Науковий вісник НГУ

Substantiating the optimal type of mine working fastening based on mathematical modeling of the stress condition of underground structures

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №3 2021

Last Updated on 23 June 2021

Published on 30 November -0001

Hits: 4868

Authors:

A.K.Matayev, orcid.org/0000-0001-9033-8002, Karaganda Technical University, Karaganda, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.H.Lozynskyi, orcid.org/0000-0002-9657-0635, Geological Concern Geobit, Chrzanow, the Republic of Poland

A.Musin, orcid.org/0000-0001-6318-9056, Karaganda Technical University, Karaganda, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

R.M.Abdrashev, orcid.org/0000-0002-2651-5964, Aktobe Regional University named after K.Zhubanov, Aktobe, the Republic of Kazakhstan

A.S.Kuantay, orcid.org/0000-0001-5703-8227, Aktobe Regional University named after K.Zhubanov, Aktobe, the Republic of Kazakhstan

A.N.Kuandykova, orcid.org/0000-0001-7810-7500, Aktobe Regional University named after K.Zhubanov, Aktobe, the Republic of Kazakhstan

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (3): 057 - 063

https://doi.org/10.33271/nvngu/2021-3/057

Abstract:

Purpose. Predicting the formation of a stress-strain state (SSS) in the rock mass within the boundaries of influence of stope operations on the horizon -480 m in axes 2028 at the 10^th Anniversary of Kazakhstans Independence (DNK) Mine.

Methodology. An engineering-geological data on the host rocks properties are analyzed based on the international ISRM standard. Numerical modelling of the rock mass stress-strain state and the calculation of the load-bearing capacity of the compound support (roof-bolt+shotcrete+mesh) and arch support used at the mine are performed with the help of the RS2 software. This program, based on the Finite Element Method in a two-dimensional formulation, makes it possible to take into account a significant number of factors influencing the rock mass state.

Findings. The calculations performed indicate that the support resistance is incommensurably low in comparison with the values of the initial stress field components in the rock mass. In such conditions, it may be more effective to strengthen the mass in the vicinity of mine working than setting more frames or using more massive support profiles.

Originality. The paper presents the results of mathematical modeling and calculation of the stress-strain state of the underground supporting aquifer rock mass structures developed for complex mining-and-geological and geomechanical conditions of driving, supporting and operating mine workings on deep horizons of the mines at Donskoy Ore Mining and Processing Plant. Based on the performed research, the preliminary (advanced) strengthening of the border rock mass in the zone of inelastic (destructive) deformations has been substantiated, as a priority method to control the stability of mine workings.

Practical value. The research results can be used when creating a geomechanical model of the field and designing stable parameters of mine working support.

Keywords: mine, mine working fastening, stress-strain state, zone of inelastic deformations, frame support

References.

1. Abdiev, A., Mambetova, R., Abdiev, A., & Abdiev, S. (2020). Development of methods for assessing the mine workings stability. E3S Web of Conference, (201), 01040. https://doi.org/10.1051/e3sconf/202020101040.

2. Balek, A.E., & Panzhin, A.A. (2017). The solution of problems of geomechanical maintenance of underground mining at chromite deposits of Donskoy Mining Processing Plant. Innovatsionnye geotekhnologii pri razrabotke rudnykh i nerudnykh mestorozhdeniy, (18), 241-249. Retrieved from http://www.ursmu.ru/upload/doc/2018/11/30/sbornik_ingeo-2017.pdf#page=241.

3. Sultanov, M.G., Mataev, A.K., Kaumetova, D.S., Abdrashev,R.M., & Kuantay, A.S. (2020). Development of the choice of types of support parameters and technologies for their construction at the Voskhod field. Ugol, (10), 17-21. https://doi.org/10.18796/0041-5790-2020-10-17-21.

4. Abdiev, A.R., Mambetova, R.S., & Mambetov, S.A. (2017). Geomechanical assessment of Tyan-Shans mountains structures for efficient mining and mine construction. Gornyi Zhurnal, (4), 23-28. https://doi.org/10.17580/gzh.2017.04.04.

5. Rysbekov, K., Toktarov, A., Kalybekov, T., Moldabayev, S., Yessezhulov, T., & Bakhmagambetova, G. (2020). Mine planning subject to prepared ore reserves rationing. E3S Web of Conference, (168), 00016. https://doi.org/10.1051/e3sconf/202016800016.

6. Lozynskyi, V., Medianyk, V., Saik, P., Rysbekov, K., & Demydov,M. (2020). Multivariance solutions for designing new levels of coal mines. Rudarsko Geolosko Naftni Zbornik, 35(2), 23-32. https://doi.org/10.17794/rgn.2020.2.3.

