Inner shear resistance increasing effect of Concrete Canvas in ballasted railway tracks
/ 0
- Details
- Category: Content №2 2023
- Last Updated on 28 April 2023
- Published on 30 November -0001
- Hits: 3502
Authors:
B.Eller, orcid.org/0000-0001-7253-1757, Széchenyi István University, Győr, Hungary; University of Pécs, Pécs, Hungary
S.Szalai, orcid.org/0000-0001-6440-1135, Széchenyi István University, Győr, Hungary
M.Sysyn, orcid.org/0000-0001-6893-0018, Institute of Railway Systems and Public Transport, TU Dresden, Dresden, Federal Republic of Germany
D.Harrach, orcid.org/0000-0003-4819-8506, Széchenyi István University, Győr, Hungary
J.Liu, orcid.org/0000-0002-4779-7761, Southwest Jiaotong University, Chengdu, the People’s Republic of China
S.Fischer*, orcid.org/0000-0001-7298-9960, Széchenyi István University, Győr, Hungary, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (2): 064 - 070
https://doi.org/10.33271/nvngu/2023-2/064
Abstract:
Purpose. To prove that the GCCM (geosynthetic cementitious composite mat) – type Concrete Canvas (CC) – is an adequate supplementary layer on the top of the subgrade. As its drainage function is known, this article tries to prove the reinforcement possibility. This layer is relatively thin; nevertheless, it can behave like the geogrids. It is the main path to finding out the opportunity of the interlocking effect and its impact on the railway ballast’s inner shear resistance.
Methodology. The laboratory measurements were performed in a multi-level shear box, which allows simulating the multi-level shift of the ballast layer. The tests were planned with and without the CC layer. After shearing, the samples were also tested for load-bearing capacity (E2; according to the Hungarian Standard) and particle breakage. On the other hand, the contact surface between the lowest part of the ballast and CC was also measured by a sophisticated 3D laser scanner (GOM ATOS) and graphically by AutoCAD software.
Findings. After the results of the laboratory experiments are analyzed, the following parameters are calculated and determined: 1) the reinforcement ratio as the tangent of the inner shear resistance curves in the 5–15 mm horizontal shearing interval as well as the area under graphs by integration in the 0–40 mm interval; 2) the change in load-bearing capacity of the layer-structure with and without CC; 3) the amount of the cement particles; 4) the amount of the broken particles; 5) contact surface between the lowest layer of ballast and CC; 6) flatness of CC sheets after shearing. Based on the results, the Concrete Canvas provides significant reinforcement to the railway ballast.
Originality. Any other type of measurement with Concrete Canvas in a multi-level shear box is unknown. The topic is unique.
Practical value. In the future, these results may provide baseline data to verify the suitability of the Concrete Canvas in the railway sub- or superstructure for various types of transport.
Keywords: railway, deterioration, concrete canvas, ballasted track, inner shear resistance, interlocking effect, GOM ATOS
References.
1. European Commission, Mobility and Transport (2022, November 30). Retrieved from https://transport.ec.europa.eu/transport-themes/infrastructure-and-investment_en.
2. Wang, L., Song, Y., Zhang, W., & Ling, X. (2023). Condition-based inspection, component reallocation and replacement optimization of two-component interchangeable series system. Reliability Engineering & System Safety, 230, 108907. https://doi.org/10.1016/j.ress.2022.108907.
3. Goodarzi, S., Kashani, H. F., Oke, J., & Ho, C. L. (2022). Data-driven methods to predict track degradation: A case study. Construction and Building Materials, 344, 128166. https://doi.org/10.1016/j.conbuildmat.2022.128166.
4. Kovalchuk, V. V., Sysyn, M. P., Hnativ, Y. M., Onyshchenko, A., Koval, M., Tiutkin, O. L., & Parneta, M. (2021). Restoration of the bearing capacity of damaged transport constructions made of corrugated metal structures. Baltic Journal of Road and Bridge Engineering, 16(2), 90-109. https://doi.org/10.7250/bjrbe.2021-16.529.
5. Sysyn, M., Gerber, U., Kluge, F., Nabochenko, O., & Kovalchuk, V. (2020). Turnout remaining useful life prognosis by means of on-board inertial measurements on operational trains. International Journal of Rail Transportation, 8(4), 347-369. https://doi.org/10.1080/23248378.2019.1685918.
