “Electrical equipment of machines. Part 1: General requirements.” In addition, because of only one contact connection available there is no capability to attach signaling links to these sensors. A brand new actuators of “VDH” series (remote mine actuators) are developed in compliance with up-to-date requirements. Such actuator has two independent switchable contacts and light-emitting diode indication.
Remote mine actuators are designed for mine conveyor automation schemes, surface and aerial conveyors, and all control and alarm systems with spark-safe circuits of level “Ia”. These remote actuators could be manufactured in five different packages using the same design datum.
Overall technical characteristics.
Protection class IP54
Level and form of implosion protection PO, Ia
Electrical circuit 2 swichable contacts
Max contacts voltage, 42 V
Max contact current, 0.2 A
Actuation indicator available
Environment temperature -400 to 500 C
Relative humidity100% by 350 C
Minimal construction unification 90 %
VDH-1. Designed for emergency shutdown of the cargo conveyor at any location along the conveyor with or without fixation of disabled state. It is also designed for local conveyor startup blocking. The distance between actuators is up to 120 meters.
Exposure to drive, N:without fixation 140-180, with fixation 50-80
Linear drive motion in the point of cable exposure, 7 mm
Overall dimensions, 90\150\190 mm
Mass, 1.8 kg
VDH-2. Designed for emergency shutdown of the cargo-and-passenger conveyors at any location along the conveyor, as well as emergency shutdown executed by passenger on the conveyor with fixation of the disabled state. It is also designed for local conveyor startup blocking. Used jointly with draft device with length up to 300 meters.
Max exposure to draft device cable, 50 N
Max cable shift before actuation, 30 mm
Overall dimensions, 90\150\260 mm
Mass, 1.8 kg
VDH-3. Designed for emergency shutdown of the conveyor when conveyor track is descent sideways.
Max linear drive motion before actuation
(in the point of track exposure), 40 mm
Allowable drive curve, up to 900
Overall dimensions, 250\150\390 mm
Mass, 2.3 kg
VDH-4. Designed for emergency shutdown of the conveyor with or without fixation of disabled state when unsanctioned barrage opening or track catchers actuating occurs. It is also can be used as limit switch for positional checking and registration of mobile mechanisms purposes.
Drive deviation angle by actuation, 12-130
Allowable drive curve, up to 900
Overall dimensions, 100\150\500 mm
Mass, 2.3 kg
VDH-5. Designed for emergency shutdown of the conveyor or another mechanism when pouring point blockage of transport traffic flow or excess of allowable material level in bunker occurs.
Drive length (adjustable), 800-1300 mm
Drive deviation angle by actuation, 120
Overall dimensions, 220\220\1450 mm
Mass, 6 kg
These actuators of “VHD” series are patented in Ukraine (№ 2323498 from 24.07.2006) and Russia (№ 72146 from 25.04.2007). They have passed all development stages and deployed in serial production. We have all required certificates and permissions to delf application.
Contacts:
19, K. Marks Ave., Dnepropetrovsk, Ukraine, 49008
National Mining University,
department of automation and computer systems,
Tel./Fax. +38 (0562) 47 39 93
Manufacturer:
“AKS-U”,
Tel./Fax: +38 (0562) 39 75 30 ,
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
The pages from the journal PDF (in Ukrainian)
