Articles
Improving safety of movement of mining transport by applying wheels with counter-flange
- Details
- Category: Geotechnical and mining mechanical engineering, machine building
- Last Updated on 21 May 2017
- Published on 21 May 2017
- Hits: 4841
Authors:
Yu.I.Osenin, Dr. Sc. (Tech.), Prof., Berdiansk University of Management and Business, Berdiansk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
L.M.Dehtiareva, Cand. Sc. (Tech.), Assoc. Prof., Yuri Kondratyuk Poltava National Technical University, Poltava, Ukraine
G.Yu.Osenina, Berdiansk University of Management and Business, Berdiansk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
О.V.Serhiienkо, Cand. Sc. (Tech.), Assoc. Prof., Volodymyr Dahl East Ukrainian National University Severodonetsk, Ukraine
Abstract:
Purpose. Development of a wheel pair with wheels that provide protection against derailment due to counter-flanges and substantiation of efficiency of its applying at mining transport.
Methodology. Mathematical and simulation modelling of geometric, friction and dynamic parameters of contact interaction between the wheel and rail of the proposed wheel pair by applying difference equations, elements of theoretical mechanics, mechanical system dynamics, analytical geometry, etc.
Findings. The authors have proposed scientifically grounded engineering solution for designing the wheel pair that has wheels with counter-flange which satisfies the existing standards of vertical and horizontal dynamics and movement stability index. Results of calculations for coefficients of dynamics and transverse stability for the wheel pair with wheels that have counter-flange are the same as computational data for freight cars with all-rolled wheels over the range of 10–15 % and no more than standard values.
Improved contour of the rail wheel with counter-flange has been developed. It provides the additional contact in horizontal plane while transverse vibrations of the wheel pair relative to rail track and makes carriage more stable and increase the resisting force of the wheel against derailment when passing curved section of line.
Originality. Methods for creating working contour of wheels for special-purpose rolling stock that takes into consideration counter-flange at the rolling surface were further developed. Force interaction patterns of wheel pair with wheels that have counter-flange and side edge of rail top have been obtained for the first time. Relation that describes the influence of transverse force during performance of car on curves at contact of wheel with counter-flange with rail.
Practical value. The authors have developed a wheel pair for mining transport whose contour has the additional running track and counter-flange that protects against derailment when base flange of wheel rolls in working surface of rail or there is way spacer due to rail elastic deformation. The wheel pair design suggested is covered by Ukrainian patents for utility modal.
References
1. Sokolov, O.I., 2007. Road safety is first of all. Railway transport of Ukraine, 2, pp. 69‒70.
2. Kurhan, D.M. and Hubar, O.V., 2016. Assessment of Safety While Ensuring Stability to Mounting of a Wheel Flange on a Rail. Electromagnetic Compatibility and Safety on Railway Transport, 11, pp. 65–72.
3. Cheng, Y.C., Lee, S.Y. and Chen, H. H., 2009. Modeling and nonlinear hunting stability analysis of high-speed railway vehicle moving on curved tracks. Journal of Sound and Vibration, 324(1/2), pp. 139‒160.
4. Diomin, Yu.V. and Cherniak, G.Yu., 2007. Dynamics of the empty car and traffic safety. Railway transport of Ukraine, 3, pp. 50‒52.
5. Hubar, O.V., Khalipova, N.V., Tsyhanenko, V.V. and Rybkin, V.V., 2008. Analysis of investigation files on derailments in curve parts of track in radius of less than 350 m. Visnyk of Dnipropetrovsk National University of Railway Transport named after Academician V.Lazaryan, 24, pp. 94–99.
6. Voronin, S.V., Karpenko, S.S., Volkov, O.V. and Bakin, K.O., 2013. Analysis of works on controlling friction and adhesion in wheel-rail contact. Proc. of Ukrainian State University of Railway Transport, 141, pp. 247–253.
7. Dusza, M., 2015. The wheel-rail contact friction influence on high speed vehicle model stability. Transport problems, 10(3), pp. 73–86.
8. Osenin, Yu.I. and Dehtiareva, L.N. Dahl East Ukrainian National University, 2010. Wheel of the rail vehicle. Ukraine. Pat. 52359, MPK (2010) В60 В3/00, В60 17/00.
9. Dehtiareva, L.M., Miamlin, S.V., Osenin, Yu.I., 2009. Mathematical formulation of wheel-rail force interaction. Visnyk of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, 28, pp. 21–25.
10. Ruban, V.G. and Matva, A.M., 2010. Impact of change of contacting surfaces geometry on conditions of wheel-rail interaction. Proc. of Rostov State Transport University, 16, pp. 88–95.
![]() ![]() |
|
![]() ![]() ![]() |
![]() |