Search - Науковий вісник НГУ

1. Assessment of the state of the rock mass around the crosscuts under additional deformation disturbances: (Content №2 2024); ... (2): 032 - 037 https://doi.org/10.33271/nvngu/2024-2/032 Abstract: Purpose. Assessment of the level of disturbance of the stress state of the rock mass around the crosscut of the depth of 545 m when ...; Created on 01 May 2024
2. A methodological approach to assessing the durability of welded structures of screens using SolidWorks Simulation software: (Content №6 2023); ... (2018). Electric Pulse Component Effect on the Stress State of AMg6 Aluminum Alloy Welded Joints Under Electrodynamic Treatment. Strength of Materials, 50(2), 246-253. https://doi.org/10.1007/s11223-017-9862-810. ...; Created on 23 December 2023
3. Analysis and prediction of surface settlements during the digging of underground mining works (Algeria): (Content №6 2023); ... M. A., & Nguyen, T. T. (2022). Method for predicting the stress state of the lining of underground structures of quasi-rectangular and arched forms. Journal of Mining Institute, 257, 807-821. https://doi.org/10.31897/PMI.2022.17. ...; Created on 23 December 2023
4. Predicting underground mining impact on the earth’s surface: (Content №1 2023); ... cohesive soils by the seismic method. Physical and technical problems of mineral development, (3), 3-10. 9. Karasev, M. A., & Sotnikov, R. O. (2021). Forecast of the stress state of sprayed concrete ...; Created on 25 February 2023
5. Nanostructures of coal beds in the Sherubaynurinsky section of the Karaganda basin: (Content №4 2022); ... in the conditions of the stress state of coal; change in the conditions of methane diffusion in coal seams and many other phenomena. Practical value. The natural gas content C0 depends linearly on the ...; Created on 29 August 2022
6. Stress state of the grinding tool loaded with tangential force: (Content №3 2022); ... for Superhard Materials, 21, 54-61. 8. Muzychka, D.G. (2018). Analysis of calculation schemes and methods for studying the stress state of the grain-binding system. Novi materialy i tekhnolohii v metalurhii ...; Created on 29 June 2022
7. Determination of stress concentration near the holes under dynamic loadings: (Content №3 2021); ... Universytetu. 2021, (3): 019 - 024 https://doi.org/10.33271/nvngu/2021-3/019 Abstract: Purpose. To develop an approach for determining the stress state of plate structural elements with holes under dynamic ...; Created on 23 June 2021
8. Dynamic loads in self-aligning gear transmissions of heavy loaded machines: (Content №1 2021); ... of air cooled condenser gearbox. Case Studies in Engineering Failure Analysis, 2, 150-156. https://doi.org/10.1016/j.csefa.2014.08.003. 4. Vinogradov, B.V., & Fedin, D.O. (2016). The stress state of ...; Created on 05 March 2021
9. Peculiarities of mining the protecting pillar in the laminal massif of soft rocks: (Contens №5 2020); ... 12. Kovalevska, I., Barabash, M., & Snihur, V. (2018). Development of a research methodology and analysis of the stress state of a parting under the joint and downward mining of coal seams. Mining ...; Created on 30 October 2020
10. Using broadband signals for structural change detection in metal details: (Contens №3 2020); ... determine the stress state in the substrate–coating system under mechanical loads. Strength of Materials, 48(5), 658-667. https://doi.org/10.1007/s11223-016-9809-5. 2. Ropyak, L. Y., Shatskyi, I. ...; Created on 02 July 2020
11. Asymptotic method in two-dimensional problems of electroelasticity: (Content №1 2020); ... analysis of the stress state in an orthotropic piezoelectric medium with a circular crack. Systematic information and information technologies, (3), 117-126. https://doi.org/10.20535/SRIT.2308-8893.2017.3.11. ...; Created on 10 March 2020
12. Two-dimensional elastic theory methods for describing the stress state and the modes of elastic boring: (Content №1 2020); Authors: V.V.Pabyrivskyi, Cand. Sc. (Phys.-Math.), Assoc. Prof., orcid.org/0000-0002-6071-3817, Lviv Polytechnic National University, Lviv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; ...; Created on 10 March 2020
13. Studying coal seam bedding tectonic breach impact on supporting parameters of mine workings with roof bolting: (Mining); ... (4), 21-25. 13. Lobkov, N. I., Mayevsky, V. S., Lobkov, A. A., & Klochko, I. I. (2015). Investigation of changes in the stress state of the roof rocks ahead of the clearing face. Problems ...; Created on 26 October 2019
14. Content: (Contents №5 2017); ... mechanical engineering, machine building 50 A. S. Velychkovych, D. O. Panevnyk. Study of the stress state of the downhole jet pump housing ...; Created on 15 March 2018
15. Way of determining the spatial distribution of stresses along the main pipeline section using ultrasonic method: (Information technologies, systems analysis and administration); ... Lecturer of the Department of Engineering and Computer Graphics, Ivano-Frankivsk, Ukraine, orcid.org/0000-0002-9865-0778 Abstract: Purpose. Determination of the stress state and visualization ...; Created on 11 March 2018
16. Optimization of parameters of overworked mining gallery support while carrying out long-wall face workings: (Mining); ... is to establish the characteristics of changes in the stress state of the rock mass and the degree of influence of the bearing pressure zone in front of the long-wall face onto the underlying area. Practical ...; Created on 11 January 2018
17. Study of the stress state of the downhole jet pump housing: (Geotechnical and mining mechanical engineering, machine building); Authors: A.S.Velychkovych, Cand. Sc. (Tech.), Assoc. Prof., Ivano-Frankivsk National Technical University of Oil and Gas, Associate Professor of the Structural Mechanics Department, Ivano-Frankivsk, ...; Created on 17 November 2017
18. Geomechanical estimation of the effectiveness of sewer tunnel repair by the “pipe in pipe” technology: (Geotechnical and mining mechanical engineering, machine building); ... methods for forecasting the stress state of sewer tunnel linings, reconstructed by the “pipe in pipe” technology, including ones in dense urban areas, the use of which allows geomechanical estimation of ...; Created on 04 August 2016
19. The stress state of heavy loaded open gearing with incomplete tooth contact: (Geotechnical and mining mechanical engineering, machine building); ... tumbling mill open gearing. Methodology. Calculation of the stress state is carried out with the finite element method. At the first stage the design model is formed. Further the construction and ...; Created on 04 August 2016
20. The stiffness of The Open Gearing of Tumbling MillS: (Geotechnical and mining mechanical engineering, machine building); ... Engineering Failure Analysis, no. 44, pp. 179−194. 10. Vinogradov, B.V. and Sladkovskiy, S.A., 2001. The stress state of the tumbling mill open gearing. Metallurgical and Mining Industry, no. 3, pp. ...; Created on 22 June 2016

Start
Prev
1
2
Next
End

Науковий вісник НГУ

Archive

Most read

NEW ON THE SITE

Visitors

Guest Book

Registration data

Contacts