Creation of conceptual solutions for the manufacture of component freight wagons from composites
/ 0
- Details
- Category: Content №5 2023
- Last Updated on 27 October 2023
- Published on 30 November -0001
- Hits: 2256
Authors:
O.V.Fomin*1, orcid.org/0000-0003-2387-9946, The State University of Infrastructure and Technologies, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.M.Fomina2, orcid.org/0000-0002-9810-8997, Volodymyr Dahl East Ukrainian National University, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
S.M.Turpak3, orcid.org/0000-0003-3200-8448, “Zaporizhzhia Polytechnic” National University, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.O.Padchenko3, orcid.org/0000-0002-5262-2755, “Zaporizhzhia Polytechnic” National University, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author email: e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (5): 102 - 107
https://doi.org/10.33271/nvngu/2023-5/102
Abstract:
Purpose. To present the results on the possibility of increasing the efficiency of the use of the operated fleet of freight wagons by creating conceptual solutions for the manufacture of their component load-bearing systems from composites.
Methodology. To increase the efficiency of using the operating fleet of freight wagons measures are offered on the development of conceptual solutions for the manufacture of their components load-bearing systems made of composites. In order to determine the possibility of service life of the basic structures of the freight wagons, the methodology given in the works by A. V. Afanasyev was used. To study the dynamic loading of the freight wagon with the actual dimensions of the constituent elements, a calculation was made. At the same time, a mathematical model was used, formed by Professor G. I. Bogomaz, taking into account its adaptation to the determination of the dynamic loading. The vertical loading of the load-bearing structure of the freight wagon was also investigated. In this regard, a mathematical model formed by Professor Yu. V. Demin was used. The accelerations obtained in the simulation of dynamic loading were taken into account when calculating the strength of the basic structure of the freight wagon.
Findings. It has been established that the design service life of the load-bearing structure of a freight wagon is at least 50 years. The results of determining the longitudinal loading of the basic structures of the freight wagon established that the acceleration acting on it is 37.7 m/s2, and with the vertical one – 5.5 m/s2. The strength calculation of the basic structure of a freight wagon showed that the maximum equivalent stresses are recorded in the zone of interaction of the center beam with the pivot and amount to 333.4 MPa, i.e. do not exceed the permissible values.
Originality. The feasibility of manufacturing component load-carrying systems of freight wagons from composites is substantiated.
Practical value. The research carried out will contribute to an increase in the efficiency of the use of railway transport, the transportation process through international transport corridors, as well as the creation of developments in the design of multifunctional car structures.
Keywords: freight wagon, composite, mechanical engineering, machine building
References.
1. Bibik, S., Strelko, O., Nesterenko, H., Muzykin, M., & Kuzmenko, A. (2020, November). Formulation of the mathematical model for the planning system in the carriage of dangerous goods by rail. IOP Conference Series: Materials Science and Engineering, 985(1), 012024. https://doi.org/10.1088/1757-899X/985/1/012024.
2. Anofriev, V. G., Rejdemejster, A. G., Kalashnik, V. A. & Kuleshov, V. P. (2016). To the issue of extending the service life of cars for transportation of pellets. Nauka ta progres transportu. Vіsnik Dnіpropetrovskoho Natsionalnoho Universytetu Zalіznychnoho Transportu, 3(63), 148-160. https://doi.org/10.15802/stp2016/74749.
3. Putyato, A. V., Konovalov, E. N., & Afanas’kov, P. M. (2016). Forecasting the remaining life of a hopper-dozer car after long-term operation taking into account the actual physical and mechanical characteristics of the material of the bearing structure. Mekhanika mashin, mekhanizmov i materialov, 1(34), 26-35.
4. Fesovets, O., Strelko, O., Berdnychenko, Y., Isaienko, S., & Pylypchuk, O. (2019). Container transportation by rail transport within the context of Ukraine’s European integration. Proceedings of the 23rd international scientific conference Transport Means, (pp. 381-386). Part 1, 2019-October. Kaunas University of Technology, Kaunas. Retrieved from https://transportmeans.ktu.edu/wp-content/uploads/sites/307/2018/02/Transport-means-2019-Part-1.pdf.
5. Kondratiev, A., Gaidachuk, V., Nabokina, T., & Kovalenko, V. (2019). Determination of the influence of deflections in the thickness of a composite material on its physical and mechanical properties with a local damage to its wholeness. Eastern-European Journal of Enterprise Technologies, 4(1(100)), 6-13. https://doi.org/10.15587/1729-4061.2019.174025.
6. Krasoń, W., Niezgoda, T., & Stankiewicz, M. (2016). Innovative Project of Prototype Railway Wagon and Intermodal Transport System. Transportation Research Procedia, 14, 615-624.
7. Divya Priya, G., & Swarnakumari, А. (2014). Modeling and analysis of twenty tonne heavy duty trolley. International Journal of Innovative Technology and Research, 2(6), 1568-1580.
8. Fomin, O., Logvinenko, O., Burlutsky, O., & Rybin, A. (2018). Scientific Substantiation of Thermal Leveling for Deformations in the Car. International Journal of Engineering & Technology, (4.3), 125-129. https://doi.org/10.14419/ijet.v7i4.3.19721.
9. Fomin, O., Kulbovsky, I., Sorochinska, E., Sapronova, S., & Bambura, O. (2017). Experimental confirmation of the theory of implementation of the coupled design of center girder of the hopper wagons for iron ore pellets. Eastern-European Journal of Enterprise Technologies, 5(1(89)), 11-18. https://doi.org/10.15587/1729-4061.2017.109588.