6. Wang, X., Ding, Y., Zhao, J., Ji, L., Mao, C., & Zhuang, Y. (2023). Feasibility study on the solution of replacing track slab with lateral pushing rail in one maintenance window time. Construction and Building Materials, 362, 129658. https://doi.org/10.1016/j.conbuildmat.2022.129658.
7. Kurhan, M., Kurhan, D., & Hmelevska, N. (2022). Maintenance Reliability of Railway Curves Using Their Design Parameters. Acta Polytechnica Hungarica, 19(6), 115-127. https://doi.org/10.12700/APH.19.6.2022.6.9.
8. Kuchak, A. J. T., Marinkovic, D., & Zehn, M. (2020). Finite element model updating – Case study of a rail damper. Structural Engineering and Mechanics, 73(1), 27-35. https://doi.org/10.12989/sem.2020.73.1.027.
9. Kuchak, A. J. T., Marinkovic, D., & Zehn, M. (2021). Parametric Investigation of a Rail Damper Design Based on a Lab-Scaled Model. Journal of Vibration Engineering and Technologies, 9(1), 51-60. https://doi.org/10.1007/s42417-021-00341-7.
10. Macura, D., Laketić, M., Pamučar, D., & Marinković, D. (2022). Risk Analysis Model with Interval Type-2 Fuzzy FMEA – Case Study of Railway Infrastructure Projects in the Republic of Serbia. Acta Polytechnica Hungarica, 19(3), 103-118. https://doi.org/10.12700/APH.19.3.2022.3.9.
11. Naumov, V., Zhamanbayev, B., Agabekova, D., Zhanbirov, Z., &
Taran, I. (2021). Fuzzy-logic approach to estimate the passengers preference when choosing a bus line within the public transport system. Communications – Scientific Letters of the University of Žilina, 23(3), A150-A157. https://doi.org/10.26552/com.C.2021.3.A150-A157.
12. Saukenova, I., Oliskevych, M., Taran, I., Toktamyssova, A., Aliakbarkyzy, D., & Pelo, R. (2022). Optimization of schedules for early garbage collection and disposal in the megapolis. Eastern-European Journal of Enterprise Technologies, 1(3-115), 13-23. https://doi.org/10.15587/1729-4061.2022.251082.
13. Milosevic, M., Pålsson, B., Nissen, A., Johansson, H., & Nielsen, J.C.O. (2023). Model-Based Remote Health Monitoring of Ballast Conditions in Railway Crossing Panels. In: Rizzo, P., Milazzo, A. (eds) European Workshop on Structural Health Monitoring. EWSHM 2022. Lecture Notes in Civil Engineering, 253. Springer, Cham. https://doi.org/10.1007/978-3-031-07254-3_51.
14. Czinder, B., Vásárhelyi, B., & Török, Á. (2021). Long-term abrasion of rocks assessed by micro-Deval tests and estimation of the abrasion process of rock types based on strength parameters. Engineering Geology, 282, 105996. https://doi.org/10.1016/j.enggeo.2021.105996.
15. Szabó, B., Pásthy, L., Orosz, Á., & Tamás, K. (2022). The Investigation of Additively Manufacturing and Moldable Materials to Produce Railway Ballast Grain Analogs. Frattura ed Integrità Strutturale, 60, 213-228. https://doi.org/10.3221/IGF-ESIS.60.15.
16. Rao, P. K. V., Varma, G. R. P., & Vivek, K. S. (2022). Structural dynamic analysis of freight railway wagon using finite element analysis. Materials Today: Proceedings, 66(3), 967-974. https://doi.org/10.1016/j.matpr.2022.04.770.
17. Sweta, K., & Hussaini, S. K. K. (2022). Role of particle breakage on damping, resiliency and service life of geogrid-reinforced ballasted tracks. Transportation Geotechnics, 37, 100828. https://doi.org/10.1016/j.trgeo.2022.100828.
18. Koohmishi, M. (2021). Assessment of strength of individual ballast aggregate by conducting point load test and establishment of classification method. International Journal of Rock Mechanics and Mining Sciences, 141, 104711. https://doi.org/10.1016/j.ijrmms.2021.104711.
