The environmental effectiveness of humate reagent in internal and external hydro-filling of quarries
- Details
- Category: Content №3 2024
- Last Updated on 28 June 2024
- Published on 30 November -0001
- Hits: 2304
Authors:
V.P.Shchokin*, orcid.org/0000-0001-9709-1831, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.V.Pavlychenko, orcid.org/0000-0003-4652-9180, Dnipro University of Technology, Dnipro, Ukraine
V.V.Yezhov, orcid.org/0009-0002-9638-1030, Kryvyi Rih National University, Kryvyi Rih, Ukraine
M.V.Kormer, orcid.org/0000-0002-6509-0794, State University of Economics and Technology, Kryvyi Rih, Ukraine
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2024, (3): 128 - 134
https://doi.org/10.33271/nvngu/2024-3/128
Abstract:
Purpose. To develop an environmentally friendly technology for drilling and blasting operations in quarries that will ensure effective degassing and dust suppression during mass explosions by using a natural humate reagent in internal and external hydro-filling.
Methodology. The study used a set of research methods: analytical – to establish the main technical and economic indicators that affect the cost of drilling and blasting operations; technical and economic analysis – to establish the relationship between the cost of operations, air pollution after massive explosions and types of hydro-fillings and concentrations of humate reagent.
Findings. The paper presents the results of pilot tests of the effectiveness of applying the humate reagent in the preliminary humidification of blocks and its use in internal and external hydro-filling, which leads to a significant reduction in dust formation and degassing of mass explosions. During the period of production research from 2017 to 2021, the environmental efficiency of the use of internal and external hydro-filling with the use of humate reagent TU U 20.5-43384697-001:2020 was confirmed at the enterprises of the Metinvest Holding: PJSC Inhulets Mining and Processing Plant, Pivnichnyi Mining and Processing Plant, Tsentralnyi Mining and Processing Plant, as well as ArcelorMittal Kryvyi Rih, JSC Pivdennyi Mining and Processing Plant and Rudomain LLC. When using an aqueous solution of humate reagent with a concentration of 3 % in internal and external hydro-filling, the environmental effect involves on average: dust suppression – 54 %; neutralization of carbon monoxide – 62 %; neutralization of nitrogen oxides – 55 %. The results of industrial tests have confirmed scientific hypotheses regarding the processes of binding dust particles in the dust and gas cloud, as well as the effect of neutralizing explosive gases.
Originality. Dependences of the concentration of humate reagent in internal and external hydro-filling and binding of dust particles during mass explosions with environmental efficiency in terms of dust and gas suppression were established. Industrial research will allow confirming the scientific hypothesis about the neutralization of CO by a humate reagent in mass explosions, which is based on the Langmuir theory.
Practical value. An eco-oriented technology of drilling and blasting operations in quarries has been developed which is based on using humate reagents in internal and external hydro-filling and allows industrial enterprises using massive explosions to reduce dust, carbon and nitrogen oxide emissions.
Keywords: mass explosions, quarry, hydro-fillings, humate reagent, dust and gas cloud, environmental efficiency
References.
1. Kononenko, M., & Khomenko, O. (2021). New theory for the rock mass destruction by blasting. Mining of Mineral Deposits, 15(2), 111-123. https://doi.org/10.33271/mining15.02.111.
2. Wanjun, T., & Qingxiang, C. (2018). Dust distribution in open-pit mines based on monitoring data and fluent simulation. Environmental Monitoring and Assessment, 190(11), 632. https://doi.org/10.1007/s10661-018-7004-9.
3. Zari, M., Smith, R., & Ferrari, R. (2023). Evaluation of Dust Emission Rate from Landfill Mining Activities. Detritus, 25, 78-89. https://doi.org/10.31025/2611-4135/2023.18328.
4. Wang, Y., Du, C., Wang, J., & Li, H. (2022). Chemical Dust Suppression Technology and Its Applications in Mines (Open-pit Mines). Springer Singapore. https://doi.org/10.1007/978-981-16-9380-9.
5. Cherniaiev, O., Pavlychenko, A., Romanenko, O., & Vovk, Y. (2021). Substantiation of resource-saving technology when mining the deposits for the production of crushed-stone products. Mining of Mineral Deposits, 15(4), 99-107. https://doi.org/10.33271/mining15.04.099.
6. Tverda, O., Kofanova, O., Repin, M., Kofanov, O., Tkachuk, K., Guts, N., & Cabana, E. (2021). A resource efficient and environmentally safe charge structure for mining in an open-pit. Mining of Mineral Deposits, 4(15), 84-0. https://doi.org/10.33271/mining15.04.084.
7. Zabolotny, S. (2023). Monitoring of the Sanitary and Protective Zones of the Iron Ore Quarry of the Northern Mining and Processing Plant. 17 th International Conference Monitoring of Geological Processes and Ecological Condition of the Environment, 1, 1-5. https://doi.org/10.3997/2214-4609.2023520055.
8. Samarakoon, K. G. A. U., Chaminda, S. P., Jayawardena, C. L., Dassanayake, A. B. N., Kondage, Y. S., & Kannangara, K. A. T. T. (2023). A Review of Dimension Stone Extraction Methods. Mining, 3, 516-531. https://doi.org/10.3390/mining3030029.
