Articles

Limitation of oscillations of vibrating machines during start-up and shutdown

User Rating:  / 0
PoorBest 

Authors:

B.V.Vynohradov, Dr. Sc. (Tech.), Prof., orcid.org/0000-0002-9600-0739, State Higher Educational Institution “Ukrainian State University of Chemical Technology”, Dnipro, Ukraine, е-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.I.Samusya, Dr. Sc. (Tech.), Prof., orcid.org/0000-0002-6073-9558, Dnipro University of Technology, Dnipro, Ukraine, е-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

D.L.Kolosov, Dr. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0003-0585-5908, Dnipro University of Technology, Dnipro, Ukraine, е-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Development and justification of a method for limiting resonance vibrations during start-up and shutdown of vibrating machines by using cord-reinforced rubber air springs as elastic elements

Methodology. Viscoelastic models of two systems are considered; the first includes a rubber-cord air spring filled with compressed air and connected to an additional air volume through an orifice plate; the second system incorporates a rubber-cord air spring filled with liquid and connected to a hydropneumatic accumulator through an orifice plate. For these viscoelastic systems, linearized equivalent dynamic diagrams have been presented and differential equations of motion have been formulated. A method of limiting resonance vibrations during the start-up and shutdown of vibrating machines is considered. The effectiveness of limiting the resonance vibrations and forces transmitted to the fixed support structures is studied using the example of a vibrating screen. The worst case is considered when resonance vibrations are of a steady nature. The amplitude-frequency response and coefficients have been obtained, which characterize the dynamic load transmission to the fixed support structures for various viscous resistance forces determined by the orifice plate parameters.

Findings. Equivalent schematic diagrams of viscoelastic systems incorporating rubber-cord air springs and a mathematical model describing the forced vibrations have been developed, a method has been proposed for limiting vibrations and loads transmitted to the fixed support structures during start-up and shutdown of vibrating machines. The effectiveness of the proposed method has been justified.

Originality. It has been scientifically justified that the use of rubber-cord air springs as elastic elements of vibrating machines allows effectively limiting resonance vibrations and dynamic loads transmitted to the structures of fixed supports.

Practical value.This allows limiting resonance vibration amplitude of a vibrating screen and decreasing dynamic loads transmitted to the fixed support structures of vibrating machines.

References.

1. Bogdanov, O. S., 1982. Reference-book on ore processing. V.1. Preparatives. Moscow: Nedra [online]. Available at: <http://www.twirpx.com/file/43616/> [Acce­ssed 11 December 2017].

2. FGUP “FNPTs “Progress”. Pneumoelements with rubber-cord casing: catalog [online]. Available at: <http:// www.progress-omsk.ru/constructor.php?act=group 5> [Accessed 27 September 2017].

3. Firestone Industrial Products Company, LLC–2017, 2017. Firestone air springs: catalogs [online]. Available at: <http://www.progress-omsk.ru/constructor.php?act= group5> [Accessed 25 November 2017].

4. Buryan, Yu. A., Sorokin, V. N., Silkov, M. V. and Galuza, Yu. F., 2015. Hydraulic inertial motion transformer with rubber-cord casing. Omsk Scientific Bulletin, 1(137), pp. 30‒33.

5. Shpachuk, V., Chuprynin, A., Suprun, T. and Garbuz, A., 2018. A multifactor analysis of the rail transport car that passes over a joint unevenness with respect to the phases of its motion. Eastern-European Journal of Enterprise Technologies, 1(7(91)), pp. 55‒61.

6. Kolosov, D., Dolgov, O. and Kolosov, A., 2014. Analytical determination of stress-strain state of rope caused by the transmission of the drive drum traction. In: Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, pp. 499‒504.

7. Manashkin, L. A., Myamlin, S. V. and Prihodko, V. I., 2007. Vibration absorbers and shock isolators of rail carriages (mathematical models). Monograph [pdf]. Available at: <http://www.library.diit.edu.ua/bitstream/ 123456789/328/2/Manashkin_Myamlin_Pri­khod­ko_rus.pdf> [Accessed 30 October 2017].

8. Nemchinov, S. and Khristenko, A., 2018. Stress-strain state of pneumatic flexible shaft coupling for ball mill drives. Scientific Journal of Silesian University of Technology. Series Transport, 99, pp. 125-134.

9. Vinogradov, B. V. and Khristenko, A. V., 2016. Flexible couplings with rubber-cord shells in dual pinion mill drives. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1, pp. 42‒46 .

10. Homišin, J., 2011. Controlling torsional vibration of mechanical systems by application of pneumatic flexible shaft couplings. Zeszyty Naukowe Politechniki Śląskiej,  Transport, 72, pp. 33‒40. DOI: 10.20858/sjsutst.2018.99.12.

11. Bidulya, A. L., Kirikov, A. K., Krasnov, O. G. and Vo­robyov, S. A., Russian Railways, 2010. Shake screen. Russia. Pat. 2394654 [online]. Available at: <http://www.freepatent.ru/patents/2394654 915> [Accessed 11 September 2017].

12. Reydemeyster, A. G., Kivisheva, A. V. and Shykunov, O. A., 2016. Dependence of air spring parameters on throttle resistance. Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 2(62), pp. 148–157.

13. Vinogradov, B. V., 2011. On dynamic characteristics of visco-elastic systems with rubber-cord casing. Vibration in engineering and technology, 1(61), pp. 20–24.

 повний текст / full article



Visitors

6227343
Today
This Month
All days
1175
54020
6227343

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home