Synthesis of phosphosulphate substance and properties of its structured mixture with quartz sand
- Details
- Category: Content №4 2022
- Last Updated on 29 August 2022
- Published on 30 November -0001
- Hits: 3347
Authors:
R.V.Liutyi, orcid.org/0000-0001-6655-6499, National Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.V.Tyshkovets, orcid.org/0000-0001-9621-5249, National Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.M.Yamshinskij, orcid.org/0000-0002-2293-2939, National Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.Yu.Selivorstov, orcid.org/0000-0002-1916-625X, Ukrainian State University of Science and Technologies, Dnipro, Ukraine
V.G.Ivanov, orcid.org/0000-0002-9216-3493, National University Zaporizhzhia Polytechnic, Zaporizhzhia, Ukraine
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (4): 059 - 065
https://doi.org/10.33271/nvngu/2022-4/059
Abstract:
Purpose. Creation of binder based on orthophosphoric acid and aluminum sulfate, study on its structure and physicochemical patterns of formation, determination of the properties of structured mixtures for the needs of foundry.
Methodology. In the work, X-ray qualitative and quantitative analysis was performed on the Rigaku Ultima IV unit, and differential thermal analysis was performed on the STA 449 C Jupiter synchronous thermal analyzer. Orthophosphoric acid, technical thermal, of 85% concentration, 18-hydrous sulfate of aluminum Al2(SO4)3 18H2O and quartz sand of brand 3K5O3025 were used. The strength of core mixtures was determined on the US-700 unit on standard cylindrical samples with a diameter and height of 50mm. The roughness of the cast surfaces was determined on a profilometer model 107622 with computer processing of the obtained data and construction of profilograms. To determine the propensity of the core mixtures to form caking, a hexagon sample was used according to the method by M.Fedorov. Breakability was determined on standard cylindrical samples with a diameter and height of 50 mm according to the original method described in the text of the article.
Findings. For the first time, the mechanism of formation of aluminum phosphates with binding properties during the interaction of aluminum hydrate crystal sulfate Al2(SO4)3 18H2O with orthophosphoric acid in the temperature range of 100200 has been investigated. The formation is proved of an intermediate phase during heating aluminum hydroxide Al(OH)3, which, in contrast to its sulfate, according to the results of thermodynamic analysis is able to interact with acid. Formation of aluminum in the system of ortho- and metaphosphates, which features binding properties and ensures high strength of samples based on quartz filler, has been established. The thermal transformations of the obtained binder, which consists of a combination of aluminum phosphates with its residual sulfate, are studied. Stages of gradual disintegration of crystal hydrates, formation of new aluminum phosphates and thermal decomposition of residual sulfate are recorded. The tendency to burn and knockout of the developed core mixtures was determined.
Originality. For the first time, a description has been developed of the mechanism of formation of aluminum phosphates with binding properties during the interaction of its sulfate crystal hydrate Al2(SO4)3 18H2O with orthophosphoric acid in the temperature range of 100200.
Practical value. A new inorganic binder from orthophosphoric acid and 18-aqueous aluminum sulfate has been obtained for foundry production. The scheme of its preparation involves preliminary mixing and heating of the specified reagents with the resulting formation of a dry powder material which consists of phosphates and residual aluminum sulfate, and therefore it is called phosphosulfate. The binding has a long shelf life and is introduced into the mixture in a ready-made form while the technology of its production is less energy-intensive and long-lasting compared to the preparation of traditional metal phosphate binding.
Keywords: binding, foundry core, orthophosphoric acid, aluminum sulphate, thermogravimetric analysis, phase analysis, aluminum phosphate
References.
1. Fesenko, M.A., & Fesenko, A.M. (2020). In-Mould Graphitizing, Spheroidizing, and Carbide Stabilizing Inoculation of Cast Iron Melt. Progress in Physics of Metals,1,83-101. https://doi.org/10.15407/ufm.21.01.083.
