Articles

Analysis of causes of the accidents occurring in process of drilling of big diameter vertical wells

User Rating:  / 1
PoorBest 

Authors:

A.A. Gorelkin, “Spetsshakhtobureniye” Co., Ltd., Engineer, Donetsk, Ukraine

Abstract:

Purpose. To establish regularities of misalignment of vertical shafts and wells of large diameter in the process of drilling in layered rocks of different strengths and to find the ways of maintaining their verticality. Research work aiming the vertical shafts and large-diameter boreholes drilling technology improvement are topical because of contingency situations arising while drilling process through the mining and geological factors. The contingency are divided on accidents and troubles. Accidents are associated with prolonged stoppage of drilling process.

Methodology. The analysis of the contingency causes is to identify those of the most significant influence on the penetration as well as engineering-and-economic performance of production division.

Findings. The analysis of different contingencies occurred on the 500 production entities of “Spetsshakhtobureniye” Co., Ltd. has made it possible to estimate the degree of influence of costs spent on elimination of their aftermath on the level of production profitability and also to develop criteria for assessment of the level of contingency.

Originality. Implementation of the proposed criterion, Contingency Index, allows assessing the impact of costs associated with its elimination on technological process in general and the engineering-and-economic performance of production division.

Practical value. The fulfilled analysis showed that a significant number of contingencies occurred while drilling vertical shafts and large-diameter boreholes may be prevented by maintaining technical and technological discipline. Also, the analysis showed that more attention should be paid to studying the mechanism of interaction between the straight bit and rocks with different strength properties taking into consideration development of technical means ensuring the verticality of constructed mine workings.

References:

1. Пилипець В.І. Буріння стволів шахт та технічних свердловин: підруч. [для студ. вищ. навч. закл.] / Пилипець В.І., Тулуб С.Б., Левіт В.В. – Донецьк: Норд-Прес, 2009. – 559 с.

Pylypets, V.I., Tulub, S.B. and Levit, V.V. (2009), Burinnia stvoliv shakht ta tekhnichnykh sverdlovyn [Drilling of Mine Shafts and Technological Boreholes], Textbook, Nord-Press, Donetsk, Ukraine.

2. Горелкин А.А. О перспективах сооружения стволов и скважин большого диаметра. / Левит В.В., Турчин В.А., Горелкин А.А. // Уголь Украины. – август 2007. – С. 33–36.

Gorelkin, А.А., Levit, V.V. and Тurchin, V.А. (2007), “About perspectives of constructing shafts and large-diameter boreholes”, Ugol Ukrainy, no.8, pp. 33–36.

Files:
2012_5_gorelk
Date 2013-10-17 Filesize 287.85 KB Download 1454

Visitors

6228360
Today
This Month
All days
2192
55037
6228360

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home