Experimental-industrial verification of maintenance method using rigid constructions with countervailing cavities in the mine “Scheglovskaya-Glubokaya”
User Rating: 
/ 0
- Details
-
Category: Mining
-
Last Updated on 25 December 2013
-
Published on 19 December 2012
-
Hits: 4291
Authors:
N.N. Kasyan, Dr. Sci.(Tech.), Professor, State Higher Educational Institution"Donetsk National Technical University", Head of the Department of Mineral Deposits Development, Donetsk, Ukraine
V.N. Mokrienko, State Higher Educational Institution “Donetsk National Technical University”, postgraduate student, Donetsk, Ukraine
I.G. Sakhno, Cand. Sci. (Tech.), Associate Professor, State Higher Educational Institution “Donetsk National Technical University”, Donetsk, Ukraine
Abstract:
Purpose. To study features of the displacement of enclosing strata for pilot testing of a new method of protection in the mine “Shcheglovskaya-glubokaya”.
Methodology. The methodological basis of the work is a comprehensive approach that includes a series of preliminary laboratory tests on physical models using the method of equivalent materials. A new method of ensuring the stability of development working through the use of rigid constructions with countervailing cavities. During the industrial test the method of field observations, proposed by members of Donetsk National Technical University has been used for recording of the spatial displacement of the tunnel contour in time. On the base of registered data the graphs of shifting of floor and ceiling of the tunnel were constructed for workings protected by means of usual methods and those where the new protection method had been tested, taking into account the distance to the stope. We have analyzed the rate of displacement of rocks enclosing the working, and constructed the cross sections of the workings in the reference grid at the distance of 50, 100 and 150 m from the stope. It is possible to establish the relative value of reduction of the displacement floor and ceiling of the tunnel protected by means of the proposed method in comparison with old methods. In the course of industrial tests the destruction of semi-blocks of support structures appeared. Therefore, it was held the next stage of research on measuring the pressure on support structures. Also, at this stage the material strength certificate for semi-blocks was drawn up. As a result, conclusions about ways of improvement of the proposed method for implementation in the mine “Shcheglovskaya-glubokaya” have been made. The solution consists in using more durable material for semi-blocks.
Findings. In general, industrial tests were completed with positive results. Since the displacement of rocks of the floor in the tested section reduced by 30–40% compared with the control section and the displacement of the ceiling increased by 7%. The increase of ceiling displacement was caused by the insufficient strength of the material of semi-blocks.
Originality. Provided that the ratio of the width of the cavity and the width of the protective structures is 1:1 and the ratio of the depth protective structure to its width is 2:1 the swelling in the working and the provocation of blowup in the fixing space were reduced.
Practical value. An addition to the certificate on control and fixing the roof has been made and this allowed reducing the displacement of floor by 30–40%, with the expected economic effect of 238 UAH / m.
References:
1. Chudek, M. (2002), Geomechanika z podstawami ochrony srodowiska gorniczego i powierzchni terenu, Wyd. Pol. Sl., Gliwice.
2. Геомеханические процессы в породных массивах [Текст]: монография / А.Н. Шашенко, Т. Майхерчик, Е.А. Сдвижкова; Под общ. ред. А.Н. Шашенко // Нац. горн. ун-т (Днепропетровск, Украина).AGH – ун-т науки и технологий (Краков, Польша). – Днепропетровск, 2005. – 319 с.
Shashenko, A.N., Mayherchik, T. and Sdvizhkova, Ye.A. (2005), Geomekhanicheskiye protsessy v porodnykh massivakh [Geomechanical Processes in Rock Massif] Monograph, National Mining University, Dnepropetrovsk, Ukraine. AGH University, Cracow, Poland.
3. Канін В.О. Фізико-технічні основи охорони виймальних виробок в умовах нестійких порід: автореф. дис. на здобуття звання доктора техн. наук: 05.15.02 / В.О. Канін // НАН України, Ін-т геотехн. механіки ім. М.С. Полякова. – Дніпропетровськ, 2011. – 34 с. – укp.
Kanin, V.O. (2011),“Physical and technical bases of excavation excavations in unstable rocks”, Abstract of Dr. Sci. (Tech.) dissertation, 05.15.02, NAS of Ukraine, M.S. Polyakov Institute of Geotechnical Mechanics, Dnipropetrovsk, Ukraine, 34 p.
