Investigation of the stress-strain state of mine shaft support under long-term operation
/ 0
- Details
- Parent Category: 2025
- Category: Content №2 2025
- Created on 26 April 2025
- Last Updated on 26 April 2025
- Published on 30 November -0001
- Written by V. P. Shchokin, V. V. Tkachuk, O. V. Aniskov, O. V. Kliatskyi
- Hits: 1673
Authors:
V.P.Shchokin, orcid.org/0000-0001-9709-1831, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.V.Tkachuk*, orcid.org/0000-0002-5879-5147, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.V.Aniskov, orcid.org/0000-0001-9605-2304, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.V.Kliatskyi, orcid.org/0009-0002-4814-0160, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2025, (2): 079 - 087
https://doi.org/10.33271/nvngu/2025-2/079
Abstract:
Purpose. To develop a methodology for assessing and predicting the stress-strain state of mine shaft support under long-term operation to ensure its long-term stability and safety.
Methodology. The research was conducted using an integrated approach that included measurements of the natural pulse electromagnetic field of the Earth (NPEMFE) in the ranges of 2‒7 and 7‒50 kHz, statistical analysis using Pearson’s correlation coefficient and Student’s t-test. The monitoring was carried out at 117 levels of the mine shaft with different measurement steps and the use of three antennas to register signals in different spatial coordinates.
Findings. A strong correlation was found between the level number and signal intensity in both frequency ranges (correlation coefficients 0.989 and 0.993), confirmed by statistically significant Student’s t-test results. High-stress zones were identified at levels 70‒90 and 96‒117, where significant increases in signal intensity were observed, indicating potential risks of support deformation.
Originality. For the first time, a comprehensive approach to assessing the stress-strain state of a mine shaft using frequency-spatial analysis of NPEMFE signals has been proposed, enabling the detection of not only high-stress zones but also areas of potential water saturation in structures.
Practical value. The developed methodology provides non-destructive testing of mine shaft support conditions without drilling operations, reducing operational costs and improving underground safety. The research results enable timely planning of repair works and prevention of emergency situations, ensuring stable operation of mine shafts.
Keywords: stress-strain state, mine shaft support, rock pressure
References.
1. Chistyakov, E. P., Chistyakov, D. E., Fedorenko, O. I., & Mileiko, T. V. (2015). Instructions on the safe conduct of mining operations in American deposits and underground construction sites of Kryvbas. National Research and Development Institute of Mining Engineering of the State Higher Educational Institution “KNU”. Retrieved from https://nigri.dp.ua/wp-content/uploads/2024/12/zaznachennya-shhodo-bezpechnogo-vedennya-girnychyh-robit.pdf
2. Paul, A., Kumar, N., & Singh, A. (2018). Design of support system and stability evaluation for underground workings of Gare Palma Coal Mine – A case study. Modelling, Measurement and Control C, 78, 303-315. https://doi.org/10.18280/mmc_c.780304
3. Huang, W., & Wang, Z. (2021). Mechanical performance evolution and size determination of strip coal pillars with an account of thermo-mechanical coupling in underground coal gasification. International Journal of Rock Mechanics and Mining Sciences, 142. https://doi.org/10.1016/j.ijrmms.2021.104755
4. Moghaddam, R., Belardo, D., Piscsalko, G., & Likins, G. (2019). Quality control of drilled foundations for base cleanliness, concrete integrity, and geometry. ASTM Special Technical Publication. https://doi.org/10.1520/STP161120170198
5. Hoła, J., Schabowicz, K., & Sadowski, L. (2016). Evaluation of adhesion of concrete screed to mine shaft wall by means of nondestructive acoustic methods. Archives of Mining Sciences, 61(4), 803-818.
6. Kazlouski, J., Zhuravkov, M., & Bogdan, S. (2022). Study of sylvinite heterogeneous creep characteristics and their influence on shaft stability. The Mechanical Behavior of Salt X (1st ed.). CRC Press. https://doi.org/10.1201/9781003295808-48
7. Bakum, Z., & Tkachuk, V. (2014). Mining engineers training in context of innovative system of Ukraine. Metallurgical and Mining Industry, 6(5), 29-34.
