Науковий вісник НГУ

Selection and justification of drilling and blasting parameters using genetic algorithms

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №4 2023

Last Updated on 28 August 2023

Published on 30 November -0001

Hits: 2276

Authors:

S.A.Us, orcid.org/0000-0003-0311-9958, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.K.Ishchenko, orcid.org/0000-0003-2449-5258, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

D.V.Koba, orcid.org/0000-0002-0893-4954, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

K.S.Ishchenko*, orcid.org/0000-0003-2237-871X, Institute of Geotechnical Mechanics named by N.Poliakov of National Academy of Sciences of Ukraine, Dnipro, Ukraine, е-mall: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (4): 040 - 047

https://doi.org/10.33271/nvngu/2023-4/040

Abstract:

Purpose. Using experimental and theoretical studies to justify the rational location of charges of various types and their technological parameters in the fan, taking into account the physical and mechanical properties and structural features of the rocks in the mountain massif.

Methodology. In the experiments, an improved method of geostructural analysis of rocks was used to obtain detailed data on their properties, the block structure of the massif, and the type and direction of development of crack systems. Identification of crack systems, their density, intensity, and direction of development of crack systems is carried out on petrographic sections using microscopic analysis, these are used to calculate the average indicator of the cracking coefficient, while the funneling method – the anisotropy coefficient. The justification of the rational location and the number of charges in each fan was performed using the methods of genetic algorithms and the developed software product.

Findings. The coefficient of cracking and anisotropy of physical and mechanical properties of uranium ores was calculated, which was 78 cr/sm² and 1.4, respectively. According to the developed mathematical models and the software product, the optimization problem was solved using genetic algorithms, which determined the main priorities: the location of the charge in the fan according to the structure of the massif and the rational diameter of the well, which helps to limit the number of oversized blocks of reflected ore.

Originality. The regularities are established of the change in the anisotropy coefficient from the cracking coefficient, the nature of the distribution and the number of microcracks (cr/sm²) in the quartz grains, which is present in uranium ore according to a linear law, and the output (in %) of oversized blocks during the destruction of uranium ore from the cracking coefficient – according to the polynomial law. For the first time, the optimal location and the number of charges in each fan, the diameter of the wells, taking into account the type of rock, its strength and fissure, and the geometric parameters of the ore deposit, were determined based on the constructed mathematical models and the developed software product.

Practical value. The indicated results of the experimental and theoretical studies will form the basis for the development and substantiation of rational parameters of resource-saving and seismically safe methods for breaking strong rocks of complex structure during the extraction of uranium and iron ores by the energy of the explosion in mines.

Keywords: boreholes, solid medium, explosive, cracking, anisotropy, genetic algorithm

References.

1. Frolov, O. O., & Mal`czeva, Yu. S. (2018). Determination of effective diameter downhole charge taking into account the technical and economic assessment blasting works. Visnyk of Kryvyi Rih National University, 46, 9-14.

2. Vovk, O. A. (2013). Parameters of seismic waves under the action of a concentrated charge. Ugol Ukrainyi, (7), 42-45.

3. Lyashenko,V. I., & Dudchenko, A. H. (2012). Substantiation of seismic-safe parameters for urban development of parameters of massive explosions in the underground development of uranium deposits. Gornyi zhurnal, (8), 40-44.

4. Lyashenko, V. I., & Kislyiy, P. A. (2015). Substantiation of seismic-safe parameters of explosions during underground mining of near-surface reserves of a field under urban development. Izvestiya vysshikh uchebnykh zavedenii. Gornyi zhurnal, (3), 84-93.

5. Lyashenko, V. I., & Kislyiy, P. A. (2013). Seismic monitoring of underground mining of uranium deposits. Tsvetnaya metalurgiya, 6, 23-32.

6. Aleksandrova, N. I. (2017). Features of the propagation of pendulum waves arising from the explosion of a buried cord charge in a block rock mass. Fiziko-tehnicheskie problemy razrabotki poleznykh iskopaemykh, (5), 29-36.

7. Aleksandrova, N. I. (2016). Seismic waves in a three-dimensional block medium. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472(2192). https://doi.org/10.1098/rspa.2016.0111.

8. Us, S. А., & Ishchenko, K. S. (2018). Substantiation of the place of laying of explosive charges in the massif of strong rocks, (1), (pp. 13-17). Brno: Baltija Publishing.

