Forecasting the technical efficiency of mobile workover rigs
- Details
- Category: Content №5 2022
- Last Updated on 30 October 2022
- Published on 30 November -0001
- Hits: 2350
Authors:
A.M.Buchynskyi, orcid.org/0000-0001-7154-6404, National University Yuri Kondratyuk Poltava Polytechnic, Poltava, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.Ya.Buchynskyi, orcid.org/0000-0001-7529-1680, Expertnaftogas LLC, Poltava, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.I.Vasylchenko, orcid.org/0000-0002-9569-154X, National University Yuri Kondratyuk Poltava Polytechnic, Poltava, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (5): 033 - 038
https://doi.org/10.33271/nvngu/2022-5/033
Abstract:
Purpose. To propose a method of comparative evaluation of technical efficiency of mobile workover rig by the criterion of life cycle cost.
Methodology. The proposed method is based on the determination of the specific discounted costs related to the technical condition of the machine, spent on a conventional unit of work performed. It combines economic and technical indicators that characterize the performance of the machine. This makes it possible to indirectly assess its technical efficiency. Procedures for obtaining and processing input information, analytical dependences for establishing the components of the mathematical model and its solution are shown.
Findings. Using the proposed method, a comparison is performed of three conventional similar models of workover rigs, which are positioned as more reliable, and two which are less reliable and cheaper. Their indicators are formed as a weighted average based on the analysis of an array of statistical information. The obtained values were used to indirectly determine the specific discounted costs for the maintenance of rigs in working order for a period of time; the rigs are characterized by the indicator of technical efficiency. The comparison of these indicators for similar workover rigs is performed for such characteristic points as the moment of balancing of expenses, expenses for the forecasted period of operation, the periods of operation at which expenses are balanced. It is confirmed that usually the gain from the greater durability far exceeds the reduction of the economic effect of the rise in price of the machine.
Originality. The proposed method for engineering forecasting of technical efficiency of technological machines using values of economic and technical indicators available to engineers of the petroleum industry.
Practical value. This assessment is intended to objectively compare several analogue models and make a reasonable choice of a more efficient technological machine.
Keywords: workover operation, mobile rig, technological machine, life cycle cost, engineering forecasting
References.
1. Volovetskyi, V.B., Shchyrba, O.M., & Vytiaz, O.Yu. (2014). Development of comprehensive measures aimed at increasing the efficiency of hydrocarbon extraction when developing deposits for depletion. Prospecting and Development of Oil and Gas Fields, 3(52), 154-165.
2. Mansour, H., Munir Ahmad, M., Dhafr, N., & Ahmed, H. (2013). Evaluation of operational performance of workover rigs activities in oilfields. International Journal of Productivity and Performance Management, 62(2), 204-218. https://doi.org/10.1108/17410401311295740.
3. Fernndez Prez, M.A., Oliveira, F., & Hamacher, S. (2018). Optimizing Workover Rig Fleet Sizing and Scheduling Using Deterministic and Stochastic Programming Models. Industrial & Engineering Chemistry Research, 57(22), 7544-7554. https://doi.org/10.1021/acs.iecr.7b04500.
4. Stalin, M.F., & Sanjay, J. (2015). Efficiency of Time Comparing with Modular Rigs for Workover Operation. International Journal of Engineering Research & Technology (IJERT), 4(06), June-2015. https://doi.org/10.17577/IJERTV4IS060216.
5. Mansour, H., Ahmad, M.M., & Ahtita, F. (2014). Practical Evaluation Workover Framework (PEWF) for evaluation and process improvement of Workover Rigs in the Oilfields. Proceedings of the 24th International Conference on Flexible Automation & Intelligent Manufacturing FAIM 2014. https://doi.org/10.14809/faim.2014.1153.
