- 1. Improvement of the method of time rationing for assembling car groups on one track
- (Content №1 2024)
- ... joints with special fiber-glass reinforced synthetic fishplates using in continuously welded tracks. Pollack Periodica, 13(2), 77-86. https://doi.org/10.1556/606.2018.13.2.8. ...
- Created on 29 February 2024
- 2. Influence of ice structure on vitability of frozen sand-water and sand-clay mixtures
- (Content №1 2024)
- ... artificial freezing of soils for underground constructions. Methodology. In this research, sand, clay, and water are used. Ice quality is estimated visually after water freezing at -15 °C in glass tubes. ...
- Created on 29 February 2024
- 3. Recycling of barite ore tailings into porcelain: microstructure and dielectric properties
- (Content №6 2023)
- ... & Morsy, M. A. (2020). The impact of barium oxide on physical, structural, optical, and shielding features of sodium zinc borate glass. Journal of Non-Crystalline Solids, 541, 120090. https://doi.org/10.1016/j.jnoncrysol.2020.120090. ...
- Created on 23 December 2023
- 4. Geophysical indicators of rare-metal ore content of Akmai-Katpar ore zone (Central Kazakhstan)
- (Content №5 2023)
- ... occur. Keywords: ore zone, rare metals, petrophysical characteristics, geophysical anomalies, gravity field, magnetic field References. 1. Aidarbekov, Zh. K., Istekova, S. A., & Glass, H. (2021). ...
- Created on 27 October 2023
- 5. Improving the environmental efficiency of glass furnace chimneys using heat recovery technologies
- (Content №2 2023)
- ... dispersing harmful emissions from thermal-energy plants in the environment were used. Findings. Calculative studies were carried out on improving the chimneys operation safety of glass furnaces of regenerative ...
- Created on 28 April 2023
- 6. Determination of the deformation parameters of the steel reinforcing phase inside the aluminum matrix during hot rolling
- (Content №6 2022)
- ... https://doi.org/10.1016/j.msea.2012.04.089. 18. Grydin, O., Stolbchenko, M., & Schaper, M. (2016). Twin-roll casting of carbon fiber-reinforced and glass fiber-reinforced aluminum strips. InLight ...
- Created on 25 December 2022
- 7. Phenomena and mechanism of slagging and corrosion in energy use of coal with a high content of salts
- (Content №5 2022)
- ... https://doi.org/10.1016/j.fuel.2016.02.072. 32. George, S.M., Haycock, P.W., & Ormerod, R.M. (2018). The Mechanism of Corrosion of Aluminium Zirconium Silicate (AZS) material in the Float Glass Furnace ...
- Created on 30 October 2022
- 8. Synthesis of phosphosulphate substance and properties of its structured mixture with quartz sand
- (Content №4 2022)
- ... 41. 7. Ponomarenko, O., Berlizeva, T., Grimzin, I., Yevtushenko, N., & Lysenko, T. (2020) Strength Properties Control of Mixtures Based on Soluble Glass with Ethereos Solidifiers. In Ivanov, V., Trojanowska,J., ...
- Created on 29 August 2022
- 9. Prospects of using the polymetallic ore processing waist for producing hardening mixtures
- (Content №3 2022)
- ... 4. Melkonian, R.H. (2017). Environmental problems of mining waste disposal for glass production and construction industry. Vestnik nauki i obrazovaniia Severo-Zapada Rossii, 3(1). ISSN: 2413-9858. ...
- Created on 29 June 2022
- 10. Estimation of glass lubricant viscosity for hot extrusion of Cr-Ni steel and Ni alloy tubes
- (Content №1 2022)
- ... текст / full article Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (1): 033 - 037 https://doi.org/10.33271/nvngu/2022-1/033 Abstract: Purpose. Estimation of optimal viscosity of a glass ...
- Created on 25 February 2022
- 11. Formation of converging cylindrical detonation front
- (Content №6 2021)
- ... Chornaya metallurgiya, (12), 84-89. 20. Glass, I.I. (1977). Shock waves and the man: monograph. Moscow: Mir. 21. Rubidge, S., & Skews, B. (2014) Shear-layer instability in the Mach reflection of shock ...