9. Segarra, P., Sanchidrián, J.A., Castedo, R., López, L.M., & Del Castillo, I. (2015). Performance of some coupling methods for blast vibration monitoring. Journal of Applied Geophysics, 112, 129-135.

10. Humenyk, I. L., Strilets, O. P., & Shvets, V. Yu. (2012). Determination of optimal parameters of seismically safe drilling operations at the Pishchansky deposit of migmatites and granites. Suchasni resursoenerhosberihaiuchi tekhnolohii hirnychoho vyrobnytstva, 2(10), 112-119.

11. Kumar, R., Choudhury, D., & Bhargava, K. (2016). Determination of blast- induced ground vibration equations for rocks using mechanical and geological properties. Journal of Rock Mechanics and Geotechnical Engineering, 8(3), 341-349. https://doi.org/10.1016/j.jrmge.2015.10.009.

12. Boiko, V. V. (2012). Problems of seismic safety of explosives in quarries of Ukraine: monograph. Kyiv: TOV “Vydavnytstvo Stal”.

13. Khlevniuk, T. V. (2013). Seismic safety of buildings and structures during  blasting operations in quarries. Visnyk Zhytomirskoho Derzhavnoho Tekhnolohichnoho Universytetu (ZhDТU), 1(64), 144-147.

14. Gui, Y. L., Zhao, Z. Y., Jayasinghe, L. B., Zhou, H. Y., Goh, A. T. C., & Tao, M. (2018). Blast wave induced spatial variation of ground vibration considering field geological conditions. International Journal of Rock Mechanics and Mining Sciences, 101, 63-68. https://doi.org/10.1016/j.ijrmms.2017.11.016.

15. Li, J. C., Li, N. N., Chai, S. B., & Li, H. B. (2017). Analytical study of ground motion caused by seismic wave propagation across faulted rock masses. International Journal for Numerical and Analytical Methods in Geomechanics, 42(1), 95-109. https://doi.org/10.1002/nag.2716.

16. Belin, V. A., Holodilov, A. N., & Gospodarikov, A. P. (2017). Methodological foundations for predicting the seismic action of massive explosions. Gornyi zhurnal, (2), 66-68.

17. Holodilov, A. N., & Gospodarikov, A. P. (2020). Model for calculating seismic vibrations arising from massive explosions in underground mines. Fiziko-tehnicheskie problemy razrabotki poleznykh iskopaemykh, (1), 33-40.

18. Frolov, O. O., & Khlanovskyy, A. V. (2017). Regarding the choice of the effective diameter of downhole charges in the quarryх. Visnyk NTUU “KPI”. Seriya “Hirnytstvo”, 33, 15-21.

19. Zuyevska, N. V., Chala, O. M., Tarasyuk, O. S., & Pasko, M. V. (2018). Modeling of the process of explosive destruction of ferrous quartzites. Visnyk Donetskoho Hirnychoho Instytutu, (1), 39-45.

20. Zhukova, N. I. (2014). Development of well charges based on the criterion of energy consumption of drilling rock massifs with voids. Visnyk NTUU “KPI”. Seriya “Hirnytstvo”, 23, 40-47.

21. DSTU 4704:2008 Carrying out industrial explosions. Seismic safety standards to replace DSTU П 4704:2006 (2008). Kyiv: Derzhspozhyvstandart. Retrieved from http://online.budstandart.com/ua/catalog/doc-page?id_doc=86092.

22. DSTU 7116:2009 Industrial explosions. Method for determining the actual seismic stability of buildings and structures (2010). Kyiv: Derzhspozhyvstandart Ukrainy. Retrieved from http://online.budstandart.com/ru/catalog/doc-age.html?id_doc=26057.

23. Stanina, O. D. (2015). On some mathematical models of facility location problems of mining and concentration industry, (pp. 419-424). Balkema – London: CRC Press, Taylor & Francis Group.

24. Us, S., Ishchenko, O., & Koba, D. (2019). New methodical approaches to justify selection explosive for destruction of solid rocks. International Conference Essays of Mining Science and Practice, Dnipro, Ukraine, June 25-27. https://doi.org/10.1051/e3sconf/201910900032.

25. Us, S. A., Solovev, A. V., & Ishchenko, K. S. (2017). Mathematical justification on the choice of explosive material to rupture strong rocks of complex structure. Мetallurgical and Mining Industry, (5), 42-45.

26. Ishchenko, В.S. (2017). The method of chipping rocks. (Ukrainian Patent No.118271). Ukraine.

• < Prev
• Next >