19. Taran, I. A., & Klimenko, I. Yu. (2014). Transfer ratio of double-split transmissions in case of planetary gear input. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 60-66.
20. Samorodov, V., Bondarenko, A., Taran, I., & Klymenko, I. (2020). Power flows in a hydrostatic-mechanical transmission of a mining locomotive during the braking process. Transport Problems, 15(3), 17-28. https://doi.org/10.21307/TP-2020-030.
21. Fischer, S. (2017). Breakage test of railway ballast materials with new laboratory method. Periodica Polytechnica Civil Engineering, 61(4), 794-802. https://doi.org/10.3311/PPci.8549.
22. Eller, B., Movahedi Rad, M., & Fischer, S. (2022). Laboratory Tests and FE Modeling of the Concrete Canvas, for Infrastructure Applications. Acta Polytechnica Hungarica, 19(3), 9-20. https://doi.org/10.12700/APH.19.3.2022.3.2.
23. Szalai, S., Eller, B., Juhász, E., Movahedi, M. R., Németh, A., Harrach, D., Baranyai, G., & Fischer, S. (2022). Investigation of deformations of ballasted railway track during collapse using the Digital Image Correlation Method (DICM). Reports in Mechanical Engineering, 3(1), 258-282. https://doi.org/10.31181/rme20016032022s.
24. Hungarian Standards Institute (2003). MSZ EN 13450:2003. Aggregates for railway ballast. Retrieved from https://ugyintezes.mszt.hu/webaruhaz/szabvanyadatok?standard=109857.
25. R-Design Studio (2022, November 30). Metrology. Retrieved from http://http://r-design.hu/.
26. Lichtberger, B. (2005). Track compendium. Eurailpress Tetzlaff-Hestra GmbH & Co. KG, Hamburg.
27. International Organization for Standardization (2017). ISO 1101:2017. Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out. Retrieved from https://www.iso.org/obp/ui#iso:std:iso:1101:ed-4:v1:en.
Newer news items:
- Increasing the efficiency of using backline and private railway infrastructure in the conditions of the transportation market - 28/04/2023 00:36
- Phenol adsorption onto olive pomace activated carbon: modelling and optimization - 28/04/2023 00:36
- Theoretical and legal aspects of the regulation of environmental and land legal relations in the conditions of martial law in Ukraine - 28/04/2023 00:36
- Social responsibility for the safety and health of employees at work - 28/04/2023 00:36
- Improving the process of occupational risk management according to the Haddon matrix - 28/04/2023 00:36
- Improving the environmental efficiency of glass furnace chimneys using heat recovery technologies - 28/04/2023 00:36
- Investment management and financial development in infrastructure renovation of a sustainable-built environment - 28/04/2023 00:36
- Peculiarities of thermomodernization of the heating system of military infrastructure complexes - 28/04/2023 00:36
- Predicting of vertical displacements of structures of engineering buildings and facilities - 28/04/2023 00:36
- The influence of the impeller design features on the combined operating process of the torque-flow pump - 28/04/2023 00:36
Older news items:
- Contact tensions under the sole of rigid deep laying foundations and ground anchors - 28/04/2023 00:36
- Patterns of air mixture movement in the operating area for the annular ejector of pneumatic transportation system - 28/04/2023 00:36
- Using nonlinear ultrasonic measurements to estimate parameters of the sedimentation of slurry solid phase in thickener - 28/04/2023 00:36
- Selection of the means of auxiliary transportation facilities and adaptation of their parameters to specific operation conditions - 28/04/2023 00:36
- Influence of underground mining activities on the topographic surface, case study of Nui Beo Coal Mine (Vietnam) - 28/04/2023 00:36
- Determining technological properties of drilling muds - 28/04/2023 00:36
- Geology, magmatism and specific features of mineralization of Bakyrchik ore field (Eastern Kazakhstan) - 28/04/2023 00:36
- An approach for ranking abandoned mines by the efficient use of their geothermal potential - 28/04/2023 00:36
- Connection of Kryvbas tectonics with natural and technogenic seismicity - 28/04/2023 00:36
