- 1. On the issue of load’s external ballistics under low-speed transportation
- (Content №4 2024)
- ... be integrated into practical applications within the realms of mathematical physics and engineering computations. This is particularly pertinent in the advancement of control algorithms for ballistic systems. ...
- Created on 28 August 2024
- 2. Determining the parameters of the functioning for a nonlinear ballistic system in a real external environment
- (Content №2 2024)
- ... and the solution algorithm can be integrated into applied problems of mathematical physics and engineering calculations, particularly the development of ballistic system control algorithms. Keywords: ...
- Created on 01 May 2024
- 3. Heuristic control of power consumption by up to 1000 V electrical loads at mining enterprises
- (Content №1 2024)
- ... Demand-Side Management: A Review on Scheduling and Control Algorithms for Demand Response Provision. Energies, 15(6), Article 6. https://doi.org/10.3390/en15062211. 13. Nayak, S. K., Sahoo, N. C., & ...
- Created on 29 February 2024
- 4. Analysis of the input material flow of the transport conveyor
- (Content №5 2023)
- ... it possible, based on these regularities from the set of available control algorithms, to choose the optimal control algorithm for the parameters of the operating conveyor section. This allows reducing ...
- Created on 27 October 2023
- 5. Simulation of industrial solar photovoltaic station with transformerless converter system
- (Content №5 2021)
- ... J., & Zhang, L. (2012). Multilevel DC-Link Inverter and Control Algorithm to Overcome the PV Partial Shading. IEEE Transactions on Power Electronics, 28(1), 14-18. https://doi.org/10.1109/TPEL.2012.2209460. ...
- Created on 29 October 2021
- 6. Integrated system of modular power supply and multilevel control of brushless dc motor for electric vehicles
- (Content №6 2020)
- ... Abstract: Purpose. Development of a multi-purpose control algorithm for a cascaded semiconductor inverter to provide a six-step switching of phase voltages of a brushless DC (BLDC) motor, multilevel regulation ...
- Created on 22 December 2020
- 7. A complex source of electrical energy for three-phase current based on a stand-alone voltage inverter
- (Content №1 2020)
- ... for implementing the control algorithm, a comparative analysis method and an analysis of a symmetric power system were applied. Findings. The efficiency of the asynchronous motor power system from ...
- Created on 10 March 2020
- 8. Combined control system on the basis of two discrete time equalizers
- (Content №1 2020)
- ... system to coordinate and parametric perturbations. Practical value. The research results can be used for designing control algorithms for technical objects with their subsequent implementation program ...
- Created on 10 March 2020
- 9. Control of the belt speed at unbalanced loading of the conveyor
- (Contens №6 2019)
- ... consumption for material movement is found. An example of control algorithm development is given. Originality. PDE-models of transport systems of conveyor type and energy-saving algorithms for controlling ...
- Created on 23 December 2019
- 10. Control of energy flows in electric drivetrain of electric vehicle with extra DC source
- (Electrical Complexes and Systems)
- ... and simulation were used while researching modes of AC and DC components using one inverter. Also, a comparative analysis method was applied to select the optimal method for implementing the control algorithm. ...
- Created on 24 April 2019
- 11. Synthesis by using the sliding-mode control theory for the fuzzy logic controller of the direct torque control system
- (Power Supply Technologies)
- ... Abstract: Purpose. Improvement of the direct torque control algorithm and thereby increase in the efficiency of the electric drive on the basis of the squirrel cage induction motor. Methodology. The ...
- Created on 29 October 2018
- 12. Three-to-one phase converter's control method for power factor corrected power supply of resistance welding machine
- (Electrical Complexes and Systems)
- ... regularities, characteristics and generalized requirements applicable to power supplies for resistance welding machines. Findings. The control algorithm for the three-to-one phase matrix converter ...
- Created on 27 August 2018
- 13. Energy efficient power supply system and automatic control of modes of the “power supply – pumping station” complex
- (Electrical Complexes and Systems)
- Authors: Y. S. Paranchuk, Dr. Sc. (Tech.), Prof., orcid.org/0000-0002-8400-1267, Lviv Polytechnic National University, Lviv, Ukrainе, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it. V. H. Lysiak, ...
- Created on 03 July 2018
- 14. The method of automatic control system synthesis on the base of discrete time equalizer
- (Information technologies, systems analysis and administration)
- ... control algorithms for technical objects with their further program implementation in the microcontroller or microprocessor control system. References. 1. Sheremet, О. and Sadovoi, O., ...
- Created on 06 September 2017
- 15. Three-phase power supply for resistance welding machine with corrected power factor
- (Electrical Complexes and Systems)
- Authors: S.K.Podnebenna, Cand. Sc. (Tech.), Assoc. Prof., State Higher Educational Institution “Priazovskiy State Technical University”, Mariupol, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. V.V.Burlaka, ...
- Created on 06 September 2017
- 16. Neural network identification technology for manufacturing operations of drilling rig
- (Information technologies, systems analysis and administration)
- ... manufacturing operations to ensure the optimal control algorithm of the process of deepening the well automatically. Methodology. The problem of identifying the technical operations of a drilling ...
- Created on 24 July 2017
- 17. Comparison of mechanical properties of asynchronous electric motors at various schemes of parametric control
- (Electrical Complexes and Systems)
- ... Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Abstract: Purpose. To choose general control algorithm for asynchronous motor, to obtain mechanical specifications for different parametric ...
- Created on 16 March 2017
- 18. Contactless power transfer system based on multi model adaptive control
- (Electrical complexes and systems)
- ... based on multi-model adaptive control. Methodology. This method adjusts the duty cycle of control pulse by using the fuzzy control algorithm, and thus to control the output voltage. Findings. ...
- Created on 04 February 2016
- 19. The component choice for the induction motor field oriented control system
- (Electrical complexes and systems)
- ... and control algorithm execution. Findings. Recommendations on the microprocessor device choice, which satisfied the requirements extended by the field-oriented induction motor control system; mathematical ...
- Created on 05 November 2015
- 20. Training system for future specialists: quality control
- (Economy and management)
- ... model of future specialists training quality control that meets modern standards and the principles of social partnership. The learning process control algorithm has been developed in accordance with the ...
- Created on 28 October 2015