Науковий вісник НГУ

Determination of vertical dynamics for a standard Ukrainian boxcar with Y25 bogies

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №5 2021

Last Updated on 29 October 2021

Published on 30 November -0001

Hits: 5196

Authors:

O.V.Fomin, orcid.org/0000-0003-2387-9946, The State University of Infrastructure and Technologies, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.O.Lovska, orcid.org/0000-0002-8604-1764, The Ukrainian State University of Railway Transport, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (5): 067 - 072

https://doi.org/10.33271/nvngu/2021-5/067

Abstract:

Purpose. To determine the basic dynamic characteristics of a standard Ukrainian boxcar with the Y25 bogie by means of the mathematic modelling of dynamic loads in the vertical plane and to compare them with the dynamic characteristics obtained for a boxcar with the 18100 bogie. It can be used for substantiation of application of the Y25 bogie as more promising, which can improve the operational efficiency of rail transportation and foster integration of the Ukrainian transport system into the European transportation complex.

Methodology. The authors used the mathematical modelling of a boxcar with the Y25 bogie. The research was made in the vertical plane. It was taken into account that an empty car passed over a joint irregularity. The research was made for an 11217boxcar as a predominant type to be used. The authors studied the motion of a car on the 18100 and Y25 bogies. The basic dynamic characteristics were determined for a boxcar with the nominal (design) dimensions of the carrying elements and a boxcar with the actual dimensions (after a long service life) on the basis of the field tests. The differential equations were solved by theRungeKutta method in MathCad software suite. The initial displacements and the speeds were taken equal to zero. The following dynamic characteristics of a boxcar were obtained: acceleration of the body in the center of mass, acceleration of the body in the areas of support on the bogies, forces in the spring suspension of the bogie, and dynamic coefficients of the bogies.

Findings. The theoretical research showed that the basic dynamic characteristics of a boxcar with the nominal dimensions were improved by 3851% in comparison to a similar one with the 18100 bogie, and for a boxcar with the actual dimensions the dynamic characteristics were improved by 4350%.

Originality. The authors substantiated the application of the Y25 bogie for a standard Ukrainian boxcar with the nominal and actual dimensions of the carrying elements by means of the mathematical modelling of the dynamic loads in the vertical plane.

Practical value. Due to lower dynamic loads on the carrying structures of freight cars with the Y25 bogie, it is possible to improve the dynamic characteristics of the structures under the operational modes, to increase the fatigue strength and the operational resource, to decrease the total repair and maintenance costs, to ensure better security and reliability of freight transportation through lower loads on both carrying structures and lashing devices, to increase the speed of freight delivery thanks to better dynamic characteristics of cars, to improve the traffic security, and so on.

Keywords: transport mechanics, boxcar, dynamic loading, bogie, load modelling

References.

1. Myamlin, S., Povilas, L.L., Dailydka, S., Vaiinas, G., Bogdeviius, M., & Bureika, G. (2015). Determination of the dynamic characteristics of freight wagons with various bogie. Transport, 30(1), 88-92. https://doi.org/10.3846/16484142.2015.1020565.

2.Savoskin, A.N., Akishin, A.A., & Yurchenko, D. (2018). Dynamics and optimization of a new double-axle flexible bogie for high-speed trains. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232(5), 1549-1558. https://doi.org/10.1177/0954409717737879.

3. Seyed Milad Mousavi Bideleh, & Berbyuk, V. (2016). Global sensitivity analysis of bogie dynamics with respect to suspension components. Multibody System Dynamics, 37, 145-174.

4. Iwnicki, S.D., Stichel, S., Orlova, A., & Hecht, M. (2015). Dynamics of railway freight vehicles. Vehicle System Dynamics, 53, 995-1033.

5. Uyulan, C., Gokasan, M., & Bogosyan, S. (2017). Dynamic Investigation of the Hunting Motion of a Railway Bogie in a Curved Track via Bifurcation Analysis. Mathematical Problems in Engineering, 2017. https://doi.org/10.1155/2017/8276245.

