Contact tensions under the sole of rigid deep laying foundations and ground anchors
/ 0
- Details
- Parent Category: 2023
- Category: Content №2 2023
- Created on 28 April 2023
- Last Updated on 28 April 2023
- Published on 30 November -0001
- Written by V. G. Shapoval, H. P. Ivanova, S. N. Hapieiev, V. V. Yanko, S. O. Barsukova
- Hits: 3826
Authors:
V. G. Shapoval, orcid.org/0000-0003-2993-1311, Dnipro University of Technology, Dnipro, Ukraine; Zaporizhzhia branch of State enterprise “State Research Institute of Building Constructions”, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
H.P.Ivanova*, orcid.org/0000-0003-4219-7916, Dnipro University of Technology, Dnipro, Ukraine, e-mail This email address is being protected from spambots. You need JavaScript enabled to view it.
S.N.Hapieiev, orcid.org/0000-0003-0203-7424, Dnipro University of Technology, Dnipro, Ukraine, e-mail This email address is being protected from spambots. You need JavaScript enabled to view it.
V.V.Yanko, orcid.org/0000-0003-1025-3047, Dnipro University of Technology, Dnipro, Ukraine, e-mail This email address is being protected from spambots. You need JavaScript enabled to view it.
S.O.Barsukova, orcid.org/0000-0003-0821-1091, Dnipro University of Technology, Dnipro, Ukraine, e-mail This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (2): 058 - 063
https://doi.org/10.33271/nvngu/2023-2/058
Abstract:
Purpose. To solve the problem of the allocation of contact vertical normal tensions along the sole of a rigid round stamp, located in an elastic isotropic half-space at a certain depth h 0. To compare the obtained solution with the well-known classical result for h = 0, to check the obtained results for adequacy.
Methodology. Based on the analysis of the decision on the stress-strain state of the base, inside which there is a vertical arbitrary load distributed over the area of the circle, the necessary formulas are obtained to solve the problem. An algorithm for constructing an approximate solution has been developed, the essence of which is to use a combination of the boundary element method and the iteration process by S.N.Klepikov. For a number of depths, approximate solutions of the considered problem are obtained.
Findings. The proposed algorithm for the approximate solution of the problem of indenting a round rigid stamp into the upper boundary of an elastic isotropic half-space has good agreement with the exact solution and can be used to solve contact problems. The outlines of the contact stress diagrams depend on the depth at which they are determined – the greater the depth, the flatter the outlines of the diagrams are, while starting from a certain depth, the diagrams of contact stresses practically coincide. The greater the depth is at which the stamp is located, the more force must be applied to obtain equal displacements of the stamp.
Originality. The obtained research results significantly expand the possibilities of solving various problems of soil mechanics and foundation engineering, make it possible to obtain absolutely new results. In particular, a clear dependence of the contact stresses along the sole of a rigid round stamp on the depth at which it is located was identified. In addition, the presented data allow us to designate an absolutely new direction in the calculation of the foundations of ground anchors, namely, the calculation of their deformations.
Practical value. For engineering practice, it is important that the greater the value of Poisson’s ratio of the base is, the greater the contact stresses are, other things being equal.
Keywords: deep laying foundations, contact tensions, hard stamp, ground anchor, base sinking, isotropic half-space
References.
1. International Building Code 2021 (IBC 2021) – UpCodes (n.d.). Retrieved from https://up.codes/viewer/illinois/ibc-2021.
2. Soil Anchors: Overview, History, Components, Applications (n.d.). Retrieved from https://www.embibe.com/exams/soil-anchors/.
3. Geotechnical Engineering Handbook (n.d.). Retrieved from https://ftp.idu.ac.id/wpcontent/uploads/ebook/tdg/TERRAMECHANICS%20AND%20MOBILITY/Geotechnical%20Engineering%20Handbook,%20Volumes%201%20-%203%20(%20PDFDrive%20).pdf.
