Search - Науковий вісник НГУ

1. Influence of disperse-hardening additive chrome diboride on the structure of carbide matrixes of PDC drill bits: (Content №4 2024); ... Goeke, S., Brümmer, A., Biermann, D., & Bayer, M. (2016). Indication of worn WC/C surface locations of a dry-running twin-screw rotor by the oxygen incorporation in tungsten-related Raman modes. Applied ...; Created on 28 August 2024
2. Long-term thermal productivity of polystyrene concrete in a new composite wall in a fixed formwork: (Content №3 2023); ... 9. Shi, B., Liu, W., Yang, H., & Ling, X. (2020). Long-term performance of timber-concrete composite systems with notch-screw connections. Engineering Structures, 213, 110585. https://doi.org/10.1016/j.engstruct.2020.110585. ...; Created on 27 June 2023
3. Design of double-shoulder threaded joints of drilling string elements: (Content №3 2023); ... the screwing torque/moment and researching the design of double-shoulder threaded joints while preserving their geometric parameters. Determination of the optimal length of the additional shoulder pin ...; Created on 27 June 2023
4. The influence of the impeller design features on the combined operating process of the torque-flow pump: (Content №2 2023); ... S., & Svynarenko, M. (2021). Characteristics improvement of labyrinth screw pump using design modification in screw. Journal of Physics: Conference Series, 1741, 012024. https://doi.org/10.1088/1742-6596/1741/1/012024. ...; Created on 28 April 2023
5. Investigation of the effect of several parameters on the applicability of magnetic separation method: (Content №4 2021); ... 3. Prokopiev, S.A., Pelevin, A.E., Prokopiev, E.S., & Ivanova,K.K. (2019). Increasing the Integrity of Iron-Ore Raw Material Use with the Help of Screw Separation. Izvestiya Vysshikh Uchebnykh Zavedenii. ...; Created on 23 August 2021
6. Analytical and experimental assessment of screw centrifugal pump at improving its design: (Content №4 2021); ... of screw centrifugal type pump at a design stage, which permits defining more precisely its power and cavitation characteristics. Methodology. To achieve the above-mentioned purpose, the technique ...; Created on 23 August 2021
7. Determining the efficient management system for a specialized transport enterprise: (Contens №4 2020); ... conditions and make managerial decisions concerning variation of the number of repair crews, vehicles, and so on. Originality. For the first time, the paper proposes an approach as for the determination ...; Created on 30 August 2020
8. Synthesis and research of the tumbling machine spatial mechanism: (Contens №4 2020); ... Obstacles. International Applied Mechanics, 4(52), 404-412. https://doi.org/10.1007/s10778-016-0765-3. 7. Antonyuk, E. Ya., & Zabuga, A. T. (2016). Movement of an articulated crew with two-dimensional ...; Created on 30 August 2020
9. Predictability of a small-amplitude disturbance of coal seams in Western Donbas: (Contens №4 2020); ... G. (2018). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. Theoretical and Practical Solutions of Mineral Resources Mining, 465-477. https://doi.org/10.1201/b19901-82. ...; Created on 30 August 2020
10. Development and research of thеrmоplаstiс methods for hardening details: (Contens №2 2020); ... Methodology. Experimental studies on the influence of the temperature factor on the hardening process were carried out at a specialized facility developed at the Department of Engineering and Woodworking Technology of CNUT (Chernihiv National University of Technology). The three-roller pneumatic device was mounted on a support of the lathe-screw machine model 1K62. Workpieces were mounted on a special mandrel in a three-jaw chuck. The spindle speed was set using an electronic tachometer; the pressure on the rollers was recorded by a pressure gauge. Before the rolling, the workpiece was kept in a laboratory electric furnace, the preheat temperature was recorded by a logometer. Since the surface quality of surface plastic deformation (SPD) treatment with heating depends on a large number of factors, a central second-order rotatable composite layout was used to obtain the multifactor model. On the basis of a priori information and the results of the previous experiments, the feed (S, mm/rev), pressure (P, H) and preheat temperature (T, °C) were taken as factors determining the process. The surface layer hardness was taken as the initial parameter. ...; Created on 10 May 2020
11. Integrated control system of the thermal power complex using the tensor analysis methods: (Information Technologies, Systems Analysis and Administration); ... & Gruhler, G. (2015). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. In New Developments in Mining Engineering Theoretical and Practical Solutions ...; Created on 26 October 2019
12. Determination of static equilibrium conditions of a mobile terrestrial robotic complex: (Geotechnical and mining mechanical engineering, machine building); ... 9. Min Wang, Tao Zan, Xiangsheng Gao, & Songwei Li (2016). Suppression of the time-varying vibration of ball screws induced from the continuous movement of the nut using multiple tuned mass dampers. ...; Created on 26 October 2019
13. Automation of the control process of the mining machines based on fuzzy logic: (Information Technologies); ... (2015). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources ...; Created on 16 June 2019
14. Enhancing the efficiency of energy generation systems based on solid biofuels: technical and economic aspects: (Power Supply Technologies); ... complex of the solid-fuel heat generator, in particular, to solve the problem of controlling the rotation frequency of the fan and the dosing screw feeder electric drives, determining the volumes of dosing ...; Created on 24 April 2019
15. Method for determining high-speed vehicle contact forces of the ground transport: (Geotechnical and mining mechanical engineering, machine building); ... transport is determined based on program hodograph corresponding to spiral-screw trajectory. Motive force distribution is carried out for two supporting points of a ground transport vehicle. The problem ...; Created on 03 March 2019
16. Defining the dynamic accuracy of positioning of spatial drive systems through consistent analysis of processes of different range of performance: (Geotechnical and mining mechanical engineering, machine building); ... Martin Caudillo-Ramirez and Luciano Perez-Gonzalez, 2015. An Application of Screw Theory to the Jerk Analysis of a Two-Degrees-of-Freedom Parallel Wrist. Robotics, 4, рр. 50‒62. 15. Ho-Seung Jeong ...; Created on 03 July 2018
17. Asymptotic method for investigating resonant regimes of nonlinear bending vibrations of elastic shaft: (Geotechnical and mining mechanical engineering, machine building); ... important practical problems of developing oscillatory engineering systems at the design stage, selecting the elastic characteristics of shafts, counting modes and screw drilling equipment in view of ...; Created on 11 March 2018
18. Analytical methods for determining the effect of the dynamic process on the nonlinear flexural vibrations and the strength of compressed shaft: (Geotechnical and mining mechanical engineering, machine building); ... Universytetu, 3, pp. 62‒67. 4. Gevko, I., 2014. Effect of the dynamic process on the screw stress trained state. Bulletin of Ternopil National Technical University, 74(2), pp. 123‒128. ...; Created on 17 November 2017
19. The research of the torsional vibrations of the screw in terms of impulsive force impacts: (Geotechnical and mining mechanical engineering, machine building); ... torsional vibrations of a screw. Methodology. The methodology is based on the Bubnova-Galorcina’s and Van-der-Pol’s methods combination, which allowed receiving the equations in a standard form in ...; Created on 04 February 2016
20. Fatigue strength of oilwell tubings screwed joints in wells curvelinear sections: (Mining); ... of fatigue straight characteristic of its screwed joints for longevity prediction in curvilinear cased well bore. Methodology. The deformation of oilwell tubings and the normal stresses of the bend, ...; Created on 04 February 2016

Start
Prev
1
2
Next
End

Науковий вісник НГУ

Archive

Most read

NEW ON THE SITE

Visitors

Guest Book

Registration data

Contacts