7. Matayev, A.K., Kainazarova, A.S., Arystan, I.D., Abeuov, Ye., Kainazarov, A.S., Baizbayev, M.B., Demin, V.F., & Sultanov, M.G. (2021). Research into rock mass geomechanical situation in the zone of stope operations influence at the 10^th Anniversary of Kazakhstans Independence mine. Mining of Mineral Deposits, 15(1), 1-10. https://doi.org/10.33271/mining15.01.042.

8. Arystan, I.D., Baizbaev, M.B., Mataev, A.K., Abdieva, L.M., & Bogzhanova, Z.K. (2020). Selection and justification of technology for fixing preparatory workings in unstable massifs on the example of the mine 10 years of Independence of Kazakhstan. Ugol, (06), 10-14. https://doi.org/10.18796/0041-5790-2020-6-10-14.

9. Dychkovskyi, R., Shavarskyi, Ia., Saik, P., Lozynskyi, V., Falshtynskyi, V., & Cabana, E. (2020). Research into stress-strain state of the rock mass condition in the process of the operation of double-unit longwalls. Mining of Mineral Deposits, 14(2), 85-94. https://doi.org/10.33271/mining14.02.085.

10. Bondarenko, V., Kovalevska, I., Svystun, R., & Cherednichenko,Y. (2013). Optimal parameters of wall bolts computation in the united bearing system of extraction workings frame-bolt support. Annual Scientific-Technical Colletion Mining of Mineral Deposits, 5-10. https://doi.org/10.1201/b16354-2V.

11. Piwniak, G.G., Bondarenko, V.I., Salli, V.I., Pavlenko, I.I., & Dychkovskiy, R.O. (2007). Limits to economic viability of extraction of thin coal seams in Ukraine. Technical, Technological and Economic Aspects of Thin-Seams Coal Mining International Mining Forum 2007, 129-132. https://doi.org/10.1201/noe0415436700.ch16.

12. Makowski, P., Niedbalski, Z., Majcherczyk, T., & Bednarek, . (2020). Underground monitoring as the best way of roadways support design validation in a long time period. Mining of Mineral Deposits, 14(3), 1-14. https://doi.org/10.33271/mining14.03.001.

13. Kuanyshbekovna, M.M., Krupnik, L., Koptileuovich, Y.K., Mukhtar, E., & Roza, A. (2016). The system is roof bolting-mountain. International Journal of Applied Engineering Research, 11(21), 10454-10457.

14. Sun, S., Li, S., Li, L., Shi, S., Wang, J., Hu, J., & Hu, C. (2018). Slope stability analysis and protection measures in bridge and tunnel engineering: a practical case study from Southwestern China. Bulletin of Engineering Geology and the Environment, 78(5), 3305-3321. https://doi.org/10.1007/s10064-018-1362-y.

15. Dinh, V.D., Do, N.A., Bruland, A., & Dias, D. (2020). Estimating the Radial Displacement on the Tunnel Boundary within Efficient Working Area of Rock Tunneling Quality Index (Q-System). Proceedings of the International Conference on Innovations for Sustainable and Responsible Mining, 81-90. https://doi.org/10.1007/978-3-030-60839-2_5.

16. Kumar, S., & Pandey, H.K. (2021). Slope Stability Analysis Based on Rock Mass Rating, Geological Strength Index and Kinematic Analysis in Vindhyan Rock Formation. Journal of the Geological Society of India, 97(2), 145-150. https://doi.org/10.1007/s12594-021-1645-y.

17. Baibatsha, A., Dussembayeva, K., Bekbotayeva, A., & Abdullayeva, M.T. (2018). Tails of enrichment factories as the technogenic mineral resources. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 18(1), 519-526. https://doi.org/10.5593/sgem2018/1.1/s01.066.

18. Omarova, G., Baibatsha, A., & Abdykirova, G.Z. (2019). Flotation enrichment of enrichment factory tailings for use as technogenic ore. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 19(1), 195-202. https://doi.org/10.5593/sgem2019/1.1/s01.024.

19. Khomenko, O., Kononenko, M., & Petlyovanyy, M. (2014). Investigation of stress-strain state of rock massif around the secondary chambers. (2014). Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 253-258. https://doi.org/10.1201/b17547-43.

20. Galiyev, D.A., Uteshov, E.T., & Tekenova, A.T. (2020). Digitalization of technological and organizational processes of mining operations due to the implementation of the installation system and accounting the key indicators. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 5(443), 47-53.

21. Abdiev, A., Mambetova, R., Abdiev, A., & Abdiev, Sh. (2020). Studying a correlation between characteristics of rock and their conditions. Mining of Mineral Deposits, 14(3), 87-100. https://doi.org/10.33271/mining14.03.087.

• < Prev
• Next >