Mathematical 3D-modeling in the formation process of the overhauled surfaces in the repair industry
/ 0
- Details
- Category: Content №2 2022
- Last Updated on 30 April 2022
- Published on 30 November -0001
- Hits: 4000
Authors:
V.V.Protsiv, orcid.org/0000-0002-2269-4993, Dnipro University of Technology, Dnipro, Ukraine, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.U.Grigorenko, orcid.org/0000-0002-1809-2842, Dnipro University of Technology, Dnipro, Ukraine, email: gvu135gvu@ i.ua
H.O.Veremei, orcid.org/0000-0002-9319-1680, Chernihiv Polytechnic National University, Chernihiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (2): 124 - 128
https://doi.org/10.33271/nvngu/2022-2/124
Abstract:
Purpose. Mathematical representation of the geometry of the overhauled valve seat surfaces in the shape-forming process in the auto repair industry.
Methodology. The research methods were based on: the theory of cutting and metalworking scientific positions, theoretical foundations of the technology of mechanical engineering and overhaul repairs; the basics of technical operation and vehicle structure; provisions of standardization, technical measurements; means of mathematical modelling, statistics and programming.
Findings. The geometric 3D-model of the processing surfaces of valve seats has been presented, which is used in the overhaul process of these parts, which is basic in the general model of the shape-forming system, which allows controlling the shaping parameters with the required precision due to the structure of the model itself and introducing the results of processing particular models: interpolation (to assess the worn surfaces state) and optimization (for determining the volume of cut material and setting cutting conditions).
Originality. For the first time a particular mathematical 3D-model of the general shape-forming system has been developed, consisting of other particular mathematical models (interpolation and optimization), which gives a geometric representation of the processed valve seat surfaces within their overhaul in the auto repair industry.
Practical value. The proposed mathematical 3D-model allows:
- implementing the shape-forming process adequately within the simultaneous boring of three inner conical surfaces by copying with a profile cutting plate, which provides the required parameters of precision and quality of processing during the valve seats overhaul;
- implementing the results of the flaw detection process of worn surfaces of valve seats with a complex-variable topography due to usage of the of roundness- and profile-diagrams and method based on an interpolation geometric 3D-model;
- introducing an optimization model to determine the optimal volumes of cut material and the rational cutting modes select.
The MathCAD software package has been developed, which allows having a graphical performance of the formed surface based on the interpolation model.
Keywords: processed valve seat surfaces, shape-forming process and function, cutting modes in metalworking, precision and quality parameters of processing, valve seat overhaul
References.
1.Cherneta, O.H. (2021). Features of the microstructure of the renewed surface ball parts from steel 45 for boron and laser processing. Perspective technologies and devices, (17), 155-160. https://doi.org/10.36910/6775-2313-5352-2020-17-23.
2.Holovko, L.F., Radko, O.V., Skuratovskiy, A.K., & Saliy, S.S. (2019). Energy saving technologies for changing the working surfaces of machine parts. Problems of Friction and Wear, (4(85)), 55-60. https://doi.org/10.18372/0370-2197.4(85).13871.
3.Senin, P.V., Rakov, N.V., & Makeiykin, A.V. (2019). Assessment of the technical condition of the cylinder heads of the ZMZ-406 engine and recommendations for its restoration. Perm Agrarian Bulletin, 2(26), 24-33.
4. Danilov, I.K., & Popova, I.M. (2017). Analysis of methods, development and economic justification of a diagnostic tool for the cylinder-piston group of an internal combustion engine. Truck, 12, 19-22.
5. Didyk, R.P., & Kozechko, V.A. (2016). Forming of multilayer constructions by explosion welding. Chernye Metally, (7), 66-70. Retrieved from http://rudmet.com/journal/1546/article/26547/.
6. Dudnikov, A., Dudnikov, I., Dudnik, V., & Burlaka, O. (2021). Ways of renewal of parts of agricultural machinery. Bulletin of the Poltava State Agrarian Academy, (6), 280-285. https://doi.org/10.31210/visnyk2021.02.37.
7. Bohdanov, O., Protsiv, V., Derbaba, V., & Patsera, S. (2020). Model of surface roughness in turning of shafts of traction motors of electric cars. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 41-45. https://doi.org/10.33271/nvngu/2020-1/041.
8. Veremey, G.A. (2016). Analysis of the efficiency of the valve seat restoration process in car repair production. Bulletin of Chernihiv National Technological University. Technical Sciences Series, 1(3), 44-49.
9. Veremey, G.A. (2021). Ensuring accuracy in the restoration of valve seats in car repair production. Bulletin of Polotsk State University. Series B, 3(43), 33-41.
