Research into the properties of poured asphalt from electric furnace slag aggregate
- Details
- Category: Content №2 2022
- Last Updated on 30 April 2022
- Published on 30 November -0001
- Hits: 3793
Authors:
Izet Ibrahimi, orcid.org/0000-0002-8858-0462, University Isa Boletin of Mitrovica, Faculty of Geoscience, Department Materials of Metallurgy, Mitrovica, Republic of Kosovo, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Zarife Bajraktari-Gashi, orcid.org/0000-0003-4770-0664, University Isa Boletin of Mitrovica, Faculty of Geoscience, Department Materials of Metallurgy, Mitrovica, Republic of Kosovo, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (2): 096 - 101
https://doi.org/10.33271/nvngu/2022-2/096
Abstract:
Purpose. This study case shows the influence of the use of electric furnace slag as an aggregate with a high positive impact on the properties of poured asphalt (AC). Research results regarding the skid resistance, depth of surface texture, resistance to erosion, water absorption, pressure solidity, and pellets of clay have argued the fact that adding this slag to mixing eruptive aggregate indicates improvements of mechanical characteristics of poured asphalt and its surface layer.
Methodology. Preliminary preparation of the poured asphalt blend preliminary mixture, sampling and examination of the properties are developed in accordance with standard methods: EN 12697-27:2000, SK EN 12697-36:2003, EN 12697-2:2002+A1:2007, EN 12697-8:2003, EN 12697-34:2004+A1:2007, (Marshall Test), EN 12697-6:2004, and SIST EN 12697-2:2004.
Findings.The metallurgical industries for years have been using all their by-products, including slag, as valuable resources for the industry and especially in the construction materials industry. The use of this process by-product in the construction industry, mostly in road construction, is among the key factors in saving natural resources and preventing environmental pollution.
Originality. For the preparation of the preliminary recipe for three types of poured asphalt (AC 0/11, 0/8 and 0/5 mm), electric furnace slag and the eruptive sand with grain size from 0 to 11 mm, 0 to 8 mm and 0 to 4 mm were used.
Practical value. The use of this type of slag as an aggregate of this bituminous mixture will not only show improvement of the physical-mechanical properties of AC, but will also show high economic and environmental effects.
Keywords:slag, electric furnace, ferronickel, nickel, poured asphalt
References.
1. Deva, N., & Ibrahimi, I. (2021). Substantiation of refractory lining influence on the electric furnace efficiency for the production of ferronickel. Mining of Mineral Deposits, 15(3), 71-77. https://doi.org/10.33271/mining15.03.071.
2. Sofili, T., Mladenovi, A., & Sofili, U. (2011). Defining of EAF steel slag application possibilities in asphalt mixture production. Journal of Environmental Engineering and Landscape Management, 19(2), 148-157. https://doi.org/10.3846/16486897.2011.580910.
3. Bell, S., Davis, B., Javaid, A., & Essadiqi, E. (2006). Final Report on Refining Technologies of Steel. Technical Report. No. 2004-21 (CF). Retrieved from https://www.researchgate.net/publication/306293435.
4. Kara, M., Gnay, E., Kavakli, B., Tayfur, S., Eren, K., & Karadag,G. (2004). The use of steel slag in asphaltic mixture. Key engineering materials, (264), 2493-2496. https://doi.org/10.4028/www.scientific.net/KEM.264-268.2493.
5. Ibrahimi, I., Rizaj, M., & Ramadani, A. (2010). Research the possibility of transforming the ferronickel slag in the product with the economical and environmental importance. Journal of International Environmental Application and Science, 5(2), 276-281.
6. Bajraktari-Gashi, Z., Zabeli, M., & Morina, E. (2020). Determination of adhesion stages of the Fe-Ni ore at the Ferronikeli plant in Drenas. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 37-42. https://10.33271/nvngu/2021-5/037.
7. Ibrahimi, I., Deva, N., Rizaj, M., OBrien, E.Z., & Kongoli, F. (2017). Impact of the ferronickel slag in improvement of the construction materials properties. Sustainable Industrial Processing Summit SIPS, 7, 205. ISBN: 978-1-987820-73-7.
8. Ahmedzade, P., & Sengoz, B. (2009). Evaluation of steel slag coarse aggregate in hot mix asphalt concrete. Journal of hazardous materials, 165(1-3), 300-305. https://doi.org/10.1016/j.jhazmat.2008.09.105.
9. Ramadani, A. (2012). The Impact of the Ferronickel Slag Use in Improving the Environmental Image and Properties of Consumables Layers of Asphalt. Journal of International Environmental Application and Science, 7(1), 1-7.
10. Bell, S., Davis, B., Javaid, A., &. Essadiqi, E. (n.d.). Final Report on Refining Technologies of Steel, Report No. 2004-21(CF), 1-28. Retrieved from https://www.researchgate.net/publication/242158707.
11. Ibrayeva, G.M., & Sukurov, B.M. (2021). Peculiarities of microstructure of reactive diffusion zone in Al-Co system. Vestnik KazNRTU, 146-151. https://doi.org/10.51301/vest.su.2021.i2.19.
12. Schacht, C. (2004). Refractories Handbook. ISBN: 978-0429216-28-2. https://doi.org/10.1201/9780203026328.
13. Hainin, M.R., Aziz, M.M.A., Shokri, M., Jaya, R.P., Hassan,N.A., & Ahsan, A. (2014). Performance of steel slag in highway surface course. Jurnal Teknologi, 71(3), 99-102. https://doi.org/10.11113/jt.v71.3767.
Newer news items:
- Strategic diagnostics in the system of controlling the financial results of the enterprise - 30/04/2022 13:42
- Scientific and educational consortium as institutional projection of the innovative professional training - 30/04/2022 13:42
- Multi-criteria evaluation of professional qualities of railway dispatching personnel using computer simulations - 30/04/2022 13:42
- Management of structural changes in the system of economic formation of sustainable development - 30/04/2022 13:42
- Information and communication technologies as a tool and incentive for strategic decision making - 30/04/2022 13:42
- Mathematical 3D-modeling in the formation process of the overhauled surfaces in the repair industry - 30/04/2022 13:42
- Simulation of cargo delivery by road carrier: case study of the transportation company - 30/04/2022 13:42
- Non-relational approach to developing knowledge bases of expert system prototype - 30/04/2022 13:42
- State policy of Ukraine in the sphere of environmental protection in the context of European integration - 30/04/2022 13:42
- The impact of financial development on accelerating the environmental degradation in Bangladesh - 30/04/2022 13:42
Older news items:
- Improvement of concrete and building mortar technology using secondary mineral resources - 30/04/2022 13:41
- Research on chemical composition of secondary copper anodes obtained from aqueous residues of refining process - 30/04/2022 13:41
- Geological and economic risk assessment for territories of hazardous geological and technogenic processes (exemplified by Solotvyno township) - 30/04/2022 13:41
- Information and analytical support for making well-informed administrative decisions in civil protection system - 30/04/2022 13:41
- Accounting the factor of randomity of social processes in prediction of demand for electric energy - 30/04/2022 13:41
- Electromechanical system of turbomechanism when using an alternative source of electric energy - 30/04/2022 13:41
- A new approach to improving the sensitivity of earthing relay and reducing the over-voltage in 6 kV grid of open-pit mines - 30/04/2022 13:41
- Thermodynamics of the developing contact heating of a process liquid - 30/04/2022 13:41
- Establishment of a suitable reference system for the geodetic horizontal control network in hydroelectric construction in Viet Nam - 30/04/2022 13:41
- Determination of the stability of a three-layer shell of a traveling wheel with light filler - 30/04/2022 13:41