2. Fesenko, M.A., Kosyachkov, V.A., Fesenko, A.N., & Fesenko,E.V. (2014). Obtaining two-layer and two-sided cast-iron olives by the method of in-mould modification of the melt. Visnik DDMA, 1(32), 149-152.
3. Hryhoriev, S., Petryshchev, A., Belokon, K., Krupey, K., Yamshinskij, M., Fedorov, G., , & Savvin, A. (2018). Determining the physical-chemical characteristics of the carbon-thermal reduction of scale of tungsten high-speed steels. Eastern-European Journal of Enterprise Technologies, 2/6(92), 10-15. https://doi.org/10.15587/1729-4061.2018.125988.
4. Hryhoriev, S., Petryshchev, A., Yamshinskij, M., Shyshkanova, G., Yakimtsov, Yu., Zhuravel, S., , & Goliev, Ye.(2017). Study into properties of the resource-saving chromium-containing briquetted alloying additive from ore raw materials. Eastern-European Journal of Enterprise Technologies, 4/12(88), 38-43. https://doi.org/10.15587/ 1729-4061.2017.108191.
5. Klochikhin, V., & Naumyk, V. (2019). Improvement of technological processes obtaining a heat-resistant nickel alloys for turbine blades using foundry return. Materials science and technology, 1454-1458. https://doi.org/10.74 49/2019/MST_2019_1454_1458.
6. Grimzin, I., Ponomarenko, O., Marynenko, D., Yevtushenko, N., & Berlizeva, T. (2020). The Technological Process of Obtaining Sand-Plaster Molds for Complex Thin-Walled Aluminum Castings. In Tonkonogyi, V. (Ed.). Advanced Manufacturing Processes. Lecture Notes in Mechanical Engineering, (pp. 405-414). InterPartner 2019. https://doi.org/10.1007/978-3-030-40724-7_ 41.
7. Ponomarenko, O., Berlizeva, T., Grimzin, I., Yevtushenko, N., & Lysenko, T. (2020) Strength Properties Control of Mixtures Based on Soluble Glass with Ethereos Solidifiers. In Ivanov, V., Trojanowska,J., Pavlenko, I., Zajac, J., & Perakovi, D. (Eds.). Advances in Design, Simulation and Manufacturing III. DSMIE, 511-521. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-50794-7_50.
8. Mimboe, A.G., Abo, M.T., Djobo, J.N.Y., Tome, S., Kaze, R.C., & Deutou, J.G.N. (2020). Lateritic soil based-compressed earth bricks stabilized with phosphate binder. Journal of Building Engineering, 31, 101465. https://doi.org/10.1016/j.jobe.2020.101465.
9. Li, Ya., Chen, L., Hong, L., Ran, K., Zhan, Yo., & Chen, Q. (2019). Fabrication of porous silicon carbide ceramics at low temperature using aluminum dihydrogen phosphate as binder. Journal of Alloys and Compounds, 785, 838-845. https://doi.org/10.1016/j. jallcom.2019.01.114.
10. Abyzov, V.A. (2017). Refractory Cellular Concrete Based on Phosphate Binder from Waste of Production and Recycling of Aluminum. Procedia Engineering, 206, 783-789. https://doi.org/10.1016/j.proeng.2017.10.551.
11. Abyzov, V.A. (2016), Lightweight Refractory Concrete Based on Aluminum-Magnesium-Phosphate Binder. Procedia Engineering, 150,1440-1445. https://doi.org/10.1016/j.proeng.2016.07.077.
12. Chavda, M.A., Bernal, S.A., Apperley, D.C., Kinoshita, H., & Provis, J.L. (2015). Identification of the hydrate gel phases present in phosphate-modified calcium aluminate binders, Cement and Concrete Research, 70, 21-28. https://doi.org/10.1016/j.cemconres.2015.01.007.
13. Osipenko, I.A., & Repyakh, S.I. (2020). The use of finely dispersed silicon-containing material for dry gas cleaning of ferroalloy production in molding sands. Vesnik KGIU, 4(31), 36-41.