6. Fomin, O., & Lovska, A. (2020). Establishing patterns in determining the dynamics and strength of a covered freight car, which exhausted its resource. Eastern-European Journal of Enterprise Technologies, 6(7(108)), 21-29. https://doi.org/10.15587/1729-4061.2020.217162.

7. Lovska Alyona, & Fomin Oleksij (2020). A new fastener to ensure the reliability of a passenger coach car body on a railway ferry. Acta Polytechnica, 60(6), 478-485. https://doi.org/10.14311/AP.2020.60.0478.

8. Tatravagonka Poprad (n.d.). Retrieved from http://tatravagonka.sk/bogie/y25lssif-d/?lang=ru.

9. Ignatenkov, G.I., Slesarev, S.I., Romen, Yu.S., Dolmatov, A.A., Belousov, V.N., Tikhonenkov, A.P., & Ojya, V.I. (2006). Railway vehicle bogie. (Russian Federation Patent No. 2099220).

10. Fomin, O., Lovska, A., Masliyev, V., Tsymbaliuk, A., & Burlutski,O. (2019). Determining strength indicators for the bearing structure of a covered wagons body made from round pipes when transported by a railroad ferry. Eastern-European Journal of Enterprise Technologies, 1(7(97)), 33-40. https://doi.org/10.15587/1729-4061.2019.154282.

11. Fomin, O., Lovska, A., Ptk, V., & Kuera, P. (2019). Dynamic load effect on the transportation safety of tank containers as part of combined trains on railway ferries. VIBROENGINEERING PROCEDIA, 29, 124-129. https://doi.org/10.21595/vp.2019.21138.

12. Plakhtii, O., Nerubatskyi, V., Scherbak, Ya., Mashura, A., & Khomenko, I. (2020). Energy efficiency criterion of power active filter in a three-phase network. 2020 IEEE KhPI Week on Advanced Technology (KhPIWeek), 165-170. https://doi.org/10.1109/KhPIWeek51551.2020.9250073.

13. Plakhtii, O., Nerubatskyi, V., Mashura, A., Hordiienko, D., & Khoruzhevskyi, H. (2020). Improving energy indicators of the charging station for electric vehicles based on a three-level active rectifier. Eastern-European Journal of Enterprise Technologies, 3(8(105)), 46-55. https://doi.org/10.15587/1729-4061.2020.204068.

14. Plakhtii, O., Nerubatskyi, V., Khomenko, I., Tsybulnyk, V., & Syniavskyi, A. (2020). Comprehensive study of cascade multilevel inverters with three level cells. 2020 IEEE 7^th International Conference on Energy Smart Systems (ESS), 277-282. https://doi.org/10.1109/ESS50319.2020.9160258.

15. Vatulia, G., Komagorova, S., & Pavliuchenkov, M. (2018). Optimization of the truss beam. Verification of the calculation results. MATEC Web of Conferences, 230, 02037. https://doi.org/10.1051/matecconf/201823002037.

16. Vatulia, G.L., Lobiak, O.V., Deryzemlia, S.V., Verevicheva,M.A., & Orel, Ye.F. (2019). Rationalization of cross-sections of the composite reinforced concrete span structure of bridges with a monolithic reinforced concrete roadway slab. IOP Conference Series: Materials Science and Engineering, 664, 012014. https://doi.org/10.1088/1757-899X/664/1/012014.

17. Kondratiev, A.V., Gaidachuk, V.E., & Kharchenko, M.E. (2019). Relationships between the ultimate strengths of polymer composites in static bending, compression, and tension. Mechanics of Composite Materials, 52(2), 259-266.

18. Dio, J., Steiunas, S., & Blatnick, M. (2016). Simulation analysis of the effects of a rail vehicle running with wheel flat. Manufacturing Technology, 16(5), 889-896.

19.Freight wagons. Requirements for strength and dynamic properties. GOST 33211-2014 (2016). Moscow: Standartinform. Retrieved from http://docs.cntd.ru/document/1200121493.

20 Freight wagons. General requirements for calculations and design of new and modernized wagons of 1520 mm gauge (non-self-propelled). DSTU 7598:2014 (2015). Kyiv. Retrieved from http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=73763.

• < Prev
• Next >