Search - Науковий вісник НГУ

1. Influence of disperse-hardening additive chrome diboride on the structure of carbide matrixes of PDC drill bits: (Content №4 2024); ... Goeke, S., Brümmer, A., Biermann, D., & Bayer, M. (2016). Indication of worn WC/C surface locations of a dry-running twin-screw rotor by the oxygen incorporation in tungsten-related Raman modes. Applied ...; Created on 28 August 2024
2. Long-term thermal productivity of polystyrene concrete in a new composite wall in a fixed formwork: (Content №3 2023); ... 9. Shi, B., Liu, W., Yang, H., & Ling, X. (2020). Long-term performance of timber-concrete composite systems with notch-screw connections. Engineering Structures, 213, 110585. https://doi.org/10.1016/j.engstruct.2020.110585. ...; Created on 27 June 2023
3. Design of double-shoulder threaded joints of drilling string elements: (Content №3 2023); ... the screwing torque/moment and researching the design of double-shoulder threaded joints while preserving their geometric parameters. Determination of the optimal length of the additional shoulder pin ...; Created on 27 June 2023
4. The influence of the impeller design features on the combined operating process of the torque-flow pump: (Content №2 2023); ... S., & Svynarenko, M. (2021). Characteristics improvement of labyrinth screw pump using design modification in screw. Journal of Physics: Conference Series, 1741, 012024. https://doi.org/10.1088/1742-6596/1741/1/012024. ...; Created on 28 April 2023
5. Investigation of the effect of several parameters on the applicability of magnetic separation method: (Content №4 2021); ... 3. Prokopiev, S.A., Pelevin, A.E., Prokopiev, E.S., & Ivanova,K.K. (2019). Increasing the Integrity of Iron-Ore Raw Material Use with the Help of Screw Separation. Izvestiya Vysshikh Uchebnykh Zavedenii. ...; Created on 23 August 2021
6. Analytical and experimental assessment of screw centrifugal pump at improving its design: (Content №4 2021); ... of screw centrifugal type pump at a design stage, which permits defining more precisely its power and cavitation characteristics. Methodology. To achieve the above-mentioned purpose, the technique ...; Created on 23 August 2021
7. Predictability of a small-amplitude disturbance of coal seams in Western Donbas: (Contens №4 2020); ... G. (2018). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. Theoretical and Practical Solutions of Mineral Resources Mining, 465-477. https://doi.org/10.1201/b19901-82. ...; Created on 30 August 2020
8. Development and research of thеrmоplаstiс methods for hardening details: (Contens №2 2020); ... Methodology. Experimental studies on the influence of the temperature factor on the hardening process were carried out at a specialized facility developed at the Department of Engineering and Woodworking Technology of CNUT (Chernihiv National University of Technology). The three-roller pneumatic device was mounted on a support of the lathe-screw machine model 1K62. Workpieces were mounted on a special mandrel in a three-jaw chuck. The spindle speed was set using an electronic tachometer; the pressure on the rollers was recorded by a pressure gauge. Before the rolling, the workpiece was kept in a laboratory electric furnace, the preheat temperature was recorded by a logometer. Since the surface quality of surface plastic deformation (SPD) treatment with heating depends on a large number of factors, a central second-order rotatable composite layout was used to obtain the multifactor model. On the basis of a priori information and the results of the previous experiments, the feed (S, mm/rev), pressure (P, H) and preheat temperature (T, °C) were taken as factors determining the process. The surface layer hardness was taken as the initial parameter. ...; Created on 10 May 2020
9. Integrated control system of the thermal power complex using the tensor analysis methods: (Information Technologies, Systems Analysis and Administration); ... & Gruhler, G. (2015). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. In New Developments in Mining Engineering Theoretical and Practical Solutions ...; Created on 26 October 2019
10. Determination of static equilibrium conditions of a mobile terrestrial robotic complex: (Geotechnical and mining mechanical engineering, machine building); ... 9. Min Wang, Tao Zan, Xiangsheng Gao, & Songwei Li (2016). Suppression of the time-varying vibration of ball screws induced from the continuous movement of the nut using multiple tuned mass dampers. ...; Created on 26 October 2019
11. Automation of the control process of the mining machines based on fuzzy logic: (Information Technologies); ... (2015). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources ...; Created on 16 June 2019
12. Enhancing the efficiency of energy generation systems based on solid biofuels: technical and economic aspects: (Power Supply Technologies); ... complex of the solid-fuel heat generator, in particular, to solve the problem of controlling the rotation frequency of the fan and the dosing screw feeder electric drives, determining the volumes of dosing ...; Created on 24 April 2019
13. Method for determining high-speed vehicle contact forces of the ground transport: (Geotechnical and mining mechanical engineering, machine building); ... transport is determined based on program hodograph corresponding to spiral-screw trajectory. Motive force distribution is carried out for two supporting points of a ground transport vehicle. The problem ...; Created on 03 March 2019
14. Defining the dynamic accuracy of positioning of spatial drive systems through consistent analysis of processes of different range of performance: (Geotechnical and mining mechanical engineering, machine building); ... Martin Caudillo-Ramirez and Luciano Perez-Gonzalez, 2015. An Application of Screw Theory to the Jerk Analysis of a Two-Degrees-of-Freedom Parallel Wrist. Robotics, 4, рр. 50‒62. 15. Ho-Seung Jeong ...; Created on 03 July 2018
15. Asymptotic method for investigating resonant regimes of nonlinear bending vibrations of elastic shaft: (Geotechnical and mining mechanical engineering, machine building); ... important practical problems of developing oscillatory engineering systems at the design stage, selecting the elastic characteristics of shafts, counting modes and screw drilling equipment in view of ...; Created on 11 March 2018
16. Analytical methods for determining the effect of the dynamic process on the nonlinear flexural vibrations and the strength of compressed shaft: (Geotechnical and mining mechanical engineering, machine building); ... Universytetu, 3, pp. 62‒67. 4. Gevko, I., 2014. Effect of the dynamic process on the screw stress trained state. Bulletin of Ternopil National Technical University, 74(2), pp. 123‒128. ...; Created on 17 November 2017
17. The research of the torsional vibrations of the screw in terms of impulsive force impacts: (Geotechnical and mining mechanical engineering, machine building); ... torsional vibrations of a screw. Methodology. The methodology is based on the Bubnova-Galorcina’s and Van-der-Pol’s methods combination, which allowed receiving the equations in a standard form in ...; Created on 04 February 2016
18. Fatigue strength of oilwell tubings screwed joints in wells curvelinear sections: (Mining); ... of fatigue straight characteristic of its screwed joints for longevity prediction in curvilinear cased well bore. Methodology. The deformation of oilwell tubings and the normal stresses of the bend, ...; Created on 04 February 2016
19. Improvement of energy performance of the electrotechnological comp-lex for production of solid biofuels using neural controller: (Power supply technologies); ... line during connected dispensing of solid biofuel components we have obtained the variance of the mixture and moisture characteristics of the electromechanical actuator-screw extruder with and without ...; Created on 17 October 2013
20. Prospects for development of joints of deep-water vertical pipes of large diameter (reisers). Threaded connections of raisers: (Geotechnical and mining mechanical engineering, machine building); Authors: T.A. Kuznetsova, K.A. Ziborov, L.I. Chernukha, V.N. Maryenko When drilling and extracting minerals from deep sea they use standpipe compose from pipes of 12 meters ...; Created on 26 December 2012

Start
Prev
1
2
Next
End

Науковий вісник НГУ

Archive

Most read

NEW ON THE SITE

Visitors

Guest Book

Registration data

Contacts