6. Kusyi, Ya.M., Lychak, O.V., & Onysko, O.R. (2020). Development of a structural model of the product life cycle from the standpoint of the mechanics of technological inheritance. Naukovyi Visnyk Ivano-Frankivskoho Natsionalnoho Tekhnichnoho Universytetu Nafty i Hazu, 1(48), 23-37. https://doi.org/10.31471/1993-9965-2020-1(48)-23-37.
7. Kusyi, Ya.M., Stupnytskyi, V.V., Lytvyniak, Ya.M., Mentynskyi,S.M., & Panchuk, V.H. (2021). Formation of initial parameters of the product at the stage of creation of its life cycle. Naukovyi Visnyk Ivano-Frankivskoho Natsionalnoho Tekhnichnoho Universytetu Nafty i Hazu, 1(50), 77-90. https://doi.org/10.31471/1993-9965-2021-1(50)-77-90.
8. Major, D.D. (2015). Equipment Life-cycle Cost Analysis. Gransberg, Principal Investigator Institute for Transportation Iowa State University. April Research Project Final Report 2015-16. Retrieved from http://www.dot.state.mn.us/research/TS/2015/201516.pdf.
9. Saridaki, M. (2019). Implementing life-cycle costing: data integration between design models and cost calculations submitted. Journal of Information Technology in Construction, 24, 14-23.
10. Bengtssonab, M., & Kurdvebc, M. (2016). Machining Equipment Life Cycle Costing Model with Dynamic Maintenance Cost. ScienceDirect 23rd CIRP Conference on Life Cycle Engineering. Procedia CIRP, 48,102-107. https://doi.org/10.1016/j.procir.2016.03.110.
11. Kayashima, E.C., & Marques Junior, U. (2019). LCC methodology application for equipment replacement strategy definition. REM, International Engineering Journal, Special Supplement 1, Ouro Preto, 72(1), 69-74. https://doi.org/10.1590/0370-44672018720141.
12. Calixto, E. (2016). Gas and Oil Reliability Engineering. Modeling and Analysis (2nd ed.). Gulf Professional Publishing is an imprint of Elsevie. Hardcover, ISBN: 9780128054277.
13. Dhillon, B.S. (2017). Life Cycle Costing for Engineers. New York: CRC Press. ISBN: 9781138072022.
14. Buchynskyi, M.Ya., & Buchynskyi, A.M. (2019). Comparison of efficiency of petroleum machines at their purchase. Naukovo-tekhnichnyi zhurnal Heotekhnolohii, NTU KhPI, 1, 43-46.
Newer news items:
- Legal security of environmental safety under the conditions of marital state in Ukraine - 30/10/2022 01:53
- A risk of pulmonary diseases in miners while using dust respirators - 30/10/2022 01:53
- Problems of development of innovative power supply systems of Ukraine in the context of European integration - 30/10/2022 01:53
- Estimation and forecasting of carbon dioxide emissions from coal-fired thermal power plants in Ukraine - 30/10/2022 01:53
- Mathematical simulation of autonomous wind electric installation with magnetoelectric generator - 30/10/2022 01:53
- Experimental evaluation of fire hazard of lithium-ion battery during its mechanical damage - 30/10/2022 01:53
- Substantiating the methods for calculating the split cylindrical drums of mine hoisting machines with increased rope capacity - 30/10/2022 01:53
- Load of the wagon-platform for transportation of bulk cargoes - 30/10/2022 01:53
- Impact of weak electromagnetic fields on the properties of coal substance - 30/10/2022 01:53
- Use of natural phosphate wastes in the manufacture of construction bricks - 30/10/2022 01:53
Older news items:
- Substantiation of the optimal parameters of the bench elements and slopes of iron ore pits - 30/10/2022 01:53
- Peculiarities of drilling hard rocks using hydraulic shock technology - 30/10/2022 01:53
- Phenomena and mechanism of slagging and corrosion in energy use of coal with a high content of salts - 30/10/2022 01:53
- On the earliest evidence of the middle Dnipro area non-flint rocks use - 30/10/2022 01:53