8. Shchokin, V., & Tkachuk, V. (2014). Automatization of agglomerative production on the base of application of Neuro-Fuzzy controlling systems of the bottom level. Metallurgical and Mining Industry, 6(6), 32-39.
9. Demir, S. (2023). Numerical investigation of the effects of ground motion characteristics on the seismic behavior of liquefiable soil. Periodica Polytechnica Civil Engineering, 67(1), 24-35. https://doi.org/10.3311/PPci.19683
10. Cai, M. (2013). Principles of rock support in burst-prone ground. Tunnelling and Underground Space Technology, 36, 46-56. https://doi.org/10.1016/j.tust.2013.02.003
11. Fang, X., Zhang, F., Shi, Z., Liang, M., & Song, Y. (2022). Research and Application of Multi-Mode Joint Monitoring System for Shaft Wall Deformation. Sensors, 22(17), 6551. https://doi.org/10.3390/s22176551
12. Bröker, K., & Ma, X. (2022). Estimating the least principal stress in a granitic rock mass: Systematic mini-frac tests and elaborated pressure transient analysis. Rock Mechanics and Rock Engineering, 55, 1931-1954. https://doi.org/10.1007/s00603-021-02743-1
13. Kaiser, P. K., & Cai, M. (2012). Design of rock support system under rockburst condition. Journal of Rock Mechanics and Geotechnical Engineering, 4(3), 215-227. https://doi.org/10.3724/SP.J.1235.2012.00215
14. Mohanty, S., & Vandergrift, T. (2012). Long term stability evaluation of an old underground gas storage cavern using unique numerical methods. Tunnelling and Underground Space Technology, 30, 145-154. https://doi.org/10.1016/j.tust.2012.02.015
15. Li, C., Yang, D., Xie, H., Ren, L., & Wang, J. (2023). Size effect of fracture characteristics for anisotropic quasi-brittle geomaterials. International Journal of Mining Science and Technology, 33(2), 201-213. https://doi.org/10.1016/j.ijmst.2022.11.004
16. Wang, P., Zhang, N., Kan, J., Xie, Z., Wei, Q., & Yao, W. (2020). Fiber Bragg Grating Monitoring of Full-bolt Axial Force of the Bolt in the Deep Strong Mining Roadway. Sensors, 20(15), 4242. https://doi.org/10.3390/s20154242
17. OʼBrien, D., Osborne, J. A., Perez-Duenas, E., Cunningham, R., & Li, Z. (2023). Automated crack classification for the CERN underground tunnel infrastructure using deep learning. Tunnelling and Underground Space Technology, 131, 104668. https://doi.org/10.1016/j.tust.2022.104668
18. Zhang, C., Zhu, H., Shi, B., & Liu, L. (2014). Theoretical investigation of interaction between a rectangular plate and fractional viscoelastic foundation. Journal of Rock Mechanics and Geotechnical Engineering, 6(4), 373-379. https://doi.org/10.1016/j.jrmge.2014.04.007
19. Zhu, X., Chen, Y., Zhang, P., Liu, H., Yang, G., Li, J., & Qiu, M. (2024). Development of multi-sensors fusion monitoring system for shaft wall deformation. Measurement Science and Technology, 35(8), 086203. https://doi.org/10.1088/1361-6501/ad4622
20. Huang, M. Q., Ninić, J., & Zhang, Q. B. (2021). BIM, machine learning and computer vision techniques in underground construction: Current status and future perspectives. Tunnelling and Underground Space Technology, 108. https://doi.org/10.1016/j.tust.2020.103677
21. Sdvyzhkova, O., Babets, D., & Smirnov, A. (2014). Rock state assessment at initial stage of longwall mining in terms of poor rocks of Western Donbass. Progressive Technologies of Coal, Coalbed Methane, and Ores Mining, 65-70. https://doi.org/10.1201/b17547-12
22. Stupnik, M., & Kalinichenko, V. (2012). Parameters of shear zone and methods of their conditions control at underground mining of steep-dipping iron ore deposits in Kryvyi Rig basin. Geomechanical Processes During Underground Mining, 15-25. https://doi.org/10.1201/b13157-4