10. Kalchenko, V., Kolohoyda, A., Kuzhelniy, Ya., & Morochko, V. (2018). One-pass finishing grinding with crossed axes of a circle and a cylindrical detail. Technical sciences and technologies, 9-17. https://doi.org/10.25140/2411-5363-2018-4(14)-9-17.
11. Klimenko, S.A. (2017). Finishing surfaces in the production of parts. Belarusian Navuka, 376.
12. Yanushkin, A.S., Sekletina, L.S., Hartfelder, V.A., & Lobanov,D.V. (2018). Model and calculation of the adhesion energy of the contact interaction of the tool and workpiece materials. Vesnik IrHTU. 12(143), 125-134. https://doi.org/10.21285/1814-3520-2018-12-125-134.
13. Bohutskiy, V.B. (2019). Comparative analysis of the process of grinding flat surfaces with wheels with intermittent and continuous working profile. Bulletin of Modern Technologies, 4(16), 36-41.
14.Ermolaev, V.K. (2017). Grinding aerospace parts. The rhythm of mechanical engineering, 2, 26-32. Retrieved from https://www.researchgate.net/publication/341992241_Slifovanie_aerokosmiceskih_detalej.
15. Eder, S.J., Leroch, S., Grtzmacher, P.G., Spenger, T., & Heckes,H. (2016). A multiscale simulation approach to grinding ferrous surfaces for process optimization. International journal of mechanical sciences, V.194, 5-15. https://doi.org/10.1016/j.ijmecsci.2020.106186.
16. Taran, I., & Klymenko, I. (2017). Analysis of hydrostatic mechanical transmission efficiency in the process of wheeled vehicle braking. Transport Problems, 12(Special Edition), 45-56.
17. Geng, Z., Tong, Z., & Jiang, X. (2021). Review of geometric error measurement and compensation techniques of ultra-precision machine tools. Advanced Manufacturing, 2(2), 211-227. https://doi.org/10.37188/lam.2021.014.
18. Samorodov, V., Bondarenko, A., Taran, I., & Klymenko, I. (2020). Power flows in a hydrostatic-mechanical transmission of a mining locomotive during the braking process. Transport Problems, 15(3), 17-28. https://doi.org/10.21307/tp-2020-030.
19. Naumov, V., Taran, I., Litvinova, Z., & Bauer, M. (2020). Optimizing resources of multimodal transport terminal for material flow service. Sustainability (Switzerland), 12(16), 6545. https://doi.org/10.3390/su12166545.
20. Protsiv, V.V., & Monya, A.G. (2003). Experimental determination of characteristics of clutch of mine locomotive under the braking conditions. Metallurgicheskaya i Gornorudnaya Promyshlennost, 2, 95-97.
Newer news items:
- Application of logistic concept for the organization of small academic groups training in higher education institutions - 30/04/2022 13:42
- Transformation of the metallurgical industry of Ukraine from the concept “Industry 4.0” to capitalism of stakeholder - 30/04/2022 13:42
- The cost of formation and problems of effective realization of labor potential in Ukraine - 30/04/2022 13:42
- Strategic diagnostics in the system of controlling the financial results of the enterprise - 30/04/2022 13:42
- Scientific and educational consortium as institutional projection of the innovative professional training - 30/04/2022 13:42
- Multi-criteria evaluation of professional qualities of railway dispatching personnel using computer simulations - 30/04/2022 13:42
- Management of structural changes in the system of economic formation of sustainable development - 30/04/2022 13:42
- Information and communication technologies as a tool and incentive for strategic decision making - 30/04/2022 13:42
Older news items:
- Simulation of cargo delivery by road carrier: case study of the transportation company - 30/04/2022 13:42
- Non-relational approach to developing knowledge bases of expert system prototype - 30/04/2022 13:42
- State policy of Ukraine in the sphere of environmental protection in the context of European integration - 30/04/2022 13:42
- The impact of financial development on accelerating the environmental degradation in Bangladesh - 30/04/2022 13:42
- Research into the properties of poured asphalt from electric furnace slag aggregate - 30/04/2022 13:42
- Improvement of concrete and building mortar technology using secondary mineral resources - 30/04/2022 13:41
- Research on chemical composition of secondary copper anodes obtained from aqueous residues of refining process - 30/04/2022 13:41
- Geological and economic risk assessment for territories of hazardous geological and technogenic processes (exemplified by Solotvyno township) - 30/04/2022 13:41
- Information and analytical support for making well-informed administrative decisions in civil protection system - 30/04/2022 13:41
- Accounting the factor of randomity of social processes in prediction of demand for electric energy - 30/04/2022 13:41