14. Osipenko, I.A., Isagulov, A.Z., & Repyakh, S.I. (2021). Cold hardening mixture for molds and cores. Liteynoye proizvodstvo, 6, 18-21.
15. Osypenko, I.O., Solonenko, L.I., & Bilyy, O.P. (2018). Systematic use of man-made dust in the composition of phosphate cold-curing mixtures. Systemni tekhnolohiyi, 5(118), 97-104. Retrieved from http://dspace.opu.ua/jspui/handle/123456789/8562.
16. Illarionov, I.E., Strelnikov, I.A., & Petrova, N.V. (2012). Metal-phosphate binders and mixtures, features of their curing. Vestnik ChGPU im. I. Ya. Yakovleva, 4(76), part 2,79-85.
17. Volochko, A.T. (2013). Synthesis of refractory ceramics based on a phosphate binder and multicomponent oxide systems. Viesci nacyjananaj akademii navuk Bielarusi. Sieryja fizika-technichnych navuk, 2, 33-40.
18. Yang, Ya. (2017). Preparation method of modified heat-hardened phosphate cast sand mold. (Patent of China No. 106734858 (A)). The State Intellectual Property Office of Peoples Republic of China.
19. Gil, J.Ye., Hee, K.E., Kwan, W.T., & Hyun, L.J. (2018). Method for preparing casting mold with high strength using ternary inorganic binder. (Patent of Korea No. 20180017400 (A)). Korean Intellectual Property Office.
20. Alferyev, S.D., & Polyakov, V.A. (2014). Thermoinsulative and thermocon-ductive concretes based on an aluminophosphate binder (variants). (U.S. Patent No. 2014175323 (A1)). U.S. Patent and Trademark Office.
21. Site about chemistry (20082022). Thermodynamic properties of substances. Retrieved from http://www.Xumuk.ru/tdsv_poisk/search.php.
Newer news items:
- Application of the wavelet transformation theory in the algorithm for constructing a quasigeoid model - 29/08/2022 03:58
- Protection of information resources as an integral part of economic security of the enterprise - 29/08/2022 03:58
- Application of mathematical modelling methods in oil production management - 29/08/2022 03:58
- Accounting and analytical aspects of functioning of enterprises in the context of the introduction of an artificial intelligence system - 29/08/2022 03:58
- Prediction of changes in the vegetation cover of Ukraine due to climate warming - 29/08/2022 03:58
- Problematic issues of attracting criminal responsibility for the crimes against industrial safety - 29/08/2022 03:58
- Ecological estimation of installing geothermal systems on territories of closed coal mines - 29/08/2022 03:58
- Classification of heating conditions in terms of smart control of indoor heating with the use of uncontrolled electric heaters - 29/08/2022 03:58
- The electrical power quality indicator – interference power factor - 29/08/2022 03:58
- Simulation of the process of milling and grinding cylindrical surfaces by an oriented tool in one setup - 29/08/2022 03:58
Older news items:
- Determination of granulometric composition of technogenic raw materials for producing composite fuel - 29/08/2022 03:58
- Forceful interaction of the casing string with the walls of a curvilinear well - 29/08/2022 03:58
- Assessing the impact of underground working (tunneling) in the II section of Seam 14 on surface construction works at Ha Lam Coal Mine (Vietnam) - 29/08/2022 03:58
- Automation of ore quality management in quarries - 29/08/2022 03:58
- Numerical study of microwave impact on gas hydrate plugs in a pipeline - 29/08/2022 03:58
- The methods to calculate expediency of composite degassing pipelines - 29/08/2022 03:58
- Nanostructures of coal beds in the Sherubaynurinsky section of the Karaganda basin - 29/08/2022 03:58
- Seismic geotraverse "Granit" (Ukrainian part). Reanimation - 29/08/2022 03:58
- The use of brown coal in Ukraine to obtain water-soluble sorbents - 29/08/2022 03:58