9. Cevizci, H. (2015). The Environmental and Ecological Effects of the Plaster Stemming Method for Blasting: A case study. Ekoloji, 24(95), 17-22. https://doi.org/10.5053/ekoloji.2015.11.
10. Yi, H., Zhang, X., Yang, H., Li, L., Wang, Y., & Zhan, S. (2023). Controlling toxic and harmful gas in blasting with an inhibitor. PLoS ONE, 18(12), e0291731. https://doi.org/10.1371/journal.pone.0291731.
11. Ptak, M., & Merenda, B. (2016). Emission of pollutants to atmosphere in surface mining operations. Mining science, 23(1), 127-136. https://doi.org/10.5277/MSCMA1622312.
12. Saka, M. B., & Hashim, M. H. M. (2024). Critical assessment of the effectiveness of different dust control measures in a granite quarry. Journal of Public Health Policy, 45, 212-233. https://doi.org/10.1057/s41271-024-00481-6.
13. Huang, Z., Ge, S., Jing, D., & Yang, L. (2019). Numerical simulation of blasting dust pollution in open-pit mines. Applied Ecology and Environmental Research, 17(5), 10313-10333. https://doi.org/10.15666/aeer/1705_1031310333.
14. Fan, L., & Liu, S. (2021). Respirable nano-particulate generations and their pathogenesis in mining work- places: a review. International Journal of Coal Science and Technology, 8(2), 179-198. https://doi.org/10.1007/s40789-021-00412-w.
15. Pysmennyi, S., Chukharev, S., Kyelgyenbai, K., Mutambo, V., & Matsui, A. (2022). Iron ore underground mining under the internal overburden dump at the PJSC Northern GZK. IOP Conference Series: Earth and Environmental Science, 1049 (1), 012008. https://doi.org/10.1088/1755-1315/1049/1/012008.
16. Du, C. F., Wang, J. Z., & Wang, Y. (2022). Study on environmental pollution caused by dumping operation in open pit mine under different factors. Journal of Wind Engineering and Industrial Aerodynamics, 226, 105044. https://doi.org/10.1016/j.jweia.2022.105044.
17. Chaulya, S. K., Tiwary, R. K., Mondal, S. K., Mondal, G. C., Singh, T. B., Singh, S., Singh, R. S., ..., & Singh, K. K. K. (2022). Air Quality Impact Assessment and Management of Mining Activities Around an International Heritage Site in India. Mining, Metallurgy and Exploration, 39(2), 573-590. https://doi.org/10.1007/s42461-022-00547-7.
18. Chen, Z., Du, C., Wang, J., & Wang, Y. (2023). Influence of Recirculation Flow on the Dispersion Pattern of Blasting Dust in Deep Open-Pit Mines. ACS Omega, 8(34), 31353-31364. https://doi.org/10.1021/acsomega.3c03528.
19. Bhullar, M. S., & Pandey, D. C. (2023). Characterization and investigation of PM10 in different area of surface mine. AIP Conference Proceedings, 2521, 020005. https://doi.org/10.1063/5.0112903.
20. Shchokin, V., Yezhov, V., Shchokina, O., & Sobczyk, W. (2023). Methodology for Determining Emissions of Pollutants into Atmospheric Air by Open-Pit Mining Works. Inzynieria Mineralna, 1, 185-188. https://doi.org/10.29227/IM-2023-01-23.
Newer news items:
- Methodological approaches to enterprise security management: traditional and transformed to the conditions of functioning - 28/06/2024 21:21
- Criminal liability for illegal acts with amber: law-making and law-enforcement issues - 28/06/2024 21:21
- Automation of building an individual educational trajectory for a higher education student - 28/06/2024 21:21
- Financial determinants of the post-war reconstruction of the national economy on the principles of the European Green Deal - 28/06/2024 21:21
- Evaluation of the institutional development of innovative activities to ensure the economy of the state - 28/06/2024 21:21
- Personnel potential of industrial enterprises: formation and management - 28/06/2024 21:21
- Identification and suppression of signals of the rear lobe of the radiation pattern of the radar antenna - 28/06/2024 21:21
- Integration of the educational process in higher education with digital technologies - 28/06/2024 21:21
- Data flow management in information systems using blockchain technology - 28/06/2024 21:20
- Improvement of the method for optimization of predicting the efficiency of a robotic platform - 28/06/2024 21:20
Older news items:
- Integrated water resources monitoring system within the structure of environmental safety in southern Ukraine - 28/06/2024 21:20
- Antioxidant properties of brown coal humic substances - 28/06/2024 21:20
- Current tools to control decarbonization in Ukraine both governmentally and locally - 28/06/2024 21:20
- Ecological and geochemical aspects of thermal effects on argillites of the Lviv-Volyn coal basin spoil tips - 28/06/2024 21:20
- Effect of hardened cement waste and fresh cement in the treatment of expansive soil - 28/06/2024 21:20
- Development of the concept for improving the management system of employee safety and health in Ukraine - 28/06/2024 21:20
- Rotor configuration for improved working characteristics of LSPMSM in mining applications - 28/06/2024 21:20
- Designing the functional surfaces of camshaft cams of internal combustion engines - 28/06/2024 21:20
- Endurance calculation of welded joints in tubbing erector mechanism using digital methods - 28/06/2024 21:20
- Effect of circumferential lean of pump-turbine runner blades on energy characteristics - 28/06/2024 21:20