23. Shashenko, O. M., Hapieiev, S. M., Solodiankin, O. V., Holovko, Y. M., Ivanova, H. P., & Solodiankina, O. A. (2021). Prediction of disasters caused by unforeseen influence of natural and technogenic factors on the stability of objects. In Ukrainian Mining Forum 2021: Proceedings of the International Scientific and Technical Conference, 298-308. Retrieved from http://irbis-nbuv.gov.ua/cgi-bin/irbis_nbuv/cgiirbis_64.exe?C21COM=2&I21DBN=UJRN&P21DBN=UJRN&IMAGE_FILE_DOWNLOAD=1&Image_file_name=PDF/Nvngu_2019_1_6.pdf
24. Bondarenko, V., Kovalevska, I., Symanovych, H., Sachko, R., & Sheka, I. (2023). Integrated research into the stress-strain state anomalies, formed and developed in the mass under conditions of high advance velocities of stope faces. IOP Conference Series: Earth and Environmental Science, 1254(1). https://doi.org/10.1088/1755-1315/1254/1/012062
25. Khomenko, O., & Kononenko, M. (2019). Geo-energetics of Ukrainian crystalline shield. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 12-21. https://doi.org/10.29202/nvngu/2019-3/3
26. Hrinov, V., & Khorolskyi, A. (2018). Improving the process of coal extraction based on the parameter optimization of mining equipment. E3S Web of Conferences, 60, Article 00017. https://doi.org/10.1051/e3sconf/20186000017
Newer news items:
- Environmental management: assessing the reliability of ecosystems to ensure their environmental sustainability - 26/04/2025 20:53
- Influence of the protective potential distribution of a steel underground pipeline on electrochemical corrosion processes - 26/04/2025 20:53
- Implementation of a computational experiment for shock interaction of spherical bodies - 26/04/2025 20:53
- Determination of the velocities of the points of the third-class mechanism with three leading links using the graph-analytical method - 26/04/2025 20:53
- System for monitoring the strength and dynamic characteristics of freight wagons in operation - 26/04/2025 20:53
- Effect of heat treatment on the mechanical properties of nylon parts in additive manufacturing - 26/04/2025 20:53
- Si and Mn effect on mechanical properties and linear shrinking of non-magnetic Cu-Al system cast bronzes - 26/04/2025 20:53
- Determination of the causes of rolling surface damage during operation of the railway wheels - 26/04/2025 20:53
- Testing of fine classification sifter in the processing and disposal of mining waste - 26/04/2025 20:53
- Determination of the harmonic distortion value of vibroacoustic signals in the process of drilling operations - 26/04/2025 20:53
Older news items:
- Features of technological factors of well construction based on the example of oil and gas fields - 26/04/2025 20:53
- Providing stability of quarry slopes at combined mining of mineral deposits - 26/04/2025 20:53
- Determining the limiting contour of the quarry based on minimizing the volume of the near-contour ore zone - 26/04/2025 20:53
- Model representation of the influence of hydraulic mixture backwater in the washout chamber on the hydraulic elevator lifting height - 26/04/2025 20:53
- Modern geoelectric surveys along the Mali Heivtsi ‒ Tiachiv profile of the Transcarpathian Trough - 26/04/2025 20:53
- Origin of the over consumption of cyanide during the leaching of the Amesmessa gold ore - 26/04/2025 20:53
- Structure of the gravitational field and gravity-disturbing objects of the South Torgay sedimentary basin - 26/04/2025 20:53
- Estimation of coal field reserves with grading by technical characteristics of coal - 26/04/2025 20:53