4. Ильяшов М.А. Коньюнктурно-экономические и горно-технологические аспекты поддержания выемочных штреков угольных шахт / М.А. Ильяшов // Геотехническая механика: Межвед. сб. науч. тр. – Днепропетровск: ИГТМ НАНУ – 2007. – Вип. 73. – С. 61–69. – Бібліогр.: 8 назв. – рос.
Ilyashov, M.A. (2007), “Market and economic, and mining and technological aspects of maintaining of excavation support drifts in coal mines”, Geotehnicheskaya mehanika, IGTM NANU, Dnepropetrovsk, no.73, pp. 61–69.
5. Ильяшов М.А. Новые технологические решения в охране концевых участков высоконагруженных лав / Ильяшов М.А., Байсаров Л. // Геотехническая механика: Сб. науч. тр. ИГТМ НАНУ. – Днепропетровск, 2006. – № 61. – С. 79 –92.
Ilyashov, M.A. and Baysarov, L.V. (2006), “New technological solutions in the protection of end sections of high loaded lava”, Geotehnicheskaya mehanika, IGTM NANU, Dnepropetrovsk, no.61, pp. 79–92.
6. Синтез комбинированных охранных систем для поддержания подготовительных выработок в сложных горно-геологических условиях / А.В. Агафонов, О.Д. Кожушок, Е.Н. Халимендиков, Л.В. Прохорец // Геотехническая механика. Выпуск 78. – Днепропетровск-Симферополь, 2008. – С. 73–86.
Agafonov, A.V., Kozhushok, O.D., Halimendikov, E.N. and Prohorets, L.V. (2008), “Synthesis of combined security systems to support the development workings in difficult geological conditions”, Geotekhnicheskaya mekhanika, Issue 78, Dnepropetrovsk-Simferopol, pp. 73–86.
7. Мокриенко В.Н. Параметрирование нового способа охраны выемочной выработки с использованием метода эквивалентных материалов [Текст] / В.Н. Мокриенко // Сборник научных работ НГУ – Днепропетровск, 2010 – №34 – Т.1. – С. 166–173.
Mokrienko, V.N. (2010), “Parameterization of a new way of making cutter using the equivalent materials”, Sbornik nauchnyih rabot NGU, T.1, no.34, pp. 166–173.
8. Пат. 94327 Украина, МПК9 Е 21 D 11/00, E 21 С 41/18. Способ охраны горных выработок /Касьян Н.Н., Хазипов И.В., Негрей С.Г., Мокриенко В.М.; заявитель и патентообладатель Донецкий Национальный Технический Университет. – № а200911242; заявл. 05.11.2009; опубл. 26.04.2011, Бюл.№ 8, 2011 – 3 с. : ил.
Kasyan, N.N., Khazipov, I.V., Negrey, S.G. and Mokrienko, V.M. (2011), Pat. 94327 Ukraine, MPK9 E 21 D 11/00, E 21 S 41/18 “The method of mine workings maintenance”, Patentee and patent owner: Donetsk National Technical University, no. a200911242; sugggested on November 5, 2009; published on April 26, 2011, Bulletin no.8, 3 p.
9. Касьян Н.Н. Обоснование параметров способа контроля состояния горной выработки и методика его реализации / Н.Н. Касьян, И.Г. Сахно, В.Н. Мокриенко // Научные труды УкрНИМИ НАН Украины – Донецк, 2011. – Вып. 9 – часть1 – С. 57 –79.
Kasyan, N.N., Sakhno, I.G. and Mokrienko, V.N. (2011), “Justification process parameters monitoring of excavation and the method of its implementation”, Nauchnyye trudy UkrNIMI NAN Ukrainy, Donetsk, Issue. 9, part 1, pp. 57–79.
10. Породы горные. Методы определения предела прочности при одноосном сжатии: ГОСТ 21153.2-84. – [Введ. 1986-01-07] – М.: Изд-во стандартов.
GOST 21153.2-84. “Rock. Methods for determination of ultimate strength in uniaxial compression”, Valid since January 7, 1986, Izd-vo standartov, Moscow, Russia.
2012_6_kasyan
2013-12-24 
561.81 KB 
1183
Archive