Analytical studies on constrained particle settling velocity in a water suspension of fly ash from thermal power plants
- Details
- Parent Category: 2021
- Category: Content №1 2021
- Created on 05 March 2021
- Last Updated on 05 March 2021
- Published on 30 November -0001
- Written by V.P.Nadutyi, V.S.Kurilov, O.G.Cholyshkina, V.F.Hankevych
- Hits: 2857
Authors:
V.P.Nadutyi, orcid.org/0000-0002-2453-0351, Institute of Geotechnical Mechanics named by N.Poljakov, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.S.Kurilov, orcid.org/0000-0003-3202-9003, Institute of Geotechnical Mechanics named by N.Poljakov, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.G.Cholyshkina, orcid.org/0000-0002-0681-0413, Interregional Academy of Personnel Management, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.F.Hankevych, orcid.org/0000-0002-8535-6318, Dnipro University of Technology, Dnipro, Ukraine
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (1): 032 - 038
https://doi.org/10.33271/nvngu/2021-1/032
Abstract:
Purpose. To establish analytical dependences for calculating the characteristics of the ash suspension and the velocity of constrained settling of coal and quartz depending on the particle size and density of the medium, which is necessary for calculating the design and determining the operating modes of hydraulic devices for extracting coal from water mineral suspension of fly ash from thermal power plants.
Methodology. The research was carried out on the basis of a cellular suspension model and classical concepts of constrained particle motion in laminar and turbulent flow. For analytical evaluation of the characteristics of the suspension, the defining correlations and the Wend formula for viscosity were used. The Ergun equation and correlation analysis methods were used to calculate and analyze the speed of constrained movement of ash suspension particles.
Findings. Approximating nonlinear functions are obtained for determining the speed of constrained movement of coal and quartz particle size up to 4 mm in an ash suspension with a density of 1.31.8 g/cm3. It is shown that, for both settling and ascending of coal, there is a direct relationship between the velocity and particle size, in both cases it is nonlinear. For any coal size, the speed of ascent depending on the suspension density is of extreme nature; the rational density range is 1.551.8 g/cm3 with a maximum of 1.65 g/cm3. The established dependencies allow us to determine the size of coal and quartz particles, taking into account the counter-flow of the liquid phase, as well as the boundary size.
Originality. For the regime of weak-turbulence flows there were established dependences and approximation equations of the constrained movement speed of coal and quartz particles the main components of the water suspension of fly ash from the Novo-Kramatorska TPP, depending on the size and density of the ash suspensions with changes in the characteristics of the medium depending on density. The frames of the Stokes description of processes are established. It is shown that the movement of the liquid phase in a counter-flow with precipitating particles is effective for surfacing of thin coal classes.
Practical value. The described approach can be used for analytical evaluation of the characteristics and velocity of constrained movement in various water suspensions of discrete solid particles in weak-turbulence flows. The advantage is a wider coverage of hydraulic equipment operating modes. The results obtained are necessary for designing and determining the technological modes of operation of various hydraulic devices in the technology of complex processing of fly ash from TPPs.
Keywords: mineral suspension, fly ash, density, velocity, settling, ascend
References.
1. Nadutyi, V.P., Sevastianov, V.S., & Kostyria, S.V. (2016). Justification of expediency of complex processing of fly ash of Thermal Power Plants. Geotekhnchna mekhanka, 131, 59-66.
2. Shakirova, A.V. (2019). Trends in the production and processing of ash from power generating coal. nergetics of Thermal Technology, 2(6), 32-40. ISSN: 2541-9552.
3. Kwilinski, A., Ruzhytskyi, I., Patlachuk, V., Patlachuk, O., & Kaminska, B. (2019). Environmental taxes as a condition of business responsibility in the conditions of sustainable development. Journal of Legal, Ethical and Regulatory Issues, 22 (Special Issue 2), 6-15.
4. Ryabov, Yu.V., Delitsyn, L.M., Ezhova, N.N., & Sudareva,S.V. (2019). Methods of enrichment of ash and slag waste from coal TPPs and ways of their involvement in economic circulation (review). Thermal Engineering, 3, 3-24.
5. Polulyakh, A.D., Buchatsky, A.S., Vyrodov, S.A., & Polulyakh, D.A. (2016). Enrichment of coal in magnetite suspension: monograph. Dnepropetrovsk: NMU. ISBN 978-966-350-487-2.
6. Sklyar, L.V., & Prokopchuk, D.S. (2017). Technology of concentration of slags and sludge from Thermal Power Plants. Mining Journal, 102, 91-96.
7. elija, M., Rosi, A., Radovi, N., Vasi, M., ogo, M., & Joti, M. (2016). Laboratory testing of fly as]. Technical Gazette, 6(23), 1839-1848. https://doi.org/10.17559/TV-20150317171035.
8. Radkevich, E.V., Lukashev, E.A., & Vasilyeva, O.A. (2019). Hydrodynamic instabilities and nonequilibrium phase transitions. Reports of the Academy of Sciences, 486(5), 537-542.
9. Kelbaliev, G.I. (2015). Fundamentals of the theory of sedimentation and floating of solid particles, drops and bubbles in an isotropic turbulent flow. Azerbaijan Chemical Journal, 2, 6-27.
10. Semenenko, E.V., Demchenko, T.D., & Ryzhova, S.A. (2017). Determination of the effective viscosity of structured suspensions depending on the concentration and properties of the solid phase. Geo-Technical Mechanics, 136, 13-22.
11. Bulat, A.F., Nadutyi, V.P., Chelyshkina, V.V., & Kurilov,V.S. (2020). Determination of the characteristic properties of a mineral suspension for calculating the speed of movement of particles. Geo-Technical Mechanics, 152, 8-18.
Newer news items:
- Method for optimization of switching frequency in frequency converters - 05/03/2021 00:36
- Experimental study on an overhead crane passing a rail track joint - 05/03/2021 00:36
- Shallow tunnel face stability analysis using finite elements - 05/03/2021 00:36
- Dynamic loads in self-aligning gear transmissions of heavy loaded machines - 05/03/2021 00:36
- A deformation mode in a cold rolling condition to provide the necessary texture of the Ti-3Al-2.5V alloy - 05/03/2021 00:36
- Kinetics of quartz sand and its mixtures drying by microwave radiation - 05/03/2021 00:36
- Direct method of studying heat exchange in multilayered bodies of basic geometric forms with imperfect heat contact - 05/03/2021 00:36
- Mathematical modeling of the surface roughness of the grinding wheel during straightening - 05/03/2021 00:36
- The method for determining the parameters of the diagrams of a truncated-wedge destruction of cylindrical samples of rocks - 05/03/2021 00:36
- Influence of technological process parameters on qualitative characteristics of coal thermolysis products - 05/03/2021 00:36
Older news items:
- Increasing the efficiency of water shut-off in oil wells using sodium silicate - 05/03/2021 00:36
- Improvement of sub-level caving mining methods during high-grade iron ore mining - 05/03/2021 00:36
- Geological and mining-engineering peculiarities of implementation of hydromechanical drilling principles - 05/03/2021 00:35
- Differentiation of Rudov Beds based on the statistical methods on geological and geophysical data - 05/03/2021 00:35