4. Zaletov, S. (2013). Mathematical modeling of the process of the deformation of an isotropic half-space under the action of distributed load at elastic fixing of the boundary. Proceedings of 6 th International Conference of Young Scientists CSE-2013, 2013, 132-133. Retrieved from http://www.wikicfp.com/cfp/servlet/event.showcfp?eventid=32586©ownerid=4050.
5. Oliveira, M. F. F., Dumont, N. A., & Selvadurai, A. P. S. (2012). Boundary element formulation of axisymmetric problems for an elastic half-space. Engineering Analysis with Boundary Elements, 36(10), 1478-1492.
6. Kachanov, M. L., Shafiro, B., & Tsukrov, I. (n.d.). Handbook of Elasticity Solutions Softcover reprint of hardcover by. Retrieved from https://link.springer.com/book/10.1007/978-94-017-0169-3.
7. Shapoval, A. V., Morklyanik, B. V., Andreev, V. S., Shapoval, V. G., & Kabrel, V. I. (2011). Stress-strain state of the soil half-space, inside which an axisymmetric distributed load is applied. Dnepropetrovsk: Porogi. Retrieved from http://ir.nmu.org.ua/handle/123456789/2912.
8. Korn, G. A., & Korn, T. M. (Eds.). Mathematical Handbook for Scientists and Engineers: Definitions, Theorems, and Formulas for Reference and Review (Dover Civil and Mechanical Engineering) (n.d.). Retrieved from https://www.amazon.com/Mathematical-Handbook-Scientists-Engineers-Definitions/dp/0486411478.
9. Watson, G. N. A treatise on the Theory of Bessel functions. Cambridge: the University Press. Retrieved from https://www.cambridge.org/nl/academic/subjects/mathematics/real-and-complex-analysis/treatise-theory-bessel-functions-2nd-edition-1?format=PB&isbn=9780521483919.
10. Shapoval, V. G., Shapoval, A. V., Morklyanik, B. V., & Andreev, V. S. (2016). Variational methods of boundary elements and splines in contact problems: monograph. Lviv: Ministerstvo obrazovaniya i nauki Ukrainyi, Natsionalnyi Gornyi Universytet.
Newer news items:
- Phenol adsorption onto olive pomace activated carbon: modelling and optimization - 28/04/2023 00:36
- Theoretical and legal aspects of the regulation of environmental and land legal relations in the conditions of martial law in Ukraine - 28/04/2023 00:36
- Social responsibility for the safety and health of employees at work - 28/04/2023 00:36
- Improving the process of occupational risk management according to the Haddon matrix - 28/04/2023 00:36
- Improving the environmental efficiency of glass furnace chimneys using heat recovery technologies - 28/04/2023 00:36
- Investment management and financial development in infrastructure renovation of a sustainable-built environment - 28/04/2023 00:36
- Peculiarities of thermomodernization of the heating system of military infrastructure complexes - 28/04/2023 00:36
- Predicting of vertical displacements of structures of engineering buildings and facilities - 28/04/2023 00:36
- The influence of the impeller design features on the combined operating process of the torque-flow pump - 28/04/2023 00:36
- Inner shear resistance increasing effect of Concrete Canvas in ballasted railway tracks - 28/04/2023 00:36
Older news items:
- Patterns of air mixture movement in the operating area for the annular ejector of pneumatic transportation system - 28/04/2023 00:36
- Using nonlinear ultrasonic measurements to estimate parameters of the sedimentation of slurry solid phase in thickener - 28/04/2023 00:36
- Selection of the means of auxiliary transportation facilities and adaptation of their parameters to specific operation conditions - 28/04/2023 00:36
- Influence of underground mining activities on the topographic surface, case study of Nui Beo Coal Mine (Vietnam) - 28/04/2023 00:36
- Determining technological properties of drilling muds - 28/04/2023 00:36
- Geology, magmatism and specific features of mineralization of Bakyrchik ore field (Eastern Kazakhstan) - 28/04/2023 00:36
- An approach for ranking abandoned mines by the efficient use of their geothermal potential - 28/04/2023 00:36
- Connection of Kryvbas tectonics with natural and technogenic seismicity - 28/04/2023 00:36
