Науковий вісник НГУ

Comparison of mechanical properties of asynchronous electric motors at various schemes of parametric control

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Electrical Complexes and Systems

Last Updated on 16 March 2017

Published on 16 March 2017

Hits: 4063

Authors:

V.I.Lobov, Cand. Sc. (Tech.), Assoc. Prof.,State Higher Educational Institution “Kryvyi Rih National University”, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

К.V.Lobovа,State Higher Educational Institution “Kryvyi Rih National University”, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Ye.O.Fortuna, State Higher Educational Institution “Kryvyi Rih National University”, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. To choose general control algorithm for asynchronous motor, to obtain mechanical specifications for different parametric control circuits and compare them.

Methodology. A generalized scheme of parametric control for asynchronous motor and its mathematical description was used for automatic selection of power converter circuits. Based on them, comparative analysis of mechanical characteristics of the motor was performed regarding changes of the parameters of the converter.

Findings. The simulation showed that the type of static mechanical properties of the asynchronous motor depends on the selected power converter circuit, the values of opening angles of the thyristors of stator and rotor switches, control mode and changes of their equivalent resistance value. Calculated mechanical characteristics of the asynchronous motor are supported by experimental results.

Originality. Methods for analytical calculations of mechanical characteristics of the asynchronous motor with various parametric control circuits were proposed.

Practical value. The proposed technique can be used for practical engineering calculations, while the mechanical properties obtained can be applied when designing asynchronous motors with parametric control.

References/Списоклітератури

1. Krasovsky, A.B., 2015. Osnovy elektroprivoda [Basics of electric drive]. Moscow: PublishinghouseofN.E.BaumanMNTU.

Красовский А.Б. Основы электропривода / Красовский А. Б. – Москва: Издательство МГТУ им. Н.Э.Баумана, 2015. – 405 с.

2. Gorbik, V.S., 2012. The structure and control algorithms of induction electric drive with providing high performance in current (torque) circuit. Electromechanical and energy-saving systems, No. 3(19), pp. 373–374.

ГорбикВ.С. Структураиалгоритмыуправлениярегулируемымасинхроннымэлектроприводомсобеспечениеммаксимальногобыстродействияпоконтурутока(момента) / В.С.Горбик; Електромеханічнііенергозберігаючісистеми. – 2012. – № 3(19). – С. 373–374.

3. Lobov, V., 2015. Method for research of parametric control schemes by asynchronous motor. Metallurgical and Mining Industry, No. 6, pp. 102–108.

4. Pavel Kolpahchyan and Alexander Zarifyan Jr., 2015. Study of the asynchronous traction drive’s operating modes by computer simulation. Part 2. Simulation results and analysis. Transport problems, Vol. 10, Is. 3, pp. 5–15.

5. Nazarenko, V.M., Lobov, V.I., Zhosan, A.A. and Nechaieva, S.V., 2014. Universal program for automated selection of control schemes of asynchronous drives of conveyor systems. Industrialenergetics, No. 1, pp. 42–46.

Универсальная программа для автоматизированного выбора схем управления асинхронными приводами конвейерных установок / В.М.Назаренко, В.И.Лобов, А.А.Жосан, С.В.Нєчаєва; Промышленная энергетика. – 2004. – № 1. – С. 42–46.

01_2017_Lobov
2017-03-13  323.95 KB  955

• Next >