10. Fomin, O. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. Metallurgical and Mining Industry, 5, 31-43. Retrieved from https://www.metaljournal.com.ua/assets/Journal/9-Fomin.pdf.
11. Gubarevych, O., Goolak, S., Daki, O., & Yakusevych, Y. (2021). Determining an additional diagnostic parameter for improving the accuracy of assessment of the condition of stator windings in an induction motor. Eastern-European Journal of Enterprise Technologies, 5(5(113), 21-29. https://doi.org/10.15587/1729-4061.2021.239509.
12. Goolak, S., Gubarevych, O., Gorobchenko, O., Nevedrov, O., & Kamchatna-Stepanova, K. (2022). Investigation of the influence of the quality of the power supply system on the characteristics of an asynchronous motor with a squirrel-cage rotor. Przegląd Elektrotechniczny, 98(6), 142-148. https://doi.org/10.15199/48.2022.06.26.
13. Yakovlieva, A., & Boichenko, S. (2020). Energy Efficient Renewable Feedstock for Alternative Motor Fuels Production: Solutions for Ukraine. Studies in Systems, Decision and Control, 298, 247-259. https://doi.org/10.1007/978-3-030-48583-2_16.
14. Freight wagons. general requirements for calculations and design of new and modernized wagons of 1520 mm gauge (non-self-propelled. DSTU 7598:2014 (2015). Retrieved from http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=73763.
15. Boichenko, S., Zubenko, S., Konovalov, S., & Yakovlieva, A. (2020). Synthesis of camelina oil ethyl esters as components of jet fuels. Eastern-European Journal of Enterprise Technologies, 1(6), 42-49. https://doi.org/10.15587/1729-4061.2020.196947.
16. Sokolov, V., Porkuian, O., Krol, O., & Stepanova, O. (2021). Design Calculation of Automatic Rotary Motion Electrohydraulic Drive for Technological Equipment. In: Advances in Design, Simulation and Manufacturing IV. DSMIE 2021. Lecture Notes in Mechanical Engineering, 1, 133-142. Springer, Cham. https://doi.org/10.1007/978-3-030-77719-7_14.
17. Krol, O., & Sokolov, V. (2020). Modeling of Spindle Node Dynamics Using the Spectral Analysis Method. In: Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering, 1, 35-44. Springer: Cham. https://doi.org/10.1007/978-3-030-50794-7_4.
18. Varbanets, R., Fomin, O., Píštěk, V., Klymenko, V., Minchev, D., Khrulev, A., Zalozh, V., & Kučera, P. (2021). Acoustic Method for Estimation of Marine Low-Speed Engine Turbocharger Parameters. Journal of Marine Science and Engineering, 9, 321. https://doi.org/10.3390/jmse9030321.
19. Iakovlieva, A., Vovk, O., Boichenko, S., Lejda, K., & Kuszewski, H. (2016). Physical-chemical properties of jet fuel blends with components derived from rapeseed oil. Chemistry and Chemical Technology, 10(4), 485-492. https://doi.org/10.23939/chcht10.04.485.
20. Kondratiev, А. (2019). Improving the mass efficiency of a composite launch vehicle head fairing with a sandwich structure. Eastern-European Journal of Enterprise Technologies, 6(7(102)), 6-18. https://doi.org/10.15587/1729-4061.2019.184551.
Newer news items:
- Improvement of the enterprise’s production program as a way to adapt to market changes - 27/10/2023 19:20
- Critical infrastructure defense: perspectives from the EU and USA cyber experts - 27/10/2023 19:20
- Analysis of the input material flow of the transport conveyor - 27/10/2023 19:20
- Shaping sustainable strategies of freight forwarding companies in the environment of the road transport market - 27/10/2023 19:20
- Mineral resource assessment through geostatistical analysis in a phosphate deposit - 27/10/2023 19:19
- Controlling as an enterprise management tool in the digital economy - 27/10/2023 19:19
- Research on an eco-safe filtration plant for wastewater treatment made of natural raw materials - 27/10/2023 19:19
- Problems of prosecution for crimes against environmental security in the conditions of martial state - 27/10/2023 19:19
- The legal mechanism for environmental protection in Ukraine - 27/10/2023 19:19
- Radionuclide content in vegetation and soils in the impact zone of the railway track - 27/10/2023 19:19
Older news items:
- Liquefaction of industrial zone against earthquake loading using laboratory and field measurements - 27/10/2023 19:19
- Optimization mathematical model of a contact air cooler for a mine turbocompressor - 27/10/2023 19:19
- Principles of transport means maintenance optimization: equipment cost calculation - 27/10/2023 19:19
- Combustion and detonation of paste fuel of rocket engine - 27/10/2023 19:19
- Alternative uses for crushed stone products generated to meet the raw material needs of asphalt production in Hungary - 27/10/2023 19:19
- Evaluation of coal mines’ rock mass gas permeability in the equivalent stress zone - 27/10/2023 19:19
- Geometric modelling of face processing surfaces by planetary executive devices of tunnelling machines - 27/10/2023 19:19
- Influence of drilling mud pulsations on well cleanout efficiency - 27/10/2023 19:19
- Reducing the formation of asphaltene deposits and increasing the flow rates of oil wells - 27/10/2023 19:19
- Geophysical indicators of rare-metal ore content of Akmai-Katpar ore zone (Central Kazakhstan) - 27/10/2023 19:19
