Optimization of technological specifications and methodology of estimating the efficiency of the bulk cargoes delivery process
- Details
- Category: Information Technologies
- Last Updated on 29 June 2019
- Published on 16 June 2019
- Hits: 3626
Authors:
N.Y.Shramenko, Dr. Sc. (Tech.), Prof., orcid.org/0000-0003-4101-433X, Kharkiv Petro Vasylenko National Technical University of Agriculture, Kharkiv, Ukraine, Ukrainian State University of Railway Transport, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.О.Shramenko, orcid.org/0000-0002-3551-6942, V. N. Karazin Kharkiv National University, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract:
Purpose. To increase the efficiency of the process of bulk cargo delivery by exit routes by optimizing the technological parameters of the supply chain.
Methodology. The optimization of the technological parameters of the supply chain for cargo delivery was carried out using mathematical modeling. To assess the effectiveness of the process of cargo delivery, an analytical method of research was applied.
Findings. As a result of the research, optimum values of the technological parameters of the production and transportation chain of ore cargo delivery by exit routes were obtained: the composition of the formed route is 38 cars, the loading point performance is 324.2 t/h, the delivery interval is 1.75 days. Using the optimal technological parameters of the supply chain for the delivery of bulk cargoes by exit routes, the operational work of the railway transport is planned, ensuring compliance with the delivery interval for the purpose of implementing the requirement “just in time”. The dependences of the specific costs of these parameters, which allow evaluating the nature of their changes in various given conditions, are constructed.
Originality. The components of the economic effect of the supply chain for the delivery of bulk cargoes (coal, ores, etc.) by means of exit routes have been formalized and a method for evaluating the economic effect for both subjects of the supply chain is proposed: the owner of cars and production.
Practical value. Recommendations on the formation of the technological process of functioning of the entire supply chain are given for given values of the duration of the supplier’s and customer’s production cycles, the duration of transportation, the intensity of the input of the delivered raw materials into production. To improve the efficiency of delivery of bulk goods, it is recommended to use the developed schedules of interaction between production, transport and consumption. At the same time, the intensity of raw materials receipt into production determines the optimal composition of the formed exit route and the delivery interval.
References.
1. Fedorovich, V. O., & Kubrak, N. А. (2014). An analysis of economic conditions and factors contributing to improving the efficiency of freight transport in the perspective of organizing technological outsourcing. Bulletin of Tomsk State University. Economy, 3(27), 66-78.
2. Moroz, M. M. (2015). Defining the term and the volume of investments on reduction to necessary structure of rolling stock of passenger public transport (Kremenchuk city case study). Actual Problems of Economics, 166(4), 235–243.
3. Zharkova, A. A., & Druzhinina, M. G. (2017). Model of the organization of transportation of bulk cargo in the industrial region. High technologies of development and use of mineral resources, 3, 265-268.
4. Muzylyov, D. А., Kravcov, А. G., Karnayh, N. V., Berezhnaja, N. G., & Kutiya, О. V. (2016). Development of a methodology for choosing conditions of interaction between harvesting and transport complexes. Eastern European Journal of Enterprise Technologies, 2(3), 11-21. DOI: 10.15587/1729-4061.2016.65670.
5. Shramenko, N. Y. (2015). Effect of process-dependent parameters of the handling-and-storage facility operation on the cargo handling cost. Eastern European Journal of Enterprise Technologies, 5/3(77), 43-47. DOI: 10.15587/1729-4061.2015.51396.
6. Shatrova, K. I. (2016). The experience of foreign countries in the formation of transport and logistics systems. Public administration and customs administration, 1(14), 90-100.
7. Burmistrova, O. N., Sushkov, S. I., & Pilnik, Yu. N. (2015). Optimization of parameters of transport processes at the enterprises of the timber industry complex. Fundamental research, 11(2), 237-241.
8. Kuzubov, A. A. (2017). System features inventory management in the logistics system business. Azimuth of Scientific Research: Economics and Administration, 6(4(21)), 137-140.
9. Verlan, A. I. (2013). Perfection of methods for stimulating sender routing on railway transport. Science and Transport Progress: Bulletin of Dnipropetrovsk National University of Railway Transport after academician V. Lazaryan, 49, 75-85.
10. Verlan, A. I., Pinchuk, E. P., & Zhuravel, I. L. (2014). Improving the methods of technical and economic assessment of the efficiency of cargo transportation by sender routes. Coll. of sci. works of DSURT after academician V. Lazaryan, 7, 10-14.
11. Nefyodova, Y. I., & Bulgakova, J. V. (2013). Modeling of management processes in integrated production and transportation system. Bulletin of the Azov State Technical University. Series: Technical Sciences, 27, 205-213.
12. Shamis, V. A., & Mochalin, M. S. (2016). Some aspects of functioning of transport and logistic processes. Modern technics and technologies, 11(1). Retrieved from http://technology.snauka.ru/2016/11/10897.
13. Shramenko, N. Y. (2017). Evaluation of the effectiveness of piggyback traffic in the context of creating transport and logistics clusters.Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 6(162), 151-155.
14. Shramenko, N. Y. (2016). Methodology for evaluation of synergy effect in terminal cargo delivery system. Actual Problems of Economics, 8(182), 439-444.
15. Taran, I., Turpak, S., Fomin, О., & Tretyak, О. (2018). Logistik technology to deliver raw material for metallurgical production. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1(163), 162-169. DOI: 10.29202/nvngu/2018-1/3.
16. Parunakajn, V. E., & Maslak, G. V. (2017). Increase of production and transport co-operation efficiency in the material traffic at metallurgical enterprises.Bulletin of the Azov State Technical University. Series: Technical Sciences, 35, 237-244.
17. Baramidze, M., Lekveishvili, G., & Gogiashvili, P. (2016). Methods of evaluating the performance of transportation companies using the principle of logistics. YEAR XXIV, 2, 56-58.
18. Shamis, V. A., & Mochalin, M. S. (2016). Analysis of indicators of efficiency of transport and logistic processes. Modern technics and technologies, 12(1). Retrieved from http://technology.snauka.ru/2016/12/10903.
19. Belozerova, I. G. (2013). The economic effect arising from the improvement of the system of planning the transportation of goods. Engineering Bulletin of the Don, 26(3(26)). Retrieved from https://cyberleninka.ru/article/n/ekonomicheskiy-effekt-voznikayuschiy-pri-sovershenstvovanii-sistemy-planirovaniya-perevozok-gruzov.
20. Shramenko, N. Y., & Shramenko, V. O. (2018). Mathematical model of the logistics chain for the delivery of bulk cargo by rail transport. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 5(167), 136-141. DOI: 10.29202/nvngu/2018-5/15.
Older news items:
- Determination of distribution of introduced energy by volume of ore-thermal furnace - 16/06/2019 21:41
- Control regularities of the useful mineral extraction from ore feed stream with autogenous grinding. Spectral analysis - 16/06/2019 21:39
- Analysis of how the properties of structured data can influence the way these data are processed - 16/06/2019 21:36
- Automation of the control process of the mining machines based on fuzzy logic - 16/06/2019 21:34