- 1. Mathematical modeling of a magnetic gear for an autonomous wind turbine
- (Content №2 2024)
- ... Abstract: Purpose. Development of a two-dimensional field mathematical model of a magnetic gearbox operating as part of a low-power wind turbine for the purpose of evaluating its parameters and characteristics ...
- Created on 01 May 2024
- 2. A hybrid ICEEMDAN and OMEDA-based vibrodiagnosis method for the bearing of rolling stock
- (Content №2 2024)
- ... 6629474. https://doi.org/10.1155/2021/6629474. 5. Dybała, J., & Gałęzia, A. (2014). A Novel Method of Gearbox Health Vibration Monitoring Using Empirical Mode Decomposition. Proceedings of the Third ...
- Created on 01 May 2024
- 3. Simulation of the process of milling and grinding cylindrical surfaces by an oriented tool in one setup
- (Content №4 2022)
- ... Abstract: Purpose. Improvement of schemes for processing the cylindrical surfaces of the shafts of gearboxes and transmissions of large-sized equipment. Development of modular spatial models of the processes ...
- Created on 29 August 2022
- 4. Determination of the cutting force components while milling cylindrical surfaces with an oriented tool
- (Content №2 2021)
- ... surfaces of gearbox shafts and others. Determination of the components of the cutting forces when machining with crossed axes of the milling cutter and part in order to use the results when assigning machining ...
- Created on 29 April 2021
- 5. Feasibility study of exploiting gearbox oil temperature of wind turbine for improving a heat pump water heater in cold areas
- (Content №2 2021)
- ... Abstract: Purpose. Feasibility of completely dispensing with solar collectors (SCs) that are used in heat pump (HP) systems for hot water in cold areas. Methodology. Since the temperature of gearbox oil ...
- Created on 29 April 2021
- 6. Dynamic loads in self-aligning gear transmissions of heavy loaded machines
- (Content №1 2021)
- ... of air cooled condenser gearbox. Case Studies in Engineering Failure Analysis, 2, 150-156. https://doi.org/10.1016/j.csefa.2014.08.003. 4. Vinogradov, B.V., & Fedin, D.O. (2016). The stress state of ...
- Created on 05 March 2021
- 7. Forecasting of wear of pads of modernized brake system devices of bogies of freight cars using ARIMA models
- (Content №6 2020)
- ... 13. Mykhalkiv,S., & Bulba,V. (2019). The forecasting of the technical state of the traction gearboxes of electric trains with discrete stochastic models. Collected Scientific Works of Ukrainian State ...
- Created on 22 December 2020
- 8. Compound fault diagnosis of gearbox based on blind source separation and EEMD-SVD
- (Geotechnical and mining mechanical engineering, machine building)
- ... was applied in gearbox fault diagnosis, which is advantageous to separate mixed signal and make fault diagnosis. Methodology. Based on the gearbox experiment platform of laboratory, first, we used ...
- Created on 08 February 2016
- 9. Optimization of structural elements of drive gearbox shafts of mine scraper conveyors
- (Geotechnical and mining mechanical engineering, machine building)
- ... simulation model of optimal structural parameters of drive gearbox shafts synthesis using information technologies. Methodology. To solve the task we applied the method of Monte Carlo which consists ...
- Created on 10 July 2014