Method of determination of hydraulic parameters of process water filter operation
/ 0
- Details
- Category: Geotechnical and mining mechanical engineering, machine building
- Last Updated on 26 December 2012
- Published on 26 December 2012
- Hits: 3851
Authors: V.Yu. Kukhar
Objectives of experimental investigation of process water filtration and regeneration of filter elements in actual external environment have been defined. Adjustment and calibration of experimental test bench for filtration investigations have been described. It has been suggested to determine rational speed of seepage in terms of filtering elements regeneration supply under the pre-set frequency. It has been suggested to determine the period of the filtering elements extreme bridging as the period between the moment when clean filtration element starts operating in “filtration–regeneration” regime and the one when filtrating element pressure fall reaches its critical value. It has been developed the method of determination of hydraulic parameters of filter operation on the basis of the suggested criteria.
Files:
 2010_06 Kuk
|
|
 2012-12-14  200.36 KB  1155 |
|
Newer news items:
- Account taken of channel-length distribution of static pressure in steam-water turbine when testing its energy parameters - 26/12/2012 15:39
- Analytical terms of portable grinder disk balancing by means of roller-type autobalancer on rotating link - 26/12/2012 15:37
- Prospects for development of joints of deep-water vertical pipes of large diameter (reisers). Threaded connections of raisers - 26/12/2012 15:35
Archive