- Created on 29 December 2021
- 12. Choosing injectable solution for auger technology of underground space protection against pollution
- (Content №5 2021)
- ... regularities of changes in water absorption and time of plastic strength setting when varying the composition of the anti-filtration shield (concentration of fiber, bentonite, water glass); development ...
- Created on 29 October 2021
- 13. Analytical and experimental assessment of screw centrifugal pump at improving its design
- (Content №4 2021)
- ... S.M., Appleby, J.W., & Leonard, T.G. (2017). Turbopump with a single piece housing and a smooth enamel glass surface. (USA Patent No. US20190032604A1 USA F02K9/46). 2. Borodin, G.К., Petrov, A.I., ...
- Created on 23 August 2021
- 14. Water resistance of structured sand-sodium-silicate mixtures
- (Content №4 2021)
- ... steam-microwave solidification, rod References. 1. Matvienko, A.V. (2019). The use of liquid glass. Science and education, 9(44), 41-42. Retrieved from https://cyberleninka.ru/article/n/primenenie-zhidkogo-stekla/viewer. ...
- Created on 23 August 2021
- 15. Investigation of the possibility of reducing errors in determining the coordinates of objects indoors by multi-frequency method
- (Content №1 2021)
- ... 8. Baek, J., & Choi, Yo. (2020). Smart glasses-based personnel proximity warning system for improving pedestrian safety in construction and mining sites. International Journal of Environmental Research ...
- Created on 05 March 2021
- 16. Kinetics of quartz sand and its mixtures drying by microwave radiation
- (Content №1 2021)
- ... Rusevich, O.A. (2018). Improving the efficiency of using liquid-glass mixtures. Part 4. Combined strengthening. Foundry production and metallurgy, 4(93), 38-44. https://doi.org/10.21122/1638-6065-2018-4-38-44. ...
- Created on 05 March 2021
- 17. Increasing the efficiency of water shut-off in oil wells using sodium silicate
- (Content №1 2021)
- ... of sodium silicate and hydration of a micro-cement solution in reservoir conditions on full-scale models. The gel compound included sodium silicate (Na2SiO3, also referred to as liquid glass) and an aluminum ...
- Created on 05 March 2021
- 18. Dynamic analysis of thin laminated viscoelastic structures under elevated temperature using finite element modeling
- (Content №6 2020)
- ... the core layer is made of plasticized polyvinyl butyral, which is a viscoelastic material, whereas both constraining layers are made of isotropic structural material silica float glass. Methodology. Finite ...
- Created on 22 December 2020
- 19. Sodium silicate solute foaming in a flat slot-type capillary under microwave radiation influence
- (Content №6 2020)
- ... A mass transferring mechanism during liquid glass foaming in flat slot-type capillary under microwave radiation influence has been determined. Methodology. Sodium soda silicate solute with silicate module ...
- Created on 22 December 2020
- 20. Carbonization and crushability of structured sand-sodium-silicate mixtures
- (Contens №5 2020)
- ... Methodology. Determination of ultimate compressive strength and crushability resistance was carried out on samples with dimensions of Æ50 ´ 50 mm. The samples were prepared from mixtures of quartz sand and 5 % by weight of binder material (sand-sodium-silicate mixture, phenol-formaldehyde resin), as well as quartz sand cladding with sand-sodium-silicate mixture. Sand-sodium-silicate mixture carbonization kinetics was studied in a layer of hollow glass balls, previously clad with liquid sodium sand-sodium-silicate mixture. Excerpt and determination of ball mass as per duration of their staying in the air were carried out in a climatic chamber. Ball surface appearance was recorded by microscopic photographing with an up to 25 times magnification. Influence of materials-modifiers on dehydrated sodium silicate solute carbonization was investigated by visual assessment of cladding layer surface of glass balls. For this matter, glass balls of Æ10 mm were cladded with pure or modified sodium silicate solute followed by air drying for 6 hours. Cladding layer surface quality was evaluated after 48 hours of exposure in the climate chamber at 24–28 °C with 60–85 % relative humidity. ...
- Created on 30 October 2020