Search - Науковий вісник НГУ

1. Determining the parameters of the functioning for a nonlinear ballistic system in a real external environment: (Content №2 2024); ... I. A., Ivantsov, S. V., & Laukhin, V. D. (2017). The analysis of interrelation between kinetics of propagation of plastic deformation and initiation of ductile fracture. Metallofizika i Noveishie ...; Created on 01 May 2024
2. Influence of hot plastic deformation on properties of the carbon steel: (Content №2 2024); ... Hirnychoho Universytetu. 2024, (2): 045 - 051 https://doi.org/10.33271/nvngu/2024-2/045 Abstract: Purpose. Determination of the influence of hot plastic deformation degree on the set of carbon steel ...; Created on 01 May 2024
3. Microstructures and mechanical properties of cold rolled pipes with increased small deformation: (Content №3 2023); ... Yu., & Zhang, Ch. (2018). Fabrication of nanostructure in inner-surface of AISI 304 stainless steel pipe with surface plastic deformation. Journal of Materials Science and Technology, 34(11). https://doi.org/10.1016/j.jmst.2018.05.012. ...; Created on 27 June 2023
4. Elastic, inelastic and time constant measurement for M102 (AL–C–O) dispersions-reinforced aluminum alloys: (Content №5 2021); ... test samples with longitudinal machining directions. A constant time interval is set for the fabric a quarter-hour span, which is based on the investigation of inelastic and plastic deformations in the ...; Created on 29 October 2021
5. Influence of particle geometry on the efficiency of operation of quasistatic and inertial disintegrators: (Content №6 2020); ... 14. Sachuk, Yu.V., & Maksymuk, O.V. (2018). Computer modeling of elastic-plastic deformation in problems of contact interaction of canonical dies with a half-plane. Matematychne ta kompiuterne modeliuvannia. ...; Created on 22 December 2020
6. Two-dimensional elastic theory methods for describing the stress state and the modes of elastic boring: (Content №1 2020); ... in periodic interface gaps. Mater. Sci., 51(6), 804-813. 12. Labibov, R. R., Chernyakov, Y. A., Sheveleva, A. E., & Shevchenko, A. G. (2018). Strips of localization of plastic deformation. ...; Created on 10 March 2020
7. Thermodynamic aspect of rock destruction: (Content №1 2020); ... 377-389. 2. Zuev, L. B. (2015). Macroscopic Physics of Plastic Deformation of Metals. Uspehi Fiziki Metallov, 16(1), 35-60. https://doi.org/10.15407/ufm.16.01.035. 3. Ştiucă, P., ...; Created on 10 March 2020
8. On determining productive capacity of EV traction battery repair area: (Power Supply Technologies); ... Ivantsov, S. V., & Laukhin, V. D. (2017). The Analysis of Interrelation between Kinetics of Propagation of Plastic Deformation and Initiation of Ductile Fracture. Metallofiz. Noveishie Tekhnol., 39(10), ...; Created on 26 October 2019
9. Mathematical modeling in the calculation of reinforcing elements: (Geotechnical and mining mechanical engineering, machine building); ... out under antiplastic deformation. Phys.-Math. modeling and inform. Technology, (11), 91-96. 4. Dziubik, A. R., Nykolyshyn, T. M., & Porokhovskyi, Yu. V. (2016). Influence of residual stresses ...; Created on 26 October 2019
10. Studying coal seam bedding tectonic breach impact on supporting parameters of mine workings with roof bolting: (Mining); ... of Mining Pressure, 1(26), 47-55. 14. Seryakov, V. M. (2014). On the effect of elastoplastic deformation of microlayer contacts on the stress state of host rocks in the vicinity of the developed ...; Created on 26 October 2019
11. Improving reliability of drill pipe by strengthening of thread connections of its elements: (Geotechnical and Mining Mechanical Engineering, Machine Building); ... Abstract: It is recommended to include surface strengthening by plastic deformation into technological process of manufacturing boring pipes and nipples connecting them, which are made of 40ХН ...; Created on 19 August 2019
12. Vibrational-centrifugal surface strengthening of drill and casing pipes: (Geotechnical and mining mechanical engineering, machine building); ... e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Abstract: Purpose. Development of new constructions of devices for strengthening drill and casing pipes by surface plastic deformation, determination of ...; Created on 29 October 2018
13. Identification of material parameters for numerical simulation of the behavior of rocks under true triaxial conditions: (Solid State Physics, Mineral Processing); ... elastic modulus, the shear modulus and the coefficient of transverse deformation, as well as the functional dependence of the dilation from the plastic deformation and the coefficient of rigidity. Originality. ...; Created on 29 October 2018
14. Perspectives of improving physical and mechanical properties of thermal coatings by electropulse exposure: (Geotechnical and mining mechanical engineering, machine building); ... of the coatings by grinding sub grain size to nanoscale inclusive were defined. The possibility of thermal stabilization poligonization substructure of coatings by plastic deformation was investigated. ...; Created on 16 March 2017
15. Determination of the displacement of rock mass nearby the dismantling chamber under effect of plow longwall: (Geotechnical and mining mechanical engineering, machine building); ... chamber were studied in situ using tell-tale stations. Numerical simulation was carried out to determine the rock stress-strain state applying a plastic deformation model. The numerical procedure of strain ...; Created on 22 June 2016
16. Determination of the rock subsidence spacingin the well underground coal gasification: (Mining); ... passing of gas flows. Methodology. The analytical research was based on the elastic and elastic-plastic deformations that occur in changing the artificial shell parameters in the zone influenced by ...; Created on 08 February 2016
17. New technology of modifying a machine element surface in an attempt to overcome the tribological barrier: (Geotechnical and mining mechanical engineering, machine building); ... unit surface is recovered as a result of the initialization of self-organizing processes during the plastic deformation. Practical value. The application of friction modifiers makes it possible ...; Created on 04 February 2016
18. Forming the bilayer artificially created shell of georeactor in underground coal well gasification: (Mining); ... studied on the test unit with special sensors. Numerical analysis used to determine the stress-strain state of rocks based on thermo-elastic-plastic deformation model. To get synthesis dependencies was ...; Created on 04 February 2016
19. Support loading of assembly chamber in terms of Western Donbas plough longwall: (Mining); ... face are determined by finite element method based on elastoplastic deformation model. The procedure of strain accumulation is implemented at the sequential change of cavity size. Failure zones are determined ...; Created on 13 November 2014
20. Formation of geotechnical properties of the rock mass adjacent to tunnels by roll pressing: (Mining); ... underground excavation by roller compaction method taking into account hardening and slow plastic deformation zone creating. Methodology. We have simulated the main technological parameters of the tunnel ...; Created on 11 May 2014

Науковий вісник НГУ

Archive

Most read

NEW ON THE SITE

Visitors

Guest Book

Registration data

Contacts