Articles

Calculation of the overburden ratio by the method of financial and mathematical averaged costs

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №5 2021

Last Updated on 29 October 2021

Published on 30 November -0001

Hits: 5287

Authors:

O.O.Shustov, orcid.org/0000-0002-2738-9891, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.V.Pavlychenko, orcid.org/0000-0003-4652-9180, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.P.Bielov, orcid.org/0000-0002-3283-9527, PJSC Techenergo, Lviv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.A.Adamchuk, orcid.org/0000-0002-8143-3697, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.O.Borysovska, orcid.org/0000-0001-7309-0236, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (5): 030 - 036

https://doi.org/10.33271/nvngu/2021-5/030

Abstract:

Purpose. To calculate the parameters of the development of brown coal deposits, including the limiting overburden ratio, when involving coal clay into the development together with brown coal in the composition of the coal mass.

Methodology. To calculate the cost of mining a mineral, the method of financial and mathematical averaged costs was applied, considering the level of projected capital investments and the cost of investment funds.

Findings. The influence of the involvement of coal clays in the development together with brown coal as a part of coal mass on the limiting overburden ratio is investigated. It is determined that the limiting overburden ratio for a mining enterprise that extracts brown coal is 20 m³/t, and for the extraction of coal clay in a mixture with raw brown coal 17 m³/t. The parameters of brown coal production in Novo-Dmytrivske deposit have been established, which have shown that with a coal production of 9 million tons/year, the overburden ratio is 4 m³/t. In the case of extraction of associated minerals in the form of coal clays, the opencast capacity can increase up to 20 million tons/year, and the overburden ratio will decrease down to 1 m³/t.

Originality. The dynamics of the change in the current overburden ratio over the years for the extraction of coal mass with the share of coal clays from 0 to 50% for the conditions of Novo-Dmytrivske brown coal deposit has been established. The costs to produce raw coal have been determined in terms of both natural and conventional fuel. The modelling of the costs for the extraction of minerals and rock mass, depending on the overburden ratio, has been carried out. The change in the overburden ratio was determined when coal clay and off-quality brown coal were involved in the production in comparison with the production of raw brown coal.

Practical value. It has been established that those deposits and areas that were previously related to the development of the mine method or open-pit mines with large losses of coal during the complex mining of conditional seams of raw brown coal, off-quality seams, and coal clays, can potentially be mined with minimal losses of useful fossil and with low cost.

Keywords: brown coal, coal clays, coal mass, limiting overburden ratio, mining cost

References.

1. Obozhin, .. (2016). The boundary mining ratio for the Ermakovsky complex deposit. Mining Informational and Analytical Bulletin (Scientific and Technical Journal), 3, 55-60.

2. Kolesnyk, V., Pavlychenko, A., Borysovska, O., & Buchavyy, Y. (2018). Formation of Physic and Mechanical Composition of Dust Emission from the Ventilation Shaft of a Coal Mine as a Factor of Ecological Hazard. Solid State Phenomena, 277, 178-187. https://doi.org/10.4028/www.scientific.net/SSP.277.178.

3. Baghdasaryan, .. (2017). The rationale of economic stripping ratio and the optimum pit depth for the conditions of the Hrazdan iron deposit. Proceedings of NPUA. Metallurgy, Material Sciance, Minig Engineering, 20(1), 74-80.

4. Panchenko, V., Sobko, B., Lotous, V., Vinivitin, D., & Shabatura,V. (2021). Openwork scheduling for steep-grade iron-ore deposits with the help of near-vertical layers. Mining of Mineral Deposits, 15(1), 87-95. https://doi.org/10.33271/mining15.01.087.

5. Khorolskyi, A., Hrinov, V., Mamaikin, O., & Fomychova, L. (2020). Research into optimization model for balancing the technological flows at mining enterprises. E3S Web of Conferences,201,01030. https://doi.org/10.1051/e3sconf/202020101030.

6. Sultanbekova, Z., Tsekhovoy, A., Moldabayev, S., & Sarybayev, N. O. (2020). Risks study during implementation of combined transport on ore open pit mines. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 2020-August, (1.2), 259-266. https://doi.org/10.5593/sgem2020/1.2/s03.034.

7. Moldabayev, S.K., Aben, Y., Kasymbayev, E.A., & Sarybayev,N.O. (2019). Complete cyclical-and-continuous technology equipment for intermodal vehicleconveyorrail transport. Mining Informational and Analytical Bulletin, 2019(7), 158-173. https://doi.org/10.25018/0236-1493-2019-07-0-158-173.

8. Joukov, S., Lutsenko, S., Hryhoriev, Y., Martyniuk, M., & Peregudov, V. (2020). Justification of the method of determination of the border overburden ratio. E3S Web of Conferences, 166. https://doi.org/10.1051/e3sconf/202016602005.

9. Azarian, V., Lutsenko, S., Zhukov, S., Skachkov, A., Zaiarskyi, R., & Titov, D. (2020). Applied scientific and systemic problems of the related ore-dressing plants interaction in the event of decommissioning the massif that separates their quarries. Mining of Mineral Deposits, 14(1), 1-10. https://doi.org/10.33271/mining14.01.001.

10. Adamchuk, A., Shustov, O., Panchenko, V., & Slyvenko, M. (2019). Substantiation of the method of determination the open-cast mine final contours taking into account the transport parameters. Collection of Research Papers of the National Mining University, 59, 21-32. https://doi.org/10.33271/crpnmu/59.021.

11. Saleki, M., Khalo Kakaei, R., & Ataei, M. (2020). A non-monetary valuation system for open-pit mine design. International Journal of Mining and Geo-Engineering, 54(2), 135-145. https://doi.org/10.22059/ijmge.2019.262989.594752.

12. Hamd_Allh, H.H., Moharram, M.R., Yssin, M.A., Gouda,M.A., & Embaby, A.K. (2020). Effect of Cutoff Grade and Stripping Ratio on the Net Present Value for Hamama Gold Project, Eastern Desert, Egypt. Journal of Engineering Research and Reports, 1-8. https://doi.org/10.9734/jerr/2020/v11i417064.

13. Selyukov, A., & Rybr, R. (2019). Calculation of Boundary Stripping Ratio Errors at the Stage of Quarries Designing. E3S Web ofConferences, 105, 01043. https://doi.org/10.1051/e3sconf/201910501043.

14. Shustov, O.O., Bielov, O.P., Perkova, T.I., & Adamchuk, A.A. (2018). Substantiation of the ways to use lignite concerning the integrated development of lignite deposits of Ukraine. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 5-13. https://doi.org/10.29202/nvngu/2018-3/6.

15. Moldabayev, S., Adamchuk, A., Sarybayev, N., & Shustov, A. (2019). Improvement of open cleaning-up schemes of border Mineral reserves. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 19(1.3), 331-338. https://doi.org/10.5593/sgem2019/1.3/S03.042.

16. Cheberiachko, S., Yavorska, O., Radchuk, D., & Yavorskyi, A. (2018). Respiratory Protection Provided by Negative Pressure Half Mask Filtering Respirators in Coal Mines. Solid State Phenomena, 277, 232-240. https://doi.org/10.4028/www.scientific.net/SSP.277.232.

17. Sobko, B., Drebenstedt, C., & Lozhnikov, O. (2017). Selection of environmentally safe open-pit technology for mining water-bearing deposits. Mining of Mineral Deposits, 11(3), 70-75. https://doi.org/10.15407/mining11.03.070.

18. Belmas, I., Kogut, P., Kolosov, D., Samusia, V., & Onyshchenko,S. (2019). Rigidity of elastic shell of rubber-cable belt during displacement of cables relatively to drum. E3S Web of Conferences, 109, 00005. https://doi.org/10.1051/e3sconf/201910900005.

19. Symonenko, V., Hrytsenko, L., & Cherniaiev, O. (2016). Organization of non-metallic deposits development by steep excavation layers. Mining of Mineral Deposits, 10(4), 68-73. https://doi.org/10.15407/mining10.04.068.

20. Kravets, V., Samusia, V., Kolosov, D., Bas, K., & Onyshchenko, S. (2020). Discrete mathematical model of travelling wave of conveyor transport. E3S Web of Conferences, 168, 00030. https://doi.org/10.1051/e3sconf/202016800030.

